dummy change #2

shashim-quic · 2025-04-22T14:43:17Z

This is a dummy PR

Signed-off-by: Shiraz Hashim <quic_shashim@quicinc.com>

The ieee80211 skb control block key (set when skb was queued) could have been removed before ieee80211_tx_dequeue() call. ieee80211_tx_dequeue() already called ieee80211_tx_h_select_key() to get the current key, but the latter do not update the key in skb control block in case it is NULL. Because some drivers actually use this key in their TX callbacks (e.g. ath1{1,2}k_mac_op_tx()) this could lead to the use after free below: BUG: KASAN: slab-use-after-free in ath11k_mac_op_tx+0x590/0x61c Read of size 4 at addr ffffff803083c248 by task kworker/u16:4/1440 CPU: 3 UID: 0 PID: 1440 Comm: kworker/u16:4 Not tainted 6.13.0-ge128f627f404 #2 Hardware name: HW (DT) Workqueue: bat_events batadv_send_outstanding_bcast_packet Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x58/0x74 print_report+0x164/0x4c0 kasan_report+0xac/0xe8 __asan_report_load4_noabort+0x1c/0x24 ath11k_mac_op_tx+0x590/0x61c ieee80211_handle_wake_tx_queue+0x12c/0x1c8 ieee80211_queue_skb+0xdcc/0x1b4c ieee80211_tx+0x1ec/0x2bc ieee80211_xmit+0x224/0x324 __ieee80211_subif_start_xmit+0x85c/0xcf8 ieee80211_subif_start_xmit+0xc0/0xec4 dev_hard_start_xmit+0xf4/0x28c __dev_queue_xmit+0x6ac/0x318c batadv_send_skb_packet+0x38c/0x4b0 batadv_send_outstanding_bcast_packet+0x110/0x328 process_one_work+0x578/0xc10 worker_thread+0x4bc/0xc7c kthread+0x2f8/0x380 ret_from_fork+0x10/0x20 Allocated by task 1906: kasan_save_stack+0x28/0x4c kasan_save_track+0x1c/0x40 kasan_save_alloc_info+0x3c/0x4c __kasan_kmalloc+0xac/0xb0 __kmalloc_noprof+0x1b4/0x380 ieee80211_key_alloc+0x3c/0xb64 ieee80211_add_key+0x1b4/0x71c nl80211_new_key+0x2b4/0x5d8 genl_family_rcv_msg_doit+0x198/0x240 <...> Freed by task 1494: kasan_save_stack+0x28/0x4c kasan_save_track+0x1c/0x40 kasan_save_free_info+0x48/0x94 __kasan_slab_free+0x48/0x60 kfree+0xc8/0x31c kfree_sensitive+0x70/0x80 ieee80211_key_free_common+0x10c/0x174 ieee80211_free_keys+0x188/0x46c ieee80211_stop_mesh+0x70/0x2cc ieee80211_leave_mesh+0x1c/0x60 cfg80211_leave_mesh+0xe0/0x280 cfg80211_leave+0x1e0/0x244 <...> Reset SKB control block key before calling ieee80211_tx_h_select_key() to avoid that. Fixes: bb42f2d ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://patch.msgid.link/06aa507b853ca385ceded81c18b0a6dd0f081bc8.1742833382.git.repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>

SMC consists of two sockets: smc_sock and kernel TCP socket. Currently, there are two ways of creating the sockets, and syzbot reported a lockdep splat [0] for the newer way introduced by commit d25a92c ("net/smc: Introduce IPPROTO_SMC"). socket(AF_SMC , SOCK_STREAM, SMCPROTO_SMC or SMCPROTO_SMC6) socket(AF_INET or AF_INET6, SOCK_STREAM, IPPROTO_SMC) When a socket is allocated, sock_lock_init() sets a lockdep lock class to sk->sk_lock.slock based on its protocol family. In the IPPROTO_SMC case, AF_INET or AF_INET6 lock class is assigned to smc_sock. The repro sets IPV6_JOIN_ANYCAST for IPv6 UDP and SMC socket and exercises smc_switch_to_fallback() for IPPROTO_SMC. 1. smc_switch_to_fallback() is called under lock_sock() and holds smc->clcsock_release_lock. sk_lock-AF_INET6 -> &smc->clcsock_release_lock (sk_lock-AF_SMC) 2. Setting IPV6_JOIN_ANYCAST to SMC holds smc->clcsock_release_lock and calls setsockopt() for the kernel TCP socket, which holds RTNL and the kernel socket's lock_sock(). &smc->clcsock_release_lock -> rtnl_mutex (-> k-sk_lock-AF_INET6) 3. Setting IPV6_JOIN_ANYCAST to UDP holds RTNL and lock_sock(). rtnl_mutex -> sk_lock-AF_INET6 Then, lockdep detects a false-positive circular locking, .-> sk_lock-AF_INET6 -> &smc->clcsock_release_lock -> rtnl_mutex -. `-----------------------------------------------------------------' but IPPROTO_SMC should have the same locking rule as AF_SMC. sk_lock-AF_SMC -> &smc->clcsock_release_lock -> rtnl_mutex -> k-sk_lock-AF_INET6 Let's set the same lock class for smc_sock. Given AF_SMC uses the same lock class for SMCPROTO_SMC and SMCPROTO_SMC6, we do not need to separate the class for AF_INET and AF_INET6. [0]: WARNING: possible circular locking dependency detected 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Not tainted syz.4.1528/11571 is trying to acquire lock: ffffffff8fef8de8 (rtnl_mutex){+.