/qtbase

Permalink
Switch branches/tags
Nothing to show
Find file
qtbase/src/corelib/kernel/qcoreapplication.cpp
Fetching contributors…
Cannot retrieve contributors at this time
Raw Blame History
2739 lines (2268 sloc) 87.5 KB
/****************************************************************************
**
** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the QtCore module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL21$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia. For licensing terms and
** conditions see http://qt.digia.com/licensing. For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 or version 3 as published by the Free
** Software Foundation and appearing in the file LICENSE.LGPLv21 and
** LICENSE.LGPLv3 included in the packaging of this file. Please review the
** following information to ensure the GNU Lesser General Public License
** requirements will be met: https://www.gnu.org/licenses/lgpl.html and
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights. These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** $QT_END_LICENSE$
**
****************************************************************************/
#include "qcoreapplication.h"
#include "qcoreapplication_p.h"
#ifndef QT_NO_QOBJECT
#include "qabstracteventdispatcher.h"
#include "qcoreevent.h"
#include "qeventloop.h"
#endif
#include "qcorecmdlineargs_p.h"
#include <qdatastream.h>
#include <qdebug.h>
#include <qdir.h>
#include <qfile.h>
#include <qfileinfo.h>
#include <qhash.h>
#include <qmutex.h>
#include <private/qloggingregistry_p.h>
#include <private/qprocess_p.h>
#include <qstandardpaths.h>
#include <qtextcodec.h>
#ifndef QT_NO_QOBJECT
#include <qthread.h>
#include <qthreadpool.h>
#include <qthreadstorage.h>
#include <private/qthread_p.h>
#endif
#include <qelapsedtimer.h>
#include <qlibraryinfo.h>
#include <qvarlengtharray.h>
#include <private/qfactoryloader_p.h>
#include <private/qfunctions_p.h>
#include <private/qlocale_p.h>
#include <private/qhooks_p.h>
#ifndef QT_NO_QOBJECT
#if defined(Q_OS_UNIX)
# if defined(Q_OS_BLACKBERRY)
# include "qeventdispatcher_blackberry_p.h"
# include <process.h>
# include <unistd.h>
# else
# if !defined(QT_NO_GLIB)
# include "qeventdispatcher_glib_p.h"
# endif
# include "qeventdispatcher_unix_p.h"
# endif
#endif
#ifdef Q_OS_WIN
# ifdef Q_OS_WINRT
# include "qeventdispatcher_winrt_p.h"
# include "qfunctions_winrt.h"
# include <wrl.h>
# include <Windows.ApplicationModel.core.h>
using namespace ABI::Windows::ApplicationModel::Core;
using namespace Microsoft::WRL;
# else
# include "qeventdispatcher_win_p.h"
# endif
#endif
#endif // QT_NO_QOBJECT
#ifdef Q_OS_MAC
# include "qcore_mac_p.h"
#endif
#include <stdlib.h>
#ifdef Q_OS_UNIX
# include <locale.h>
# include <unistd.h>
# include <sys/types.h>
#endif
#ifdef Q_OS_VXWORKS
# include <taskLib.h>
#endif
#include <algorithm>
QT_BEGIN_NAMESPACE
#ifndef QT_NO_QOBJECT
class QMutexUnlocker
{
public:
inline explicit QMutexUnlocker(QMutex *m)
: mtx(m)
{ }
inline ~QMutexUnlocker() { unlock(); }
inline void unlock() { if (mtx) mtx->unlock(); mtx = 0; }
private:
Q_DISABLE_COPY(QMutexUnlocker)
QMutex *mtx;
};
#endif
#if defined(Q_OS_WIN) || defined(Q_OS_MAC)
extern QString qAppFileName();
#endif
#if QT_VERSION >= 0x060000
# error "Bump QCoreApplicatoinPrivate::app_compile_version to 0x060000"
#endif
int QCoreApplicationPrivate::app_compile_version = 0x050000; //we don't know exactly, but it's at least 5.0.0
bool QCoreApplicationPrivate::setuidAllowed = false;
#if !defined(Q_OS_WIN)
#ifdef Q_OS_MAC
QString QCoreApplicationPrivate::macMenuBarName()
{
QString bundleName;
CFTypeRef string = CFBundleGetValueForInfoDictionaryKey(CFBundleGetMainBundle(), CFSTR("CFBundleName"));
if (string)
bundleName = QCFString::toQString(static_cast<CFStringRef>(string));
return bundleName;
}
#endif
QString QCoreApplicationPrivate::appName() const
{
QString applicationName;
#ifdef Q_OS_MAC
applicationName = macMenuBarName();
#endif
if (applicationName.isEmpty() && argv[0]) {
char *p = strrchr(argv[0], '/');
applicationName = QString::fromLocal8Bit(p ? p + 1 : argv[0]);
}
return applicationName;
}
#endif
QString *QCoreApplicationPrivate::cachedApplicationFilePath = 0;
bool QCoreApplicationPrivate::checkInstance(const char *function)
{
bool b = (QCoreApplication::self != 0);
if (!b)
qWarning("QApplication::%s: Please instantiate the QApplication object first", function);
return b;
}
void QCoreApplicationPrivate::processCommandLineArguments()
{
int j = argc ? 1 : 0;
for (int i = 1; i < argc; ++i) {
if (argv[i] && *argv[i] != '-') {
argv[j++] = argv[i];
continue;
}
QByteArray arg = argv[i];
if (arg.startsWith("--"))
arg.remove(0, 1);
if (arg.startsWith("-qmljsdebugger=")) {
qmljs_debug_arguments = QString::fromLocal8Bit(arg.right(arg.length() - 15));
} else if (arg == "-qmljsdebugger" && i < argc - 1) {
++i;
qmljs_debug_arguments = QString::fromLocal8Bit(argv[i]);
} else {
argv[j++] = argv[i];
}
}
if (j < argc) {
argv[j] = 0;
argc = j;
}
}
// Support for introspection
#ifndef QT_NO_QOBJECT
QSignalSpyCallbackSet Q_CORE_EXPORT qt_signal_spy_callback_set = { 0, 0, 0, 0 };
void qt_register_signal_spy_callbacks(const QSignalSpyCallbackSet &callback_set)
{
qt_signal_spy_callback_set = callback_set;
}
#endif
extern "C" void Q_CORE_EXPORT qt_startup_hook()
{
}
typedef QList<QtStartUpFunction> QStartUpFuncList;
Q_GLOBAL_STATIC(QStartUpFuncList, preRList)
typedef QList<QtCleanUpFunction> QVFuncList;
Q_GLOBAL_STATIC(QVFuncList, postRList)
#ifndef QT_NO_QOBJECT
static QBasicMutex globalPreRoutinesMutex;
#endif
/*!
\internal
Adds a global routine that will be called from the QCoreApplication
constructor. The public API is Q_COREAPP_STARTUP_FUNCTION.
*/
void qAddPreRoutine(QtStartUpFunction p)
{
QStartUpFuncList *list = preRList();
if (!list)
return;
// Due to C++11 parallel dynamic initialization, this can be called
// from multiple threads.
#ifndef QT_NO_THREAD
QMutexLocker locker(&globalPreRoutinesMutex);
#endif
if (QCoreApplication::instance())
p();
list->prepend(p); // in case QCoreApplication is re-created, see qt_call_pre_routines
}
void qAddPostRoutine(QtCleanUpFunction p)
{
QVFuncList *list = postRList();
if (!list)
return;
list->prepend(p);
}
void qRemovePostRoutine(QtCleanUpFunction p)
{
QVFuncList *list = postRList();
if (!list)
return;
list->removeAll(p);
}
static void qt_call_pre_routines()
{
QStartUpFuncList *list = preRList();
if (!list)
return;
#ifndef QT_NO_THREAD
QMutexLocker locker(&globalPreRoutinesMutex);
#endif
// Unlike qt_call_post_routines, we don't empty the list, because
// Q_COREAPP_STARTUP_FUNCTION is a macro, so the user expects
// the function to be executed every time QCoreApplication is created.
for (int i = 0; i < list->count(); ++i)
list->at(i)();
}
void Q_CORE_EXPORT qt_call_post_routines()
{
QVFuncList *list = 0;
QT_TRY {
list = postRList();
} QT_CATCH(const std::bad_alloc &) {
// ignore - if we can't allocate a post routine list,
// there's a high probability that there's no post
// routine to be executed :)
}
if (!list)
return;
while (!list->isEmpty())
(list->takeFirst())();
}
// initialized in qcoreapplication and in qtextstream autotest when setlocale is called.