+.}-{4:4}, at: ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 but task is already holding lock: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&smc->clcsock_release_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 smc_switch_to_fallback+0x2d/0xa00 net/smc/af_smc.c:903 smc_sendmsg+0x13d/0x520 net/smc/af_smc.c:2781 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (sk_lock-AF_INET6){+.+.}-{0:0}: lock_sock_nested+0x3a/0xf0 net/core/sock.c:3645 lock_sock include/net/sock.h:1624 [inline] sockopt_lock_sock net/core/sock.c:1133 [inline] sockopt_lock_sock+0x54/0x70 net/core/sock.c:1124 do_ipv6_setsockopt+0x2160/0x4520 net/ipv6/ipv6_sockglue.c:567 ipv6_setsockopt+0xcb/0x170 net/ipv6/ipv6_sockglue.c:993 udpv6_setsockopt+0x7d/0xd0 net/ipv6/udp.c:1850 do_sock_setsockopt+0x222/0x480 net/socket.c:2303 __sys_setsockopt+0x1a0/0x230 net/socket.c:2328 __do_sys_setsockopt net/socket.c:2334 [inline] __se_sys_setsockopt net/socket.c:2331 [inline] __x64_sys_setsockopt+0xbd/0x160 net/socket.c:2331 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: rtnl_mutex --> sk_lock-AF_INET6 --> &smc->clcsock_release_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&smc->clcsock_release_lock); lock(sk_lock-AF_INET6); lock(&smc->clcsock_release_lock); lock(rtnl_mutex); *** DEADLOCK *** 2 locks held by syz.4.1528/11571: #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: inode_lock include/linux/fs.h:877 [inline] #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: __sock_release+0x86/0x270 net/socket.c:646 #1: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 stack backtrace: CPU: 0 UID: 0 PID: 11571 Comm: syz.4.1528 Not tainted 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_circular_bug+0x490/0x760 kernel/locking/lockdep.c:2076 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2208 check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8b4b38d169 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe4efd22d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000b14a3 RCX: 00007f8b4b38d169 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f8b4b5a7ba0 R08: 0000000000000001 R09: 000000114efd25cf R10: 00007f8b4b200000 R11: 0000000000000246 R12: 00007f8b4b5a5fac R13: 00007f8b4b5a5fa0 R14: ffffffffffffffff R15: 00007ffe4efd23f0 </TASK> Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: syzbot+be6f4b383534d88989f7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=be6f4b383534d88989f7 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/20250407170332.26959-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== fib_rules: Fix iif / oif matching on L3 master device Patch #1 fixes a recently reported regression regarding FIB rules that match on iif / oif being a VRF device. Patch #2 adds test cases to the FIB rules selftest. ==================== Link: https://patch.msgid.link/20250414172022.242991-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Communicating with the hypervisor using the shared GHCB page requires clearing the C bit in the mapping of that page. When executing in the context of the EFI boot services, the page tables are owned by the firmware, and this manipulation is not possible. So switch to a different API for accepting memory in SEV-SNP guests, one which is actually supported at the point during boot where the EFI stub may need to accept memory, but the SEV-SNP init code has not executed yet. For simplicity, also switch the memory acceptance carried out by the decompressor when not booting via EFI - this only involves the allocation for the decompressed kernel, and is generally only called after kexec, as normal boot will jump straight into the kernel from the EFI stub. Fixes: 6c32117 ("x86/sev: Add SNP-specific unaccepted memory support") Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Cc: Dionna Amalie Glaze <dionnaglaze@google.com> Cc: Kevin Loughlin <kevinloughlin@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-efi@vger.kernel.org Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1 Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2 Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission

There is a potential deadlock if we do report zones in an IO context, detailed in below lockdep report. When one process do a report zones and another process freezes the block device, the report zones side cannot allocate a tag because the freeze is already started. This can thus result in new block group creation to hang forever, blocking the write path. Thankfully, a new block group should be created on empty zones. So, reporting the zones is not necessary and we can set the write pointer = 0 and load the zone capacity from the block layer using bdev_zone_capacity() helper. ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc1 #252 Not tainted ------------------------------------------------------ modprobe/1110 is trying to acquire lock: ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60 but task is already holding lock: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&q->q_usage_counter(queue)#16){++++}-{0:0}: blk_queue_enter+0x3d9/0x500 blk_mq_alloc_request+0x47d/0x8e0 scsi_execute_cmd+0x14f/0xb80 sd_zbc_do_report_zones+0x1c1/0x470 sd_zbc_report_zones+0x362/0xd60 blkdev_report_zones+0x1b1/0x2e0 btrfs_get_dev_zones+0x215/0x7e0 [btrfs] btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs] btrfs_make_block_group+0x36b/0x870 [btrfs] btrfs_create_chunk+0x147d/0x2320 [btrfs] btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs] start_transaction+0xce6/0x1620 [btrfs] btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs] kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&fs_info->dev_replace.rwsem){++++}-{4:4}: down_read+0x9b/0x470 btrfs_map_block+0x2ce/0x2ce0 [btrfs] btrfs_submit_chunk+0x2d4/0x16c0 [btrfs] btrfs_submit_bbio+0x16/0x30 [btrfs] btree_write_cache_pages+0xb5a/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}: __mutex_lock+0x1aa/0x1360 btree_write_cache_pages+0x252/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __lock_acquire+0x2f52/0x5ea0 lock_acquire+0x1b1/0x540 __flush_work+0x3ac/0xb60 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 del_gendisk+0x841/0xa20 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)#16 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#16); lock(&fs_info->dev_replace.rwsem); lock(&q->q_usage_counter(queue)#16); lock((work_completion)(&(&wb->dwork)->work)); *** DEADLOCK *** 5 locks held by modprobe/1110: #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0 #2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #3: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130 #4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60 stack backtrace: CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 #252 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_circular_bug.cold+0x1e0/0x274 check_noncircular+0x306/0x3f0 ? __pfx_check_noncircular+0x10/0x10 ? mark_lock+0xf5/0x1650 ? __pfx_check_irq_usage+0x10/0x10 ? lockdep_lock+0xca/0x1c0 ? __pfx_lockdep_lock+0x10/0x10 __lock_acquire+0x2f52/0x5ea0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 lock_acquire+0x1b1/0x540 ? __flush_work+0x38f/0xb60 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? __flush_work+0x38f/0xb60 __flush_work+0x3ac/0xb60 ? __flush_work+0x38f/0xb60 ? __pfx_mark_lock+0x10/0x10 ? __pfx___flush_work+0x10/0x10 ? __pfx_wq_barrier_func+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? mark_held_locks+0x94/0xe0 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 ? __pfx_bdi_unregister+0x10/0x10 ? up_write+0x1ba/0x510 del_gendisk+0x841/0xa20 ? __pfx_del_gendisk+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x35/0x60 ? __pm_runtime_resume+0x79/0x110 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] ? kernfs_remove_by_name_ns+0xc0/0xf0 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 ? __pfx___do_sys_delete_module.isra.0+0x10/0x10 ? __pfx_slab_free_after_rcu_debug+0x10/0x10 ? kasan_save_stack+0x2c/0x50 ? kasan_record_aux_stack+0xa3/0xb0 ? __call_rcu_common.constprop.0+0xc4/0xfb0 ? kmem_cache_free+0x3a0/0x590 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x93/0x180 ? lock_is_held_type+0xd5/0x130 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? lockdep_hardirqs_on+0x78/0x100 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? __pfx___call_rcu_common.constprop.0+0x10/0x10 ? kmem_cache_free+0x3a0/0x590 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx___x64_sys_openat+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f436712b68b RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> CC: <stable@vger.kernel.org> # 6.13+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>