static bool qt_locale_initialized = false;
#ifndef QT_NO_QOBJECT
// app starting up if false
bool QCoreApplicationPrivate::is_app_running = false;
// app closing down if true
bool QCoreApplicationPrivate::is_app_closing = false;
Q_CORE_EXPORT uint qGlobalPostedEventsCount()
{
QThreadData *currentThreadData = QThreadData::current();
return currentThreadData->postEventList.size() - currentThreadData->postEventList.startOffset;
}
QAbstractEventDispatcher *QCoreApplicationPrivate::eventDispatcher = 0;
#ifdef Q_OS_UNIX
Qt::HANDLE qt_application_thread_id = 0;
#endif
#endif // QT_NO_QOBJECT
QCoreApplication *QCoreApplication::self = 0;
uint QCoreApplicationPrivate::attribs = (1 << Qt::AA_SynthesizeMouseForUnhandledTouchEvents);
struct QCoreApplicationData {
QCoreApplicationData() {
#ifndef QT_NO_LIBRARY
app_libpaths = 0;
#endif
}
~QCoreApplicationData() {
#ifndef QT_NO_LIBRARY
delete app_libpaths;
#endif
#ifndef QT_NO_QOBJECT
// cleanup the QAdoptedThread created for the main() thread
if (QCoreApplicationPrivate::theMainThread) {
QThreadData *data = QThreadData::get2(QCoreApplicationPrivate::theMainThread);
data->deref(); // deletes the data and the adopted thread
}
#endif
}
#ifdef Q_OS_BLACKBERRY
//The QCoreApplicationData struct is only populated on demand, because it is rarely needed and would
//affect startup time
void loadManifest() {
static bool manifestLoadAttempt = false;
if (manifestLoadAttempt)
return;
manifestLoadAttempt = true;
QFile metafile(QStringLiteral("app/META-INF/MANIFEST.MF"));
if (!metafile.open(QIODevice::ReadOnly)) {
qWarning() << Q_FUNC_INFO << "Could not open application metafile for reading";
} else {
while (!metafile.atEnd() && (application.isEmpty() || applicationVersion.isEmpty() || orgName.isEmpty())) {
QByteArray line = metafile.readLine();
if (line.startsWith("Application-Name:"))
application = QString::fromUtf8(line.mid(18).trimmed());
else if (line.startsWith("Application-Version:"))
applicationVersion = QString::fromUtf8(line.mid(21).trimmed());
else if (line.startsWith("Package-Author:"))
orgName = QString::fromUtf8(line.mid(16).trimmed());
}
metafile.close();
}
}
#endif
QString orgName, orgDomain, application;
QString applicationVersion;
#ifndef QT_NO_LIBRARY
QStringList *app_libpaths;
#endif
};
Q_GLOBAL_STATIC(QCoreApplicationData, coreappdata)
#ifndef QT_NO_QOBJECT
static bool quitLockRefEnabled = true;
#endif
QCoreApplicationPrivate::QCoreApplicationPrivate(int &aargc, char **aargv, uint flags)
:
#ifndef QT_NO_QOBJECT
QObjectPrivate(),
#endif
argc(aargc)
, argv(aargv)
#ifdef Q_OS_WIN
, origArgc(aargc)
, origArgv(new char *[aargc])
#endif
, application_type(QCoreApplicationPrivate::Tty)
#ifndef QT_NO_QOBJECT
, in_exec(false)
, aboutToQuitEmitted(false)
, threadData_clean(false)
#else
, q_ptr(0)
#endif
{
app_compile_version = flags & 0xffffff;
static const char *const empty = "";
if (argc == 0 || argv == 0) {
argc = 0;
argv = (char **)&empty;
}
#ifdef Q_OS_WIN
std::copy(argv, argv + argc, origArgv);
#endif
#ifndef QT_NO_QOBJECT
QCoreApplicationPrivate::is_app_closing = false;
# if defined(Q_OS_UNIX)
if (!setuidAllowed && (geteuid() != getuid()))
qFatal("FATAL: The application binary appears to be running setuid, this is a security hole.");
# endif // Q_OS_UNIX
# if defined(Q_OS_UNIX)
qt_application_thread_id = QThread::currentThreadId();
# endif
// note: this call to QThread::currentThread() may end up setting theMainThread!
if (QThread::currentThread() != theMainThread)
qWarning("WARNING: QApplication was not created in the main() thread.");
#endif
}
QCoreApplicationPrivate::~QCoreApplicationPrivate()
{
#ifndef QT_NO_QOBJECT
cleanupThreadData();
#endif
#ifdef Q_OS_WIN
delete [] origArgv;
#endif
QCoreApplicationPrivate::clearApplicationFilePath();
}
#ifndef QT_NO_QOBJECT
void QCoreApplicationPrivate::cleanupThreadData()
{
if (threadData && !threadData_clean) {
#ifndef QT_NO_THREAD
void *data = &threadData->tls;
QThreadStorageData::finish((void **)data);
#endif
// need to clear the state of the mainData, just in case a new QCoreApplication comes along.
QMutexLocker locker(&threadData->postEventList.mutex);
for (int i = 0; i < threadData->postEventList.size(); ++i) {
const QPostEvent &pe = threadData->postEventList.at(i);
if (pe.event) {
--pe.receiver->d_func()->postedEvents;
pe.event->posted = false;
delete pe.event;
}
}
threadData->postEventList.clear();
threadData->postEventList.recursion = 0;
threadData->quitNow = false;
threadData_clean = true;
}
}
void QCoreApplicationPrivate::createEventDispatcher()
{
Q_Q(QCoreApplication);
#if defined(Q_OS_UNIX)
# if defined(Q_OS_BLACKBERRY)
eventDispatcher = new QEventDispatcherBlackberry(q);
# else
# if !defined(QT_NO_GLIB)
if (qEnvironmentVariableIsEmpty("QT_NO_GLIB") && QEventDispatcherGlib::versionSupported())
eventDispatcher = new QEventDispatcherGlib(q);
else
# endif
eventDispatcher = new QEventDispatcherUNIX(q);
# endif
#elif defined(Q_OS_WINRT)
eventDispatcher = new QEventDispatcherWinRT(q);
#elif defined(Q_OS_WIN)
eventDispatcher = new QEventDispatcherWin32(q);
#else
# error "QEventDispatcher not yet ported to this platform"
#endif
}
void QCoreApplicationPrivate::eventDispatcherReady()
{
}
QThread *QCoreApplicationPrivate::theMainThread = 0;
QThread *QCoreApplicationPrivate::mainThread()
{
Q_ASSERT(theMainThread != 0);
return theMainThread;
}
void QCoreApplicationPrivate::checkReceiverThread(QObject *receiver)
{
QThread *currentThread = QThread::currentThread();
QThread *thr = receiver->thread();
Q_ASSERT_X(currentThread == thr || !thr,
"QCoreApplication::sendEvent",
QString::fromLatin1("Cannot send events to objects owned by a different thread. "
"Current thread %1. Receiver '%2' (of type '%3') was created in thread %4")
.arg(QString::number((quintptr) currentThread, 16))
.arg(receiver->objectName())
.arg(QLatin1String(receiver->metaObject()->className()))
.arg(QString::number((quintptr) thr, 16))
.toLocal8Bit().data());
Q_UNUSED(currentThread);
Q_UNUSED(thr);
}
#endif // QT_NO_QOBJECT
void QCoreApplicationPrivate::appendApplicationPathToLibraryPaths()
{
#ifndef QT_NO_LIBRARY
QStringList *app_libpaths = coreappdata()->app_libpaths;
if (!app_libpaths)
coreappdata()->app_libpaths = app_libpaths = new QStringList;
QString app_location = QCoreApplication::applicationFilePath();
app_location.truncate(app_location.lastIndexOf(QLatin1Char('/')));
#ifdef Q_OS_WINRT
if (app_location.isEmpty())
app_location.append(QLatin1Char('/'));
#endif
app_location = QDir(app_location).canonicalPath();
if (QFile::exists(app_location) && !app_libpaths->contains(app_location))
app_libpaths->append(app_location);
#endif
}
QString qAppName()
{
if (!QCoreApplicationPrivate::checkInstance("qAppName"))
return QString();
return QCoreApplication::instance()->d_func()->appName();
}
void QCoreApplicationPrivate::initLocale()
{
if (qt_locale_initialized)
return;
qt_locale_initialized = true;
#ifdef Q_OS_UNIX
setlocale(LC_ALL, "");
#endif
}
/*!
\class QCoreApplication
\inmodule QtCore
\brief The QCoreApplication class provides an event loop for Qt
applications without UI.
This class is used by non-GUI applications to provide their event
loop. For non-GUI application that uses Qt, there should be exactly
one QCoreApplication object. For GUI applications, see
QApplication.
QCoreApplication contains the main event loop, where all events
from the operating system (e.g., timer and network events) and
other sources are processed and dispatched. It also handles the
application's initialization and finalization, as well as
system-wide and application-wide settings.
\section1 The Event Loop and Event Handling
The event loop is started with a call to exec(). Long running
operations can call processEvents() to keep the application
responsive.
In general, we recommend that you create a QCoreApplication or a
QApplication object in your \c main() function as early as
possible. exec() will not return until the event loop exits; e.g.,
when quit() is called.
Several static convenience functions are also provided. The
QCoreApplication object is available from instance(). Events can
be sent or posted using sendEvent(), postEvent(), and
sendPostedEvents(). Pending events can be removed with
removePostedEvents() or flushed with flush().
The class provides a quit() slot and an aboutToQuit() signal.
\section1 Application and Library Paths
An application has an applicationDirPath() and an
applicationFilePath(). Library paths (see QLibrary) can be retrieved
with libraryPaths() and manipulated by setLibraryPaths(), addLibraryPath(),
and removeLibraryPath().
\section1 Internationalization and Translations
Translation files can be added or removed
using installTranslator() and removeTranslator(). Application
strings can be translated using translate(). The QObject::tr()
and QObject::trUtf8() functions are implemented in terms of
translate().
\section1 Accessing Command Line Arguments
The command line arguments which are passed to QCoreApplication's
constructor should be accessed using the arguments() function.
Note that some arguments supplied by the user may have been
processed and removed by QCoreApplication.
For more advanced command line option handling, create a QCommandLineParser.
\section1 Locale Settings
On Unix/Linux Qt is configured to use the system locale settings by
default. This can cause a conflict when using POSIX functions, for
instance, when converting between data types such as floats and
strings, since the notation may differ between locales. To get
around this problem, call the POSIX function \c{setlocale(LC_NUMERIC,"C")}
right after initializing QApplication or QCoreApplication to reset
the locale that is used for number formatting to "C"-locale.
\sa QGuiApplication, QAbstractEventDispatcher, QEventLoop,
{Semaphores Example}, {Wait Conditions Example}
*/
/*!
\fn static QCoreApplication *QCoreApplication::instance()
Returns a pointer to the application's QCoreApplication (or
QApplication) instance.
If no instance has been allocated, \c null is returned.
*/
/*!
\internal
*/
QCoreApplication::QCoreApplication(QCoreApplicationPrivate &p)
#ifdef QT_NO_QOBJECT
: d_ptr(&p)
#else
: QObject(p, 0)
#endif
{
init();
// note: it is the subclasses' job to call
// QCoreApplicationPrivate::eventDispatcher->startingUp();
}
#ifndef QT_NO_QOBJECT
/*!
Flushes the platform specific event queues.
If you are doing graphical changes inside a loop that does not
return to the event loop on asynchronous window systems like X11
or double buffered window systems like Quartz (OS X and iOS), and you want to
visualize these changes immediately (e.g. Splash Screens), call
this function.
\sa sendPostedEvents()
*/
void QCoreApplication::flush()
{
if (self && self->d_func()->eventDispatcher)
self->d_func()->eventDispatcher->flush();
}
#endif
/*!