[BUG] There is a bug report that a syzbot reproducer can lead to the following busy inode at unmount time: BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50 VFS: Busy inodes after unmount of loop1 (btrfs) ------------[ cut here ]------------ kernel BUG at fs/super.c:650! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650 Call Trace: <TASK> kill_anon_super+0x3a/0x60 fs/super.c:1237 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super fs/super.c:506 [inline] deactivate_super+0xe2/0x100 fs/super.c:502 cleanup_mnt+0x21f/0x440 fs/namespace.c:1435 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218 do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [CAUSE] When btrfs_alloc_path() failed, btrfs_iget() directly returned without releasing the inode already allocated by btrfs_iget_locked(). This results the above busy inode and trigger the kernel BUG. [FIX] Fix it by calling iget_failed() if btrfs_alloc_path() failed. If we hit error inside btrfs_read_locked_inode(), it will properly call iget_failed(), so nothing to worry about. Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a break of the normal error handling scheme, let's fix the obvious bug and backport first, then rework the error handling later. Reported-by: Penglei Jiang <superman.xpt@gmail.com> Link: https://lore.kernel.org/linux-btrfs/20250421102425.44431-1-superman.xpt@gmail.com/ Fixes: 7c855e1 ("btrfs: remove conditional path allocation in btrfs_read_locked_inode()") CC: stable@vger.kernel.org # 6.13+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Penglei Jiang <superman.xpt@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.15, round #2 - Single fix for broken usage of 'multi-MIDR' infrastructure in PI code, adding an open-coded erratum check for everyone's favorite pile of sand: Cavium ThunderX

…unload Kernel panic occurs when a devmem TCP socket is closed after NIC module is unloaded. This is Devmem TCP unregistration scenarios. number is an order. (a)netlink socket close (b)pp destroy (c)uninstall result 1 2 3 OK 1 3 2 (d)Impossible 2 1 3 OK 3 1 2 (e)Kernel panic 2 3 1 (d)Impossible 3 2 1 (d)Impossible (a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is closed. (b) page_pool_destroy() is called when the interface is down. (c) mp_ops->uninstall() is called when an interface is unregistered. (d) There is no scenario in mp_ops->uninstall() is called before page_pool_destroy(). Because unregister_netdevice_many_notify() closes interfaces first and then calls mp_ops->uninstall(). (e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire netdev_lock(). But if the interface module has already been removed, net_device pointer is invalid, so it causes kernel panic. In summary, there are only 3 possible scenarios. A. sk close -> pp destroy -> uninstall. B. pp destroy -> sk close -> uninstall. C. pp destroy -> uninstall -> sk close. Case C is a kernel panic scenario. In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set binding->dev to NULL. It indicates an bound net_device was unregistered. It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock() if binding->dev is NULL. A new binding->lock is added to protect a dev of a binding. So, lock ordering is like below. priv->lock netdev_lock(dev) binding->lock Tests: Scenario A: ./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \ -v 7 -t 1 -q 1 & pid=$! sleep 10 kill $pid ip link set $interface down modprobe -rv $module Scenario B: ./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \ -v 7 -t 1 -q 1 & pid=$! sleep 10 ip link set $interface down kill $pid modprobe -rv $module Scenario C: ./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \ -v 7 -t 1 -q 1 & pid=$! sleep 10 modprobe -rv $module sleep 5 kill $pid Splat looks