Constructs a Qt kernel application. Kernel applications are
applications without a graphical user interface. These type of
applications are used at the console or as server processes.
The \a argc and \a argv arguments are processed by the application,
and made available in a more convenient form by the arguments()
function.
\warning The data referred to by \a argc and \a argv must stay valid
for the entire lifetime of the QCoreApplication object. In addition,
\a argc must be greater than zero and \a argv must contain at least
one valid character string.
*/
QCoreApplication::QCoreApplication(int &argc, char **argv
#ifndef Q_QDOC
, int _internal
#endif
)
#ifdef QT_NO_QOBJECT
: d_ptr(new QCoreApplicationPrivate(argc, argv, _internal))
#else
: QObject(*new QCoreApplicationPrivate(argc, argv, _internal))
#endif
{
init();
#ifndef QT_NO_QOBJECT
QCoreApplicationPrivate::eventDispatcher->startingUp();
#endif
}
// ### move to QCoreApplicationPrivate constructor?
void QCoreApplication::init()
{
d_ptr->q_ptr = this;
Q_D(QCoreApplication);
QCoreApplicationPrivate::initLocale();
Q_ASSERT_X(!self, "QCoreApplication", "there should be only one application object");
QCoreApplication::self = this;
QLoggingRegistry::instance()->init();
#ifndef QT_NO_QOBJECT
// use the event dispatcher created by the app programmer (if any)
if (!QCoreApplicationPrivate::eventDispatcher)
QCoreApplicationPrivate::eventDispatcher = d->threadData->eventDispatcher.load();
// otherwise we create one
if (!QCoreApplicationPrivate::eventDispatcher)
d->createEventDispatcher();
Q_ASSERT(QCoreApplicationPrivate::eventDispatcher != 0);
if (!QCoreApplicationPrivate::eventDispatcher->parent()) {
QCoreApplicationPrivate::eventDispatcher->moveToThread(d->threadData->thread);
QCoreApplicationPrivate::eventDispatcher->setParent(this);
}
d->threadData->eventDispatcher = QCoreApplicationPrivate::eventDispatcher;
d->eventDispatcherReady();
#endif
#ifndef QT_NO_LIBRARY
if (coreappdata()->app_libpaths)
d->appendApplicationPathToLibraryPaths();
#endif
#ifndef QT_NO_QOBJECT
#if defined(Q_OS_UNIX) && !(defined(QT_NO_PROCESS))
// Make sure the process manager thread object is created in the main
// thread.
QProcessPrivate::initializeProcessManager();
#endif
#endif
#ifdef QT_EVAL
extern void qt_core_eval_init(QCoreApplicationPrivate::Type);
qt_core_eval_init(d->application_type);
#endif
d->processCommandLineArguments();
qt_call_pre_routines();
qt_startup_hook();
#ifndef QT_BOOTSTRAPPED
if (Q_UNLIKELY(qtHookData[QHooks::Startup]))
reinterpret_cast<QHooks::StartupCallback>(qtHookData[QHooks::Startup])();
#endif
#ifndef QT_NO_QOBJECT
QCoreApplicationPrivate::is_app_running = true; // No longer starting up.
#endif
}
/*!
Destroys the QCoreApplication object.
*/
QCoreApplication::~QCoreApplication()
{
qt_call_post_routines();
self = 0;
#ifndef QT_NO_QOBJECT
QCoreApplicationPrivate::is_app_closing = true;
QCoreApplicationPrivate::is_app_running = false;
#endif
#if !defined(QT_NO_THREAD)
// Synchronize and stop the global thread pool threads.
QThreadPool *globalThreadPool = 0;
QT_TRY {
globalThreadPool = QThreadPool::globalInstance();
} QT_CATCH (...) {
// swallow the exception, since destructors shouldn't throw
}
if (globalThreadPool)
globalThreadPool->waitForDone();
#endif
#ifndef QT_NO_QOBJECT
d_func()->threadData->eventDispatcher = 0;
if (QCoreApplicationPrivate::eventDispatcher)
QCoreApplicationPrivate::eventDispatcher->closingDown();
QCoreApplicationPrivate::eventDispatcher = 0;
#endif
#ifndef QT_NO_LIBRARY
delete coreappdata()->app_libpaths;
coreappdata()->app_libpaths = 0;
#endif
}
/*!
\since 5.3
Allows the application to run setuid on UNIX platforms if \a allow
is true.
If \a allow is false (the default) and Qt detects the application is
running with an effective user id different than the real user id,
the application will be aborted when a QCoreApplication instance is
created.
Qt is not an appropriate solution for setuid programs due to its
large attack surface. However some applications may be required
to run in this manner for historical reasons. This flag will
prevent Qt from aborting the application when this is detected,
and must be set before a QCoreApplication instance is created.
\note It is strongly recommended not to enable this option since
it introduces security risks.
*/
void QCoreApplication::setSetuidAllowed(bool allow)
{
QCoreApplicationPrivate::setuidAllowed = allow;
}
/*!
\since 5.3
Returns true if the application is allowed to run setuid on UNIX
platforms.
\sa QCoreApplication::setSetuidAllowed()
*/
bool QCoreApplication::isSetuidAllowed()
{
return QCoreApplicationPrivate::setuidAllowed;
}
/*!
Sets the attribute \a attribute if \a on is true;
otherwise clears the attribute.
\sa testAttribute()
*/
void QCoreApplication::setAttribute(Qt::ApplicationAttribute attribute, bool on)
{
if (on)
QCoreApplicationPrivate::attribs |= 1 << attribute;
else
QCoreApplicationPrivate::attribs &= ~(1 << attribute);
}
/*!
Returns \c true if attribute \a attribute is set;
otherwise returns \c false.
\sa setAttribute()
*/
bool QCoreApplication::testAttribute(Qt::ApplicationAttribute attribute)
{
return QCoreApplicationPrivate::testAttribute(attribute);
}
#ifndef QT_NO_QOBJECT
/*!
\property QCoreApplication::quitLockEnabled
Returns \c true if the use of the QEventLoopLocker feature can cause the
application to quit, otherwise returns \c false.
\sa QEventLoopLocker
*/
/*!
Returns \c true if the use of the QEventLoopLocker feature can cause the
application to quit, otherwise returns \c false.
\sa QEventLoopLocker
*/
bool QCoreApplication::isQuitLockEnabled()
{
return quitLockRefEnabled;
}
/*!
Enables the ability of the QEventLoopLocker feature to quit
the application.
If disabled, the use of QEventLoopLocker will not quit the application.
\sa QEventLoopLocker
*/
void QCoreApplication::setQuitLockEnabled(bool enabled)
{
quitLockRefEnabled = enabled;
}
/*!
\internal
This function is here to make it possible for Qt extensions to
hook into event notification without subclassing QApplication
*/
bool QCoreApplication::notifyInternal(QObject *receiver, QEvent *event)
{
// Make it possible for Qt Script to hook into events even
// though QApplication is subclassed...
bool result = false;
void *cbdata[] = { receiver, event, &result };
if (QInternal::activateCallbacks(QInternal::EventNotifyCallback, cbdata)) {
return result;
}
// Qt enforces the rule that events can only be sent to objects in
// the current thread, so receiver->d_func()->threadData is
// equivalent to QThreadData::current(), just without the function
// call overhead.
QObjectPrivate *d = receiver->d_func();
QThreadData *threadData = d->threadData;
QScopedLoopLevelCounter loopLevelCounter(threadData);
return notify(receiver, event);
}
/*!
Sends \a event to \a receiver: \a {receiver}->event(\a event).
Returns the value that is returned from the receiver's event
handler. Note that this function is called for all events sent to
any object in any thread.
For certain types of events (e.g. mouse and key events),
the event will be propagated to the receiver's parent and so on up to
the top-level object if the receiver is not interested in the event
(i.e., it returns \c false).
There are five different ways that events can be processed;
reimplementing this virtual function is just one of them. All five
approaches are listed below:
\list 1
\li Reimplementing \l {QWidget::}{paintEvent()}, \l {QWidget::}{mousePressEvent()} and so
on. This is the commonest, easiest, and least powerful way.
\li Reimplementing this function. This is very powerful, providing
complete control; but only one subclass can be active at a time.
\li Installing an event filter on QCoreApplication::instance(). Such
an event filter is able to process all events for all widgets, so
it's just as powerful as reimplementing notify(); furthermore, it's
possible to have more than one application-global event filter.
Global event filters even see mouse events for
\l{QWidget::isEnabled()}{disabled widgets}. Note that application
event filters are only called for objects that live in the main
thread.
\li Reimplementing QObject::event() (as QWidget does). If you do
this you get Tab key presses, and you get to see the events before
any widget-specific event filters.
\li Installing an event filter on the object. Such an event filter gets all
the events, including Tab and Shift+Tab key press events, as long as they
do not change the focus widget.
\endlist
\sa QObject::event(), installNativeEventFilter()
*/
bool QCoreApplication::notify(QObject *receiver, QEvent *event)
{
Q_D(QCoreApplication);
// no events are delivered after ~QCoreApplication() has started
if (QCoreApplicationPrivate::is_app_closing)
return true;
if (receiver == 0) { // serious error
qWarning("QCoreApplication::notify: Unexpected null receiver");
return true;
}
#ifndef QT_NO_DEBUG
d->checkReceiverThread(receiver);
#endif
return receiver->isWidgetType() ? false : d->notify_helper(receiver, event);
}
bool QCoreApplicationPrivate::sendThroughApplicationEventFilters(QObject *receiver, QEvent *event)
{
if (receiver->d_func()->threadData == this->threadData && extraData) {
// application event filters are only called for objects in the GUI thread
for (int i = 0; i < extraData->eventFilters.size(); ++i) {
QObject *obj = extraData->eventFilters.at(i);
if (!obj)
continue;
if (obj->d_func()->threadData != threadData) {
qWarning("QCoreApplication: Application event filter cannot be in a different thread.");
continue;
}
if (obj->eventFilter(receiver, event))
return true;
}
}
return false;
}
bool QCoreApplicationPrivate::sendThroughObjectEventFilters(QObject *receiver, QEvent *event)
{
Q_Q(QCoreApplication);
if (receiver != q && receiver->d_func()->extraData) {
for (int i = 0; i < receiver->d_func()->extraData->eventFilters.size(); ++i) {
QObject *obj = receiver->d_func()->extraData->eventFilters.at(i);
if (!obj)
continue;
if (obj->d_func()->threadData != receiver->d_func()->threadData) {
qWarning("QCoreApplication: Object event filter cannot be in a different thread.");
continue;
}
if (obj->eventFilter(receiver, event))
return true;
}
}
return false;
}
/*!