like: Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf] CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f Tainted: [B]=BAD_PAGE, [W]=WARN RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746) Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811 RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4 R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88 FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ... netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3)) genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705) ... netlink_release (net/netlink/af_netlink.c:737) ... __sock_release (net/socket.c:647) sock_close (net/socket.c:1393) Fixes: 1d22d30 ("net: drop rtnl_lock for queue_mgmt operations") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250514154028.1062909-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a compile-time check that `*$ptr` is of the type of `$type->$($f)*`. Rename those placeholders for clarity. Given the incorrect usage: > diff --git a/rust/kernel/rbtree.rs b/rust/kernel/rbtree.rs > index 8d978c8..6a7089149878 100644 > --- a/rust/kernel/rbtree.rs > +++ b/rust/kernel/rbtree.rs > @@ -329,7 +329,7 @@ fn raw_entry(&mut self, key: &K) -> RawEntry<'_, K, V> { > while !(*child_field_of_parent).is_null() { > let curr = *child_field_of_parent; > // SAFETY: All links fields we create are in a `Node<K, V>`. > - let node = unsafe { container_of!(curr, Node<K, V>, links) }; > + let node = unsafe { container_of!(curr, Node<K, V>, key) }; > > // SAFETY: `node` is a non-null node so it is valid by the type invariants. > match key.cmp(unsafe { &(*node).key }) { this patch produces the compilation error: > error[E0308]: mismatched types > --> rust/kernel/lib.rs:220:45 > | > 220 | $crate::assert_same_type(field_ptr, (&raw const (*container_ptr).$($fields)*).cast_mut()); > | ------------------------ --------- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected `*mut rb_node`, found `*mut K` > | | | > | | expected all arguments to be this `*mut bindings::rb_node` type because they need to match the type of this parameter > | arguments to this function are incorrect > | > ::: rust/kernel/rbtree.rs:270:6 > | > 270 | impl<K, V> RBTree<K, V> > | - found this type parameter > ... > 332 | let node = unsafe { container_of!(curr, Node<K, V>, key) }; > | ------------------------------------ in this macro invocation > | > = note: expected raw pointer `*mut bindings::rb_node` > found raw pointer `*mut K` > note: function defined here > --> rust/kernel/lib.rs:227:8 > | > 227 | pub fn assert_same_type<T>(_: T, _: T) {} > | ^^^^^^^^^^^^^^^^ - ---- ---- this parameter needs to match the `*mut bindings::rb_node` type of parameter #1 > | | | > | | parameter #2 needs to match the `*mut bindings::rb_node` type of this parameter > | parameter #1 and parameter #2 both reference this parameter `T` > = note: this error originates in the macro `container_of` (in Nightly builds, run with -Z macro-backtrace for more info) [ We decided to go with a variation of v1 [1] that became v4, since it seems like the obvious approach, the error messages seem good enough and the debug performance should be fine, given the kernel is always built with -O2. In the future, we may want to make the helper non-hidden, with proper documentation, for others to use. [1] https://lore.kernel.org/rust-for-linux/CANiq72kQWNfSV0KK6qs6oJt+aGdgY=hXg=wJcmK3zYcokY1LNw@mail.gmail.com/ - Miguel ] Suggested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/all/CAH5fLgh6gmqGBhPMi2SKn7mCmMWfOSiS0WP5wBuGPYh9ZTAiww@mail.gmail.com/ Signed-off-by: Tamir Duberstein <tamird@gmail.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Link: https://lore.kernel.org/r/20250529-b4-container-of-type-check-v4-1-bf3a7ad73cec@gmail.com [ Added intra-doc link. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.16, take #2 - Rework of system register accessors for system registers that are directly writen to memory, so that sanitisation of the in-memory value happens at the correct time (after the read, or before the write). For convenience, RMW-style accessors are also provided. - Multiple fixes for the so-called "arch-timer-edge-cases' selftest, which was always broken.