\internal
Helper function called by notify()
*/
bool QCoreApplicationPrivate::notify_helper(QObject *receiver, QEvent * event)
{
// send to all application event filters
if (sendThroughApplicationEventFilters(receiver, event))
return true;
// send to all receiver event filters
if (sendThroughObjectEventFilters(receiver, event))
return true;
// deliver the event
return receiver->event(event);
}
/*!
Returns \c true if an application object has not been created yet;
otherwise returns \c false.
\sa closingDown()
*/
bool QCoreApplication::startingUp()
{
return !QCoreApplicationPrivate::is_app_running;
}
/*!
Returns \c true if the application objects are being destroyed;
otherwise returns \c false.
\sa startingUp()
*/
bool QCoreApplication::closingDown()
{
return QCoreApplicationPrivate::is_app_closing;
}
/*!
Processes all pending events for the calling thread according to
the specified \a flags until there are no more events to process.
You can call this function occasionally when your program is busy
performing a long operation (e.g. copying a file).
In the event that you are running a local loop which calls this function
continuously, without an event loop, the
\l{QEvent::DeferredDelete}{DeferredDelete} events will
not be processed. This can affect the behaviour of widgets,
e.g. QToolTip, that rely on \l{QEvent::DeferredDelete}{DeferredDelete}
events to function properly. An alternative would be to call
\l{QCoreApplication::sendPostedEvents()}{sendPostedEvents()} from
within that local loop.
Calling this function processes events only for the calling thread.
\threadsafe
\sa exec(), QTimer, QEventLoop::processEvents(), flush(), sendPostedEvents()
*/
void QCoreApplication::processEvents(QEventLoop::ProcessEventsFlags flags)
{
QThreadData *data = QThreadData::current();
if (!data->hasEventDispatcher())
return;
data->eventDispatcher.load()->processEvents(flags);
}
/*!
\overload processEvents()
Processes pending events for the calling thread for \a maxtime
milliseconds or until there are no more events to process,
whichever is shorter.
You can call this function occasionally when you program is busy
doing a long operation (e.g. copying a file).
Calling this function processes events only for the calling thread.
\threadsafe
\sa exec(), QTimer, QEventLoop::processEvents()
*/
void QCoreApplication::processEvents(QEventLoop::ProcessEventsFlags flags, int maxtime)
{
QThreadData *data = QThreadData::current();
if (!data->hasEventDispatcher())
return;
QElapsedTimer start;
start.start();
while (data->eventDispatcher.load()->processEvents(flags & ~QEventLoop::WaitForMoreEvents)) {
if (start.elapsed() > maxtime)
break;
}
}
/*****************************************************************************
Main event loop wrappers
*****************************************************************************/
/*!
Enters the main event loop and waits until exit() is called.
Returns the value that was set to exit() (which is 0 if exit() is
called via quit()).
It is necessary to call this function to start event handling. The
main event loop receives events from the window system and
dispatches these to the application widgets.
To make your application perform idle processing (by executing a
special function whenever there are no pending events), use a
QTimer with 0 timeout. More advanced idle processing schemes can
be achieved using processEvents().
We recommend that you connect clean-up code to the
\l{QCoreApplication::}{aboutToQuit()} signal, instead of putting it in
your application's \c{main()} function because on some platforms the
exec() call may not return. For example, on Windows
when the user logs off, the system terminates the process after Qt
closes all top-level windows. Hence, there is no guarantee that the
application will have time to exit its event loop and execute code at
the end of the \c{main()} function after the exec()
call.
\sa quit(), exit(), processEvents(), QApplication::exec()
*/
int QCoreApplication::exec()
{
if (!QCoreApplicationPrivate::checkInstance("exec"))
return -1;
QThreadData *threadData = self->d_func()->threadData;
if (threadData != QThreadData::current()) {
qWarning("%s::exec: Must be called from the main thread", self->metaObject()->className());
return -1;
}
if (!threadData->eventLoops.isEmpty()) {
qWarning("QCoreApplication::exec: The event loop is already running");
return -1;
}
threadData->quitNow = false;
QEventLoop eventLoop;
self->d_func()->in_exec = true;
self->d_func()->aboutToQuitEmitted = false;
int returnCode = eventLoop.exec();
threadData->quitNow = false;
if (self) {
self->d_func()->in_exec = false;
if (!self->d_func()->aboutToQuitEmitted)
emit self->aboutToQuit(QPrivateSignal());
self->d_func()->aboutToQuitEmitted = true;
sendPostedEvents(0, QEvent::DeferredDelete);
}
return returnCode;
}
/*!
Tells the application to exit with a return code.
After this function has been called, the application leaves the
main event loop and returns from the call to exec(). The exec()
function returns \a returnCode. If the event loop is not running,
this function does nothing.
By convention, a \a returnCode of 0 means success, and any non-zero
value indicates an error.
Note that unlike the C library function of the same name, this
function \e does return to the caller -- it is event processing that
stops.
\sa quit(), exec()
*/
void QCoreApplication::exit(int returnCode)
{
if (!self)
return;
QThreadData *data = self->d_func()->threadData;
data->quitNow = true;
for (int i = 0; i < data->eventLoops.size(); ++i) {
QEventLoop *eventLoop = data->eventLoops.at(i);
eventLoop->exit(returnCode);
}
#ifdef Q_OS_WINRT
qWarning("QCoreApplication::exit: It is not recommended to explicitly exit an application on Windows Store Apps");
ComPtr<ICoreApplication> app;
HRESULT hr = RoGetActivationFactory(Wrappers::HString::MakeReference(RuntimeClass_Windows_ApplicationModel_Core_CoreApplication).Get(),
IID_PPV_ARGS(&app));
RETURN_VOID_IF_FAILED("Could not acquire ICoreApplication object");
ComPtr<ICoreApplicationExit> appExit;
hr = app.As(&appExit);
RETURN_VOID_IF_FAILED("Could not acquire ICoreApplicationExit object");
hr = appExit->Exit();
RETURN_VOID_IF_FAILED("Could not exit application");
#endif // Q_OS_WINRT
}
/*****************************************************************************
QCoreApplication management of posted events
*****************************************************************************/
/*!
\fn bool QCoreApplication::sendEvent(QObject *receiver, QEvent *event)
Sends event \a event directly to receiver \a receiver, using the
notify() function. Returns the value that was returned from the
event handler.
The event is \e not deleted when the event has been sent. The normal
approach is to create the event on the stack, for example:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 0
\sa postEvent(), notify()
*/
/*!
\since 4.3
Adds the event \a event, with the object \a receiver as the
receiver of the event, to an event queue and returns immediately.
The event must be allocated on the heap since the post event queue
will take ownership of the event and delete it once it has been
posted. It is \e {not safe} to access the event after
it has been posted.
When control returns to the main event loop, all events that are
stored in the queue will be sent using the notify() function.
Events are sorted in descending \a priority order, i.e. events
with a high \a priority are queued before events with a lower \a
priority. The \a priority can be any integer value, i.e. between
INT_MAX and INT_MIN, inclusive; see Qt::EventPriority for more
details. Events with equal \a priority will be processed in the
order posted.
\threadsafe
\sa sendEvent(), notify(), sendPostedEvents(), Qt::EventPriority
*/
void QCoreApplication::postEvent(QObject *receiver, QEvent *event, int priority)
{
if (receiver == 0) {
qWarning("QCoreApplication::postEvent: Unexpected null receiver");
delete event;
return;
}
QThreadData * volatile * pdata = &receiver->d_func()->threadData;
QThreadData *data = *pdata;
if (!data) {
// posting during destruction? just delete the event to prevent a leak
delete event;
return;
}
// lock the post event mutex
data->postEventList.mutex.lock();
// if object has moved to another thread, follow it
while (data != *pdata) {
data->postEventList.mutex.unlock();
data = *pdata;
if (!data) {
// posting during destruction? just delete the event to prevent a leak
delete event;
return;
}
data->postEventList.mutex.lock();
}
QMutexUnlocker locker(&data->postEventList.mutex);
// if this is one of the compressible events, do compression
if (receiver->d_func()->postedEvents
&& self && self->compressEvent(event, receiver, &data->postEventList)) {
return;
}
if (event->type() == QEvent::DeferredDelete && data == QThreadData::current()) {
// remember the current running eventloop for DeferredDelete
// events posted in the receiver's thread
static_cast<QDeferredDeleteEvent *>(event)->level = data->loopLevel;
}
// delete the event on exceptions to protect against memory leaks till the event is
// properly owned in the postEventList
QScopedPointer<QEvent> eventDeleter(event);
data->postEventList.addEvent(QPostEvent(receiver, event, priority));
eventDeleter.take();
event->posted = true;
++receiver->d_func()->postedEvents;
data->canWait = false;
locker.unlock();
QAbstractEventDispatcher* dispatcher = data->eventDispatcher.loadAcquire();
if (dispatcher)
dispatcher->wakeUp();
}
/*!
\internal
Returns \c true if \a event was compressed away (possibly deleted) and should not be added to the list.
*/
bool QCoreApplication::compressEvent(QEvent *event, QObject *receiver, QPostEventList *postedEvents)
{
#ifdef Q_OS_WIN
Q_ASSERT(event);
Q_ASSERT(receiver);
Q_ASSERT(postedEvents);
// compress posted timers to this object.
if (event->type() == QEvent::Timer && receiver->d_func()->postedEvents > 0) {
int timerId = ((QTimerEvent *) event)->timerId();
for (int i=0; i<postedEvents->size(); ++i) {
const QPostEvent &e = postedEvents->at(i);
if (e.receiver == receiver && e.event && e.event->type() == QEvent::Timer
&& ((QTimerEvent *) e.event)->timerId() == timerId) {
delete event;
return true;
}
}
} else
#endif
if ((event->type() == QEvent::DeferredDelete
|| event->type() == QEvent::Quit)
&& receiver->d_func()->postedEvents > 0) {
for (int i = 0; i < postedEvents->size(); ++i) {
const QPostEvent &cur = postedEvents->at(i);
if (cur.receiver != receiver
|| cur.event == 0
|| cur.event->type() != event->type())
continue;
// found an event for this receiver
delete event;
return true;
}
}
return false;
}
/*!