As-per the SBI specification, an SBI remote fence operation applies to the entire address space if either: 1) start_addr and size are both 0 2) size is equal to 2^XLEN-1 >From the above, only #1 is checked by SBI SFENCE calls so fix the size parameter check in SBI SFENCE calls to cover #2 as well. Fixes: 13acfec ("RISC-V: KVM: Add remote HFENCE functions based on VCPU requests") Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Link: https://lore.kernel.org/r/20250605061458.196003-2-apatel@ventanamicro.com Signed-off-by: Anup Patel <anup@brainfault.org>

This patch fixes an issue seen in a large-scale deployment under heavy incoming pkts where the aRFS flow wrongly matches a flow and reprograms the NIC with wrong settings. That mis-steering causes RX-path latency spikes and noisy neighbor effects when many connections collide on the same hash (some of our production servers have 20-30K connections). set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by hashing the skb sized by the per rx-queue table size. This results in multiple connections (even across different rx-queues) getting the same hash value. The driver steer function modifies the wrong flow to use this rx-queue, e.g.: Flow#1 is first added: Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10 Later when a new flow needs to be added: Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20 The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This results in both flows getting un-optimized - packets for Flow#1 goes to q#20, and then reprogrammed back to q#10 later and so on; and Flow #2 programming is never done as Flow#1 is matched first for all misses. Many flows may wrongly share the same hash and reprogram rules of the original flow each with their own q#. Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s 72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS, enable aRFS (global value is 144 * rps_flow_cnt). Test notes about results from ice_rx_flow_steer(): --------------------------------------------------- 1. "Skip:" counter increments here: if (fltr_info->q_index == rxq_idx || arfs_entry->fltr_state != ICE_ARFS_ACTIVE) goto out; 2. "Add:" counter increments here: ret = arfs_entry->fltr_info.fltr_id; INIT_HLIST_NODE(&arfs_entry->list_entry); 3. "Update:" counter increments here: /* update the queue to forward to on an already existing flow */ Runtime comparison: original code vs with the patch for different rps_flow_cnt values. +-------------------------------+--------------+--------------+ | rps_flow_cnt | 512 | 2048 | +-------------------------------+--------------+--------------+ | Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K | | Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K | | CPU User | 216 vs 183 | 216 vs 206 | | CPU System | 1441 vs 1171 | 1447 vs 1320 | | CPU Softirq | 1245 vs 920 | 1238 vs 961 | | CPU Total | 29 vs 22.7 | 29 vs 24.9 | | aRFS Update | 533K vs 59 | 521K vs 32 | | aRFS Skip | 82M vs 77M | 7.2M vs 4.5M | +-------------------------------+--------------+--------------+ A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections showed no performance degradation. Some points on the patch/aRFS behavior: 1. Enabling full tuple matching ensures flows are always correctly matched, even with smaller hash sizes. 2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs and fewer calls to driver for programming on misses. 3. Larger hash tables reduces mis-steering due to more unique flow hashes, but still has clashes. However, with larger per-device rps_flow_cnt, old flows take more time to expire and new aRFS flows cannot be added if h/w limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt pkts have been processed by this cpu that are not part of the flow). Fixes: 28bf267 ("ice: Implement aRFS") Signed-off-by: Krishna Kumar <krikku@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d85 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896 __netif_receive_skb+0x1d/0x170 net/core/dev.c:6009 process_backlog+0x41e/0x13b0 net/core/dev.c:6357 __napi_poll+0xbd/0x710 net/core/dev.c:7191 napi_poll net/core/dev.c:7260 [inline] net_rx_action+0x9de/0xde0 net/core/dev.c:7382 handle_softirqs+0x19a/0x770 kernel/softirq.c:561 do_softirq.part.0+0x36/0x70 kernel/softirq.c:462 </IRQ> <TASK> do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679 dev_queue_xmit include/linux/netdevice.h:3313 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:459 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471 tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline] tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline] tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148 tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677 tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039 tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358 inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xf4/0x2a0 net/socket.c:733 __sys_sendto+0x29a/0x390 net/socket.c:2187 __do_sys_sendto net/socket.c:2194 [inline] __se_sys_sendto net/socket.c:2190 [inline] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f06553c47ed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000 </TASK> Modules linked in: [1]: dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat mount -t selinuxfs none /sys/fs/selinux load_policy netlabelctl calipso add pass doi:1 netlabelctl map del default netlabelctl map add default address:::1 protocol:calipso,1 sysctl net.ipv4.tcp_syncookies=2 nc -l ::1 80 & nc ::1 80 Fixes: e1adea9 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250617224125.17299-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to capture whether the filesystem has removed all DAX entries or not. And the fix has been applied on the filesystem xfs and ext4 by the commit 0e2f80a ("fs/dax: ensure all