Immediately dispatches all events which have been previously queued
with QCoreApplication::postEvent() and which are for the object \a receiver
and have the event type \a event_type.
Events from the window system are \e not dispatched by this
function, but by processEvents().
If \a receiver is null, the events of \a event_type are sent for all
objects. If \a event_type is 0, all the events are sent for \a receiver.
\note This method must be called from the same thread as its QObject parameter, \a receiver.
\sa flush(), postEvent()
*/
void QCoreApplication::sendPostedEvents(QObject *receiver, int event_type)
{
QThreadData *data = QThreadData::current();
QCoreApplicationPrivate::sendPostedEvents(receiver, event_type, data);
}
void QCoreApplicationPrivate::sendPostedEvents(QObject *receiver, int event_type,
QThreadData *data)
{
if (event_type == -1) {
// we were called by an obsolete event dispatcher.
event_type = 0;
}
if (receiver && receiver->d_func()->threadData != data) {
qWarning("QCoreApplication::sendPostedEvents: Cannot send "
"posted events for objects in another thread");
return;
}
++data->postEventList.recursion;
QMutexLocker locker(&data->postEventList.mutex);
// by default, we assume that the event dispatcher can go to sleep after
// processing all events. if any new events are posted while we send
// events, canWait will be set to false.
data->canWait = (data->postEventList.size() == 0);
if (data->postEventList.size() == 0 || (receiver && !receiver->d_func()->postedEvents)) {
--data->postEventList.recursion;
return;
}
data->canWait = true;
// okay. here is the tricky loop. be careful about optimizing
// this, it looks the way it does for good reasons.
int startOffset = data->postEventList.startOffset;
int &i = (!event_type && !receiver) ? data->postEventList.startOffset : startOffset;
data->postEventList.insertionOffset = data->postEventList.size();
// Exception-safe cleaning up without the need for a try/catch block
struct CleanUp {
QObject *receiver;
int event_type;
QThreadData *data;
bool exceptionCaught;
inline CleanUp(QObject *receiver, int event_type, QThreadData *data) :
receiver(receiver), event_type(event_type), data(data), exceptionCaught(true)
{}
inline ~CleanUp()
{
if (exceptionCaught) {
// since we were interrupted, we need another pass to make sure we clean everything up
data->canWait = false;
}
--data->postEventList.recursion;
if (!data->postEventList.recursion && !data->canWait && data->hasEventDispatcher())
data->eventDispatcher.load()->wakeUp();
// clear the global list, i.e. remove everything that was
// delivered.
if (!event_type && !receiver && data->postEventList.startOffset >= 0) {
const QPostEventList::iterator it = data->postEventList.begin();
data->postEventList.erase(it, it + data->postEventList.startOffset);
data->postEventList.insertionOffset -= data->postEventList.startOffset;
Q_ASSERT(data->postEventList.insertionOffset >= 0);
data->postEventList.startOffset = 0;
}
}
};
CleanUp cleanup(receiver, event_type, data);
while (i < data->postEventList.size()) {
// avoid live-lock
if (i >= data->postEventList.insertionOffset)
break;
const QPostEvent &pe = data->postEventList.at(i);
++i;
if (!pe.event)
continue;
if ((receiver && receiver != pe.receiver) || (event_type && event_type != pe.event->type())) {
data->canWait = false;
continue;
}
if (pe.event->type() == QEvent::DeferredDelete) {
// DeferredDelete events are only sent when we are explicitly asked to
// (s.a. QEvent::DeferredDelete), and then only if the event loop that
// posted the event has returned.
int loopLevel = static_cast<QDeferredDeleteEvent *>(pe.event)->loopLevel();
const bool allowDeferredDelete =
(loopLevel > data->loopLevel
|| (!loopLevel && data->loopLevel > 0)
|| (event_type == QEvent::DeferredDelete
&& loopLevel == data->loopLevel));
if (!allowDeferredDelete) {
// cannot send deferred delete
if (!event_type && !receiver) {
// we must copy it first; we want to re-post the event
// with the event pointer intact, but we can't delay
// nulling the event ptr until after re-posting, as
// addEvent may invalidate pe.
QPostEvent pe_copy = pe;
// null out the event so if sendPostedEvents recurses, it
// will ignore this one, as it's been re-posted.
const_cast<QPostEvent &>(pe).event = 0;
// re-post the copied event so it isn't lost
data->postEventList.addEvent(pe_copy);
}
continue;
}
}
// first, we diddle the event so that we can deliver
// it, and that no one will try to touch it later.
pe.event->posted = false;
QEvent *e = pe.event;
QObject * r = pe.receiver;
--r->d_func()->postedEvents;
Q_ASSERT(r->d_func()->postedEvents >= 0);
// next, update the data structure so that we're ready
// for the next event.
const_cast<QPostEvent &>(pe).event = 0;
struct MutexUnlocker
{
QMutexLocker &m;
MutexUnlocker(QMutexLocker &m) : m(m) { m.unlock(); }
~MutexUnlocker() { m.relock(); }
};
MutexUnlocker unlocker(locker);
QScopedPointer<QEvent> event_deleter(e); // will delete the event (with the mutex unlocked)
// after all that work, it's time to deliver the event.
QCoreApplication::sendEvent(r, e);
// careful when adding anything below this point - the
// sendEvent() call might invalidate any invariants this
// function depends on.
}
cleanup.exceptionCaught = false;
}
/*!
\since 4.3
Removes all events of the given \a eventType that were posted
using postEvent() for \a receiver.
The events are \e not dispatched, instead they are removed from
the queue. You should never need to call this function. If you do
call it, be aware that killing events may cause \a receiver to
break one or more invariants.
If \a receiver is null, the events of \a eventType are removed for
all objects. If \a eventType is 0, all the events are removed for
\a receiver. You should never call this function with \a eventType
of 0. If you do call it in this way, be aware that killing events
may cause \a receiver to break one or more invariants.
\threadsafe
*/
void QCoreApplication::removePostedEvents(QObject *receiver, int eventType)
{
QThreadData *data = receiver ? receiver->d_func()->threadData : QThreadData::current();
QMutexLocker locker(&data->postEventList.mutex);
// the QObject destructor calls this function directly. this can
// happen while the event loop is in the middle of posting events,
// and when we get here, we may not have any more posted events
// for this object.
if (receiver && !receiver->d_func()->postedEvents)
return;
//we will collect all the posted events for the QObject
//and we'll delete after the mutex was unlocked
QVarLengthArray<QEvent*> events;
int n = data->postEventList.size();
int j = 0;
for (int i = 0; i < n; ++i) {
const QPostEvent &pe = data->postEventList.at(i);
if ((!receiver || pe.receiver == receiver)
&& (pe.event && (eventType == 0 || pe.event->type() == eventType))) {
--pe.receiver->d_func()->postedEvents;
pe.event->posted = false;
events.append(pe.event);
const_cast<QPostEvent &>(pe).event = 0;
} else if (!data->postEventList.recursion) {
if (i != j)
qSwap(data->postEventList[i], data->postEventList[j]);
++j;
}
}
#ifdef QT_DEBUG
if (receiver && eventType == 0) {
Q_ASSERT(!receiver->d_func()->postedEvents);
}
#endif
if (!data->postEventList.recursion) {
// truncate list
data->postEventList.erase(data->postEventList.begin() + j, data->postEventList.end());
}
locker.unlock();
for (int i = 0; i < events.count(); ++i) {
delete events[i];
}
}
/*!
Removes \a event from the queue of posted events, and emits a
warning message if appropriate.
\warning This function can be \e really slow. Avoid using it, if
possible.
\threadsafe
*/
void QCoreApplicationPrivate::removePostedEvent(QEvent * event)
{
if (!event || !event->posted)
return;
QThreadData *data = QThreadData::current();
QMutexLocker locker(&data->postEventList.mutex);
if (data->postEventList.size() == 0) {
#if defined(QT_DEBUG)
qDebug("QCoreApplication::removePostedEvent: Internal error: %p %d is posted",
(void*)event, event->type());
return;
#endif
}
for (int i = 0; i < data->postEventList.size(); ++i) {
const QPostEvent & pe = data->postEventList.at(i);
if (pe.event == event) {
#ifndef QT_NO_DEBUG
qWarning("QCoreApplication::removePostedEvent: Event of type %d deleted while posted to %s %s",
event->type(),
pe.receiver->metaObject()->className(),
pe.receiver->objectName().toLocal8Bit().data());
#endif
--pe.receiver->d_func()->postedEvents;
pe.event->posted = false;
delete pe.event;
const_cast<QPostEvent &>(pe).event = 0;
return;
}
}
}
/*!\reimp
*/
bool QCoreApplication::event(QEvent *e)
{
if (e->type() == QEvent::Quit) {
quit();
return true;
}
return QObject::event(e);
}
/*! \enum QCoreApplication::Encoding
\obsolete
This enum type used to define the 8-bit encoding of character string
arguments to translate(). This enum is now obsolete and UTF-8 will be
used in all cases.
\value UnicodeUTF8 UTF-8.
\omitvalue Latin1
\omitvalue DefaultCodec UTF-8.
\omitvalue CodecForTr
\sa QObject::tr(), QString::fromUtf8()
*/
void QCoreApplicationPrivate::ref()
{
quitLockRef.ref();
}
void QCoreApplicationPrivate::deref()
{
if (!quitLockRef.deref())
maybeQuit();
}
void QCoreApplicationPrivate::maybeQuit()
{
if (quitLockRef.load() == 0 && in_exec && quitLockRefEnabled && shouldQuit())
QCoreApplication::postEvent(QCoreApplication::instance(), new QEvent(QEvent::Quit));
}
/*!
Tells the application to exit with return code 0 (success).
Equivalent to calling QCoreApplication::exit(0).
It's common to connect the QApplication::lastWindowClosed() signal
to quit(), and you also often connect e.g. QAbstractButton::clicked() or
signals in QAction, QMenu, or QMenuBar to it.
Example:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 1
\sa exit(), aboutToQuit(), QApplication::lastWindowClosed()
*/
void QCoreApplication::quit()
{
exit(0);
}
/*!
\fn void QCoreApplication::aboutToQuit()
This signal is emitted when the application is about to quit the
main event loop, e.g. when the event loop level drops to zero.
This may happen either after a call to quit() from inside the
application or when the users shuts down the entire desktop session.
The signal is particularly useful if your application has to do some
last-second cleanup. Note that no user interaction is possible in
this state.
\sa quit()
*/
#endif // QT_NO_QOBJECT
#ifndef QT_NO_TRANSLATION
/*!
Adds the translation file \a translationFile to the list of
translation files to be used for translations.
Multiple translation files can be installed. Translations are
searched for in the reverse order in which they were installed,
so the most recently installed translation file is searched first
and the first translation file installed is searched last.
The search stops as soon as a translation containing a matching
string is found.
Installing or removing a QTranslator, or changing an installed QTranslator
generates a \l{QEvent::LanguageChange}{LanguageChange} event for the
QCoreApplication instance. A QApplication instance will propagate the event
to all toplevel windows, where a reimplementation of changeEvent can
re-translate the user interface by passing user-visible strings via the
tr() function to the respective property setters. User-interface classes
generated by Qt Designer provide a \c retranslateUi() function that can be
called.
The function returns \c true on success and false on failure.
\sa removeTranslator(), translate(), QTranslator::load(), {Dynamic Translation}
*/
bool QCoreApplication::installTranslator(QTranslator *translationFile)
{
if (!translationFile)
return false;
if (!QCoreApplicationPrivate::checkInstance("installTranslator"))
return false;
QCoreApplicationPrivate *d = self->d_func();
d->translators.prepend(translationFile);
#ifndef QT_NO_TRANSLATION_BUILDER
if (translationFile->isEmpty())
return false;
#endif
#ifndef QT_NO_QOBJECT
QEvent ev(QEvent::LanguageChange);
QCoreApplication::sendEvent(self, &ev);
#endif
return true;
}
/*!
Removes the translation file \a translationFile from the list of
translation files used by this application. (It does not delete the
translation file from the file system.)
The function returns \c true on success and false on failure.
\sa installTranslator(), translate(), QObject::tr()
*/
bool QCoreApplication::removeTranslator(QTranslator *translationFile)
{
if (!translationFile)
return false;
if (!QCoreApplicationPrivate::checkInstance("removeTranslator"))
return false;
QCoreApplicationPrivate *d = self->d_func();
if (d->translators.removeAll(translationFile)) {
#ifndef QT_NO_QOBJECT
if (!self->closingDown()) {
QEvent ev(QEvent::LanguageChange);
QCoreApplication::sendEvent(self, &ev);
}
#endif
return true;
}
return false;
}
static void replacePercentN(QString *result, int n)
{
if (n >= 0) {
int percentPos = 0;
int len = 0;
while ((percentPos = result->indexOf(QLatin1Char('%'), percentPos + len)) != -1) {
len = 1;
QString fmt;
if (result->at(percentPos + len) == QLatin1Char('L')) {
++len;
fmt = QLatin1String("%L1");
} else {
fmt = QLatin1String("%1");
}
if (result->at(percentPos + len) == QLatin1Char('n')) {
fmt = fmt.arg(n);
++len;
result->replace(percentPos, len, fmt);
len = fmt.length();
}
}
}
}
/*!
\reentrant
Returns the translation text for \a sourceText, by querying the
installed translation files. The translation files are searched
from the most recently installed file back to the first
installed file.
QObject::tr() provides this functionality more conveniently.
\a context is typically a class name (e.g., "MyDialog") and \a
sourceText is either English text or a short identifying text.
\a disambiguation is an identifying string, for when the same \a
sourceText is used in different roles within the same context. By
default, it is null.
See the \l QTranslator and \l QObject::tr() documentation for
more information about contexts, disambiguations and comments.
\a n is used in conjunction with \c %n to support plural forms.
See QObject::tr() for details.
If none of the translation files contain a translation for \a
sourceText in \a context, this function returns a QString
equivalent of \a sourceText.
This function is not virtual. You can use alternative translation
techniques by subclassing \l QTranslator.
\warning This method is reentrant only if all translators are
installed \e before calling this method. Installing or removing
translators while performing translations is not supported. Doing
so will most likely result in crashes or other undesirable
behavior.
\sa QObject::tr(), installTranslator()
*/
QString QCoreApplication::translate(const char *context, const char *sourceText,
const char *disambiguation, int n)
{
QString result;
if (!sourceText)
return result;
if (self && !self->d_func()->translators.isEmpty()) {
QList<QTranslator*>::ConstIterator it;
QTranslator *translationFile;
for (it = self->d_func()->translators.constBegin(); it != self->d_func()->translators.constEnd(); ++it) {
translationFile = *it;
result = translationFile->translate(context, sourceText, disambiguation, n);
if (!result.isNull())
break;
}
}
if (result.isNull())
result = QString::fromUtf8(sourceText);
replacePercentN(&result, n);
return result;
}
/*! \fn static QString QCoreApplication::translate(const char *context, const char *key, const char *disambiguation, Encoding encoding, int n = -1)
\obsolete
*/
// Declared in qglobal.h
QString qtTrId(const char *id, int n)
{
return QCoreApplication::translate(0, id, 0, n);
}
bool QCoreApplicationPrivate::isTranslatorInstalled(QTranslator *translator)
{
return QCoreApplication::self
&& QCoreApplication::self->d_func()->translators.contains(translator);
}
#else
QString QCoreApplication::translate(const char *context, const char *sourceText,
const char *disambiguation, int n)
{
Q_UNUSED(context)
Q_UNUSED(disambiguation)
QString ret = QString::fromUtf8(sourceText);
if (n >= 0)
ret.replace(QLatin1String("%n"), QString::number(n));
return ret;
}
#endif //QT_NO_TRANSLATE
// Makes it possible to point QCoreApplication to a custom location to ensure
// the directory is added to the patch, and qt.conf and deployed plugins are
// found from there. This is for use cases in which QGuiApplication is
// instantiated by a library and not by an application executable, for example,
// Active X servers.
void QCoreApplicationPrivate::setApplicationFilePath(const QString &path)
{
if (QCoreApplicationPrivate::cachedApplicationFilePath)
*QCoreApplicationPrivate::cachedApplicationFilePath = path;
else
QCoreApplicationPrivate::cachedApplicationFilePath = new QString(path);
}
/*!
Returns the directory that contains the application executable.
For example, if you have installed Qt in the \c{C:\Qt}
directory, and you run the \c{regexp} example, this function will
return "C:/Qt/examples/tools/regexp".
On OS X and iOS this will point to the directory actually containing the
executable, which may be inside of an application bundle (if the
application is bundled).
\warning On Linux, this function will try to get the path from the
\c {/proc} file system. If that fails, it assumes that \c
{argv[0]} contains the absolute file name of the executable. The
function also assumes that the current directory has not been
changed by the application.
\sa applicationFilePath()
*/
QString QCoreApplication::applicationDirPath()
{
if (!self) {
qWarning("QCoreApplication::applicationDirPath: Please instantiate the QApplication object first");
return QString();
}
QCoreApplicationPrivate *d = self->d_func();
if (d->cachedApplicationDirPath.isNull())
d->cachedApplicationDirPath = QFileInfo(applicationFilePath()).path();
return d->cachedApplicationDirPath;
}
/*!
Returns the file path of the application executable.
For example, if you have installed Qt in the \c{/usr/local/qt}
directory, and you run the \c{regexp} example, this function will
return "/usr/local/qt/examples/tools/regexp/regexp".
\warning On Linux, this function will try to get the path from the
\c {/proc} file system. If that fails, it assumes that \c
{argv[0]} contains the absolute file name of the executable. The
function also assumes that the current directory has not been
changed by the application.
\sa applicationDirPath()
*/
QString QCoreApplication::applicationFilePath()
{
if (!self) {
qWarning("QCoreApplication::applicationFilePath: Please instantiate the QApplication object first");
return QString();
}
QCoreApplicationPrivate *d = self->d_func();
static char *procName = d->argv[0];
if (qstrcmp(procName, d->argv[0]) != 0) {
// clear the cache if the procname changes, so we reprocess it.
QCoreApplicationPrivate::clearApplicationFilePath();
procName = d->argv[0];
}
if (QCoreApplicationPrivate::cachedApplicationFilePath)
return *QCoreApplicationPrivate::cachedApplicationFilePath;
#if defined(Q_OS_WIN)
QCoreApplicationPrivate::setApplicationFilePath(QFileInfo(qAppFileName()).filePath());
return *QCoreApplicationPrivate::cachedApplicationFilePath;
#elif defined(Q_OS_BLACKBERRY)
if (!arguments().isEmpty()) { // args is never empty, but the navigator can change behaviour some day
QFileInfo fileInfo(arguments().at(0));
const bool zygotized = fileInfo.exists();
if (zygotized) {
// Handle the zygotized case:
QCoreApplicationPrivate::setApplicationFilePath(QDir::cleanPath(fileInfo.absoluteFilePath()));
return *QCoreApplicationPrivate::cachedApplicationFilePath;
}
}
// Handle the non-zygotized case:
const size_t maximum_path = static_cast<size_t>(pathconf("/",_PC_PATH_MAX));
char buff[maximum_path+1];
if (_cmdname(buff)) {
QCoreApplicationPrivate::setApplicationFilePath(QDir::cleanPath(QString::fromLocal8Bit(buff)));
} else {
qWarning("QCoreApplication::applicationFilePath: _cmdname() failed");
// _cmdname() won't fail, but just in case, fallback to the old method
QDir dir(QStringLiteral("./app/native/"));
QStringList executables = dir.entryList(QDir::Executable | QDir::Files);
if (!executables.empty()) {
//We assume that there is only one executable in the folder
QCoreApplicationPrivate::setApplicationFilePath(dir.absoluteFilePath(executables.first()));
}
}
return *QCoreApplicationPrivate::cachedApplicationFilePath;
#elif defined(Q_OS_MAC)
QString qAppFileName_str = qAppFileName();
if(!qAppFileName_str.isEmpty()) {
QFileInfo fi(qAppFileName_str);
if (fi.exists()) {
QCoreApplicationPrivate::setApplicationFilePath(fi.canonicalFilePath());
return *QCoreApplicationPrivate::cachedApplicationFilePath;
}
return QString();
}
#endif
#if defined( Q_OS_UNIX )
# if defined(Q_OS_LINUX) && (!defined(Q_OS_ANDROID) || defined(Q_OS_ANDROID_NO_SDK))
// Try looking for a /proc/<pid>/exe symlink first which points to
// the absolute path of the executable
QFileInfo pfi(QString::fromLatin1("/proc/%1/exe").arg(getpid()));
if (pfi.exists() && pfi.isSymLink()) {
QCoreApplicationPrivate::setApplicationFilePath(pfi.canonicalFilePath());
return *QCoreApplicationPrivate::cachedApplicationFilePath;
}
# endif
if (!arguments().isEmpty()) {
QString argv0 = QFile::decodeName(arguments().at(0).toLocal8Bit());
QString absPath;
if (!argv0.isEmpty() && argv0.at(0) == QLatin1Char('/')) {
/*
If argv0 starts with a slash, it is already an absolute
file path.
*/
absPath = argv0;
} else if (argv0.contains(QLatin1Char('/'))) {
/*
If argv0 contains one or more slashes, it is a file path
relative to the current directory.
*/
absPath = QDir::current().absoluteFilePath(argv0);
} else {
/*
Otherwise, the file path has to be determined using the
PATH environment variable.
*/
absPath = QStandardPaths::findExecutable(argv0);
}
absPath = QDir::cleanPath(absPath);
QFileInfo fi(absPath);
if (fi.exists()) {
QCoreApplicationPrivate::setApplicationFilePath(fi.canonicalFilePath());
return *QCoreApplicationPrivate::cachedApplicationFilePath;
}
}
return QString();
#endif
Q_UNREACHABLE();
}
/*!
\since 4.4
Returns the current process ID for the application.
*/
qint64 QCoreApplication::applicationPid()
{
#if defined(Q_OS_WIN)
return GetCurrentProcessId();
#elif defined(Q_OS_VXWORKS)
return (pid_t) taskIdCurrent;
#else
return getpid();
#endif
}
/*!
\since 4.1
Returns the list of command-line arguments.
Usually arguments().at(0) is the program name, arguments().at(1)
is the first argument, and arguments().last() is the last
argument. See the note below about Windows.
Calling this function is slow - you should store the result in a variable
when parsing the command line.
\warning On Unix, this list is built from the argc and argv parameters passed
to the constructor in the main() function. The string-data in argv is
interpreted using QString::fromLocal8Bit(); hence it is not possible to
pass, for example, Japanese command line arguments on a system that runs in a
Latin1 locale. Most modern Unix systems do not have this limitation, as they are
Unicode-based.
On NT-based Windows, this limitation does not apply either.
On Windows, the arguments() are not built from the contents of argv/argc, as
the content does not support Unicode. Instead, the arguments() are constructed
from the return value of
\l{http://msdn2.microsoft.com/en-us/library/ms683156(VS.85).aspx}{GetCommandLine()}.
As a result of this, the string given by arguments().at(0) might not be
the program name on Windows, depending on how the application was started.
\sa applicationFilePath(), QCommandLineParser
*/
QStringList QCoreApplication::arguments()
{
QStringList list;
if (!self) {
qWarning("QCoreApplication::arguments: Please instantiate the QApplication object first");
return list;
}
const int ac = self->d_func()->argc;
char ** const av = self->d_func()->argv;
list.reserve(ac);
#if defined(Q_OS_WIN) && !defined(Q_OS_WINRT)
// On Windows, it is possible to pass Unicode arguments on
// the command line. To restore those, we split the command line
// and filter out arguments that were deleted by derived application
// classes by index.
QString cmdline = QString::fromWCharArray(GetCommandLine());
#if defined(Q_OS_WINCE)
wchar_t tempFilename[MAX_PATH+1];
if (GetModuleFileName(0, tempFilename, MAX_PATH)) {
tempFilename[MAX_PATH] = 0;
cmdline.prepend(QLatin1Char('\"') + QString::fromWCharArray(tempFilename) + QLatin1String("\" "));
}
#endif // Q_OS_WINCE
char ** const origArgv = self->d_func()->origArgv;
const int origArgc = self->d_func()->origArgc;
char ** const avEnd = av + ac;
const QStringList allArguments = qWinCmdArgs(cmdline);
Q_ASSERT(allArguments.size() == origArgc);
for (int i = 0; i < origArgc; ++i)
if (std::find(av, avEnd, origArgv[i]) != avEnd)
list.push_back(allArguments.at(i));
#else
for (int a = 0; a < ac; ++a) {
list << QString::fromLocal8Bit(av[a]);
}
#endif
return list;
}
/*!
\property QCoreApplication::organizationName
\brief the name of the organization that wrote this application
The value is used by the QSettings class when it is constructed
using the empty constructor. This saves having to repeat this
information each time a QSettings object is created.
On Mac, QSettings uses \l {QCoreApplication::}{organizationDomain()} as the organization
if it's not an empty string; otherwise it uses
organizationName(). On all other platforms, QSettings uses
organizationName() as the organization.
On BlackBerry this property is read-only. It is obtained from the
BAR application descriptor file.
\sa organizationDomain, applicationName
*/
/*!
\fn void QCoreApplication::organizationNameChanged()
\internal
While not useful from C++ due to how organizationName is normally set once on
startup, this is still needed for QML so that bindings are reevaluated after
that initial change.
*/
void QCoreApplication::setOrganizationName(const QString &orgName)
{
if (coreappdata()->orgName == orgName)
return;
coreappdata()->orgName = orgName;
#ifndef QT_NO_QOBJECT
if (QCoreApplication::self)
emit QCoreApplication::self->organizationNameChanged();
#endif
}
QString QCoreApplication::organizationName()
{
#ifdef Q_OS_BLACKBERRY
coreappdata()->loadManifest();
#endif
return coreappdata()->orgName;
}
/*!
\property QCoreApplication::organizationDomain
\brief the Internet domain of the organization that wrote this application
The value is used by the QSettings class when it is constructed
using the empty constructor. This saves having to repeat this
information each time a QSettings object is created.
On Mac, QSettings uses organizationDomain() as the organization
if it's not an empty string; otherwise it uses organizationName().
On all other platforms, QSettings uses organizationName() as the
organization.
\sa organizationName, applicationName, applicationVersion
*/
/*!
\fn void QCoreApplication::organizationDomainChanged()
\internal
Primarily for QML, see organizationNameChanged.
*/
void QCoreApplication::setOrganizationDomain(const QString &orgDomain)
{
if (coreappdata()->orgDomain == orgDomain)
return;
coreappdata()->orgDomain = orgDomain;
#ifndef QT_NO_QOBJECT
if (QCoreApplication::self)
emit QCoreApplication::self->organizationDomainChanged();
#endif
}
QString QCoreApplication::organizationDomain()
{
return coreappdata()->orgDomain;
}
/*!
\property QCoreApplication::applicationName
\brief the name of this application
The value is used by the QSettings class when it is constructed
using the empty constructor. This saves having to repeat this
information each time a QSettings object is created.
If not set, the application name defaults to the executable name (since 5.0).
On BlackBerry this property is read-only. It is obtained from the
BAR application descriptor file.
\sa organizationName, organizationDomain, applicationVersion, applicationFilePath()
*/
/*!
\fn void QCoreApplication::applicationNameChanged()
\internal
Primarily for QML, see organizationNameChanged.
*/
void QCoreApplication::setApplicationName(const QString &application)
{
if (coreappdata()->application == application)
return;
coreappdata()->application = application;
#ifndef QT_NO_QOBJECT
if (QCoreApplication::self)
emit QCoreApplication::self->applicationNameChanged();
#endif
}
QString QCoreApplication::applicationName()
{
#ifdef Q_OS_BLACKBERRY
coreappdata()->loadManifest();
#endif
QString appname = coreappdata() ? coreappdata()->application : QString();
if (appname.isEmpty() && QCoreApplication::self)
appname = QCoreApplication::self->d_func()->appName();
return appname;
}
// Exported for QDesktopServices (Qt4 behavior compatibility)
Q_CORE_EXPORT QString qt_applicationName_noFallback()
{
return coreappdata()->application;
}
/*!
\property QCoreApplication::applicationVersion
\since 4.4
\brief the version of this application
On BlackBerry this property is read-only. It is obtained from the
BAR application descriptor file.
\sa applicationName, organizationName, organizationDomain
*/
/*!
\fn void QCoreApplication::applicationVersionChanged()
\internal
Primarily for QML, see organizationNameChanged.
*/
void QCoreApplication::setApplicationVersion(const QString &version)
{
if (coreappdata()->applicationVersion == version)
return;
coreappdata()->applicationVersion = version;
#ifndef QT_NO_QOBJECT
if (QCoreApplication::self)
emit QCoreApplication::self->applicationVersionChanged();
#endif
}
QString QCoreApplication::applicationVersion()
{
#ifdef Q_OS_BLACKBERRY
coreappdata()->loadManifest();
#endif
return coreappdata()->applicationVersion;
}
#ifndef QT_NO_LIBRARY
Q_GLOBAL_STATIC_WITH_ARGS(QMutex, libraryPathMutex, (QMutex::Recursive))
/*!
Returns a list of paths that the application will search when
dynamically loading libraries.
Qt provides default library paths, but they can also be set using
a \l{Using qt.conf}{qt.conf} file. Paths specified in this file
will override default values.
This list will include the installation directory for plugins if
it exists (the default installation directory for plugins is \c
INSTALL/plugins, where \c INSTALL is the directory where Qt was
installed). The directory of the application executable (NOT the
working directory) is always added, as well as the colon separated
entries of the \c QT_PLUGIN_PATH environment variable.
If you want to iterate over the list, you can use the \l foreach
pseudo-keyword:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 2
\sa setLibraryPaths(), addLibraryPath(), removeLibraryPath(), QLibrary,
{How to Create Qt Plugins}
*/
QStringList QCoreApplication::libraryPaths()
{
QMutexLocker locker(libraryPathMutex());
if (!coreappdata()->app_libpaths) {
QStringList *app_libpaths = coreappdata()->app_libpaths = new QStringList;
QString installPathPlugins = QLibraryInfo::location(QLibraryInfo::PluginsPath);
if (QFile::exists(installPathPlugins)) {
// Make sure we convert from backslashes to slashes.
installPathPlugins = QDir(installPathPlugins).canonicalPath();
if (!app_libpaths->contains(installPathPlugins))
app_libpaths->append(installPathPlugins);
}
// If QCoreApplication is not yet instantiated,
// make sure we add the application path when we construct the QCoreApplication
if (self) self->d_func()->appendApplicationPathToLibraryPaths();
const QByteArray libPathEnv = qgetenv("QT_PLUGIN_PATH");
if (!libPathEnv.isEmpty()) {
#if defined(Q_OS_WIN)
QLatin1Char pathSep(';');
#else
QLatin1Char pathSep(':');
#endif
QStringList paths = QFile::decodeName(libPathEnv).split(pathSep, QString::SkipEmptyParts);
for (QStringList::const_iterator it = paths.constBegin(); it != paths.constEnd(); ++it) {
QString canonicalPath = QDir(*it).canonicalPath();
if (!canonicalPath.isEmpty()
&& !app_libpaths->contains(canonicalPath)) {
app_libpaths->append(canonicalPath);
}
}
}
}
return *(coreappdata()->app_libpaths);
}
/*!
Sets the list of directories to search when loading libraries to
\a paths. All existing paths will be deleted and the path list
will consist of the paths given in \a paths.
\sa libraryPaths(), addLibraryPath(), removeLibraryPath(), QLibrary
*/
void QCoreApplication::setLibraryPaths(const QStringList &paths)
{
QMutexLocker locker(libraryPathMutex());
if (!coreappdata()->app_libpaths)
coreappdata()->app_libpaths = new QStringList;
*(coreappdata()->app_libpaths) = paths;
locker.unlock();
QFactoryLoader::refreshAll();
}
/*!
Prepends \a path to the beginning of the library path list, ensuring that
it is searched for libraries first. If \a path is empty or already in the
path list, the path list is not changed.
The default path list consists of a single entry, the installation
directory for plugins. The default installation directory for plugins
is \c INSTALL/plugins, where \c INSTALL is the directory where Qt was
installed.
\sa removeLibraryPath(), libraryPaths(), setLibraryPaths()
*/
void QCoreApplication::addLibraryPath(const QString &path)
{
if (path.isEmpty())
return;
QMutexLocker locker(libraryPathMutex());
// make sure that library paths is initialized
libraryPaths();
QString canonicalPath = QDir(path).canonicalPath();
if (!canonicalPath.isEmpty()
&& !coreappdata()->app_libpaths->contains(canonicalPath)) {
coreappdata()->app_libpaths->prepend(canonicalPath);
locker.unlock();
QFactoryLoader::refreshAll();
}
}
/*!
Removes \a path from the library path list. If \a path is empty or not
in the path list, the list is not changed.
\sa addLibraryPath(), libraryPaths(), setLibraryPaths()
*/
void QCoreApplication::removeLibraryPath(const QString &path)
{
if (path.isEmpty())
return;
QMutexLocker locker(libraryPathMutex());
// make sure that library paths is initialized
libraryPaths();
QString canonicalPath = QDir(path).canonicalPath();
coreappdata()->app_libpaths->removeAll(canonicalPath);
QFactoryLoader::refreshAll();
}
#endif //QT_NO_LIBRARY
#ifndef QT_NO_QOBJECT
/*!
Installs an event filter \a filterObj for all native events
received by the application in the main thread.
The event filter \a filterObj receives events via its \l {QAbstractNativeEventFilter::}{nativeEventFilter()}
function, which is called for all native events received in the main thread.
The QAbstractNativeEventFilter::nativeEventFilter() function should return true if the event should
be filtered, (i.e. stopped). It should return false to allow
normal Qt processing to continue: the native event can then be translated
into a QEvent and handled by the standard Qt \l{QEvent} {event} filtering,
e.g. QObject::installEventFilter().
If multiple event filters are installed, the filter that was
installed last is activated first.
\note The filter function set here receives native messages,
i.e. MSG or XCB event structs.
\note Native event filters will be disabled when the application the
Qt::AA_MacPluginApplication attribute is set.
For maximum portability, you should always try to use QEvent
and QObject::installEventFilter() whenever possible.
\sa QObject::installEventFilter()
\since 5.0
*/
void QCoreApplication::installNativeEventFilter(QAbstractNativeEventFilter *filterObj)
{
if (QCoreApplication::testAttribute(Qt::AA_MacPluginApplication)) {
qWarning("Native event filters are not applied when the Qt::AA_MacPluginApplication attribute is set");
return;
}
QAbstractEventDispatcher *eventDispatcher = QAbstractEventDispatcher::instance(QCoreApplicationPrivate::theMainThread);
if (!filterObj || !eventDispatcher)
return;
eventDispatcher->installNativeEventFilter(filterObj);
}
/*!
Removes an event \a filterObject from this object. The
request is ignored if such an event filter has not been installed.
All event filters for this object are automatically removed when
this object is destroyed.
It is always safe to remove an event filter, even during event
filter activation (i.e. from the nativeEventFilter() function).
\sa installNativeEventFilter()
\since 5.0
*/
void QCoreApplication::removeNativeEventFilter(QAbstractNativeEventFilter *filterObject)
{
QAbstractEventDispatcher *eventDispatcher = QAbstractEventDispatcher::instance();
if (!filterObject || !eventDispatcher)
return;
eventDispatcher->removeNativeEventFilter(filterObject);
}
/*!
\deprecated
This function returns \c true if there are pending events; otherwise
returns \c false. Pending events can be either from the window
system or posted events using postEvent().
\note this function is not thread-safe. It may only be called in the main
thread and only if there are no other threads running in the application
(including threads Qt starts for its own purposes).
\sa QAbstractEventDispatcher::hasPendingEvents()
*/
#if QT_DEPRECATED_SINCE(5, 3)
bool QCoreApplication::hasPendingEvents()
{
QAbstractEventDispatcher *eventDispatcher = QAbstractEventDispatcher::instance();
if (eventDispatcher)
return eventDispatcher->hasPendingEvents();
return false;
}
#endif
/*!
Returns a pointer to the event dispatcher object for the main thread. If no
event dispatcher exists for the thread, this function returns 0.
*/
QAbstractEventDispatcher *QCoreApplication::eventDispatcher()
{
if (QCoreApplicationPrivate::theMainThread)
return QCoreApplicationPrivate::theMainThread->eventDispatcher();
return 0;
}
/*!
Sets the event dispatcher for the main thread to \a eventDispatcher. This
is only possible as long as there is no event dispatcher installed yet. That
is, before QCoreApplication has been instantiated. This method takes
ownership of the object.
*/
void QCoreApplication::setEventDispatcher(QAbstractEventDispatcher *eventDispatcher)
{
QThread *mainThread = QCoreApplicationPrivate::theMainThread;
if (!mainThread)
mainThread = QThread::currentThread(); // will also setup theMainThread
mainThread->setEventDispatcher(eventDispatcher);
}
#endif // QT_NO_QOBJECT
/*!
\macro Q_COREAPP_STARTUP_FUNCTION(QtStartUpFunction ptr)
\since 5.1
\relates QCoreApplication
\reentrant
Adds a global function that will be called from the QCoreApplication
constructor. This macro is normally used to initialize libraries
for program-wide functionality, without requiring the application to
call into the library for initialization.
The function specified by \a ptr should take no arguments and should
return nothing. For example:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 3
Note that the startup function will run at the end of the QCoreApplication constructor,
before any GUI initialization. If GUI code is required in the function,
use a timer (or a queued invocation) to perform the initialization later on,
from the event loop.
If QCoreApplication is deleted and another QCoreApplication is created,
the startup function will be invoked again.
*/
/*!
\fn void qAddPostRoutine(QtCleanUpFunction ptr)
\relates QCoreApplication
Adds a global routine that will be called from the QCoreApplication
destructor. This function is normally used to add cleanup routines
for program-wide functionality.
The cleanup routines are called in the reverse order of their addition.
The function specified by \a ptr should take no arguments and should
return nothing. For example:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 4
Note that for an application- or module-wide cleanup, qaddPostRoutine()
is often not suitable. For example, if the program is split into dynamically
loaded modules, the relevant module may be unloaded long before the
QCoreApplication destructor is called. In such cases, if using qaddPostRoutine()
is still desirable, qRemovePostRoutine() can be used to prevent a routine
from being called by the QCoreApplication destructor. For example, if that
routine was called before the module was unloaded.
For modules and libraries, using a reference-counted
initialization manager or Qt's parent-child deletion mechanism may
be better. Here is an example of a private class that uses the
parent-child mechanism to call a cleanup function at the right
time:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 5
By selecting the right parent object, this can often be made to
clean up the module's data at the right moment.
\sa qRemovePostRoutine()
*/
/*!
\fn void qRemovePostRoutine(QtCleanUpFunction ptr)
\relates QCoreApplication
\since 5.3
Removes the cleanup routine specified by \a ptr from the list of
routines called by the QCoreApplication destructor. The routine
must have been previously added to the list by a call to
qAddPostRoutine(), otherwise this function has no effect.
\sa qAddPostRoutine()
*/
/*!
\macro Q_DECLARE_TR_FUNCTIONS(context)
\relates QCoreApplication
The Q_DECLARE_TR_FUNCTIONS() macro declares and implements two
translation functions, \c tr() and \c trUtf8(), with these
signatures:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 6
This macro is useful if you want to use QObject::tr() or
QObject::trUtf8() in classes that don't inherit from QObject.
Q_DECLARE_TR_FUNCTIONS() must appear at the very top of the
class definition (before the first \c{public:} or \c{protected:}).
For example:
\snippet code/src_corelib_kernel_qcoreapplication.cpp 7
The \a context parameter is normally the class name, but it can
be any string.
\sa Q_OBJECT, QObject::tr(), QObject::trUtf8()
*/
QT_END_NAMESPACE