pages are idle prior to filesystem unmount"). Apply the missed fix on filesystem fuse to fix the runtime warning: [ 2.011450] ------------[ cut here ]------------ [ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.012468] Modules linked in: [ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef) [ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35 [ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202 [ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80 [ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000 [ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0 [ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000 [ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000 [ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0 [ 2.019518] Call Trace: [ 2.019729] <TASK> [ 2.019901] truncate_inode_pages_range+0xd8/0x400 [ 2.020280] ? timerqueue_add+0x66/0xb0 [ 2.020574] ? get_nohz_timer_target+0x2a/0x140 [ 2.020904] ? timerqueue_add+0x66/0xb0 [ 2.021231] ? timerqueue_del+0x2e/0x50 [ 2.021646] ? __remove_hrtimer+0x39/0x90 [ 2.022017] ? srso_alias_untrain_ret+0x1/0x10 [ 2.022497] ? psi_group_change+0x136/0x350 [ 2.023046] ? _raw_spin_unlock+0xe/0x30 [ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280 [ 2.024068] ? __schedule+0x532/0xbd0 [ 2.024551] fuse_evict_inode+0x29/0x190 [ 2.025131] evict+0x100/0x270 [ 2.025641] ? _atomic_dec_and_lock+0x39/0x50 [ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10 [ 2.026843] __dentry_kill+0x71/0x180 [ 2.027335] dput+0xeb/0x1b0 [ 2.027725] __fput+0x136/0x2b0 [ 2.028054] __x64_sys_close+0x3d/0x80 [ 2.028469] do_syscall_64+0x6d/0x1b0 [ 2.028832] ? clear_bhb_loop+0x30/0x80 [ 2.029182] ? clear_bhb_loop+0x30/0x80 [ 2.029533] ? clear_bhb_loop+0x30/0x80 [ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.030423] RIP: 0033:0x79ce03d0d067 [ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff [ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067 [ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d [ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000 [ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001 [ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003 [ 2.036301] </TASK> [ 2.036532] ---[ end trace 0000000000000000 ]--- Link: https://lkml.kernel.org/r/20250621171507.3770-1-haiyuewa@163.com Fixes: bde708f ("fs/dax: always remove DAX page-cache entries when breaking layouts") Signed-off-by: Haiyue Wang <haiyuewa@163.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 Cc: linux-cifs@vger.kernel.org Reported-by: David Howells <dhowells@redhat.com> Fixes: d7d7a66 ("cifs: avoid use of global locks for high contention data") Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>

When I run the NVME over TCP test in virtme-ng, I get the following "suspicious RCU usage" warning in nvme_mpath_add_sysfs_link(): ''' [ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77. [ 5.027401][ T183] nvme nvme0: creating 2 I/O queues. [ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues. [ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77 [ 5.042214][ T25] [ 5.042440][ T25] ============================= [ 5.042579][ T25] WARNING: suspicious RCU usage [ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted [ 5.042812][ T25] ----------------------------- [ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!! [ 5.043111][ T25] [ 5.043111][ T25] other info that might help us debug this: [ 5.043111][ T25] [ 5.043341][ T25] [ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1 [ 5.043502][ T25] 3 locks held by kworker/u9:0/25: [ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350 [ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350 [ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0 [ 5.044300][ T25] [ 5.044300][ T25] stack backtrace: [ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full) [ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044442][ T25] Workqueue: async async_run_entry_fn [ 5.044445][ T25] Call Trace: [ 5.044446][ T25] <TASK> [ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0 [ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0 [ 5.044459][ T25] ? queue_work_on+0x90/0xf0 [ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110 [ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0 [ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0 [ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10 [ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580 [ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0 [ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240 [ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10 [ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10 [ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0 [ 5.044498][ T25] ? validate_chain+0x232/0x4f0 [ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810 [ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10 [ 5.044508][ T25] ? find_held_lock+0x2b/0x80 [ 5.044512][ T25] ? ktime_get+0x16d/0x220 [ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30 [ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10 [ 5.044522][ T25] async_run_entry_fn+0x97/0x560 [ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044526][ T25] process_one_work+0xd3c/0x1350 [ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10 [ 5.044536][ T25] ? assign_work+0x16c/0x240 [ 5.044539][ T25] worker_thread+0x4da/0xd50 [ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10 [ 5.044546][ T25] kthread+0x356/0x5c0 [ 5.044548][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180 [ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044557][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044559][ T25] ret_from_fork+0x218/0x2e0 [ 5.044561][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044562][ T25] ret_from_fork_asm+0x1a/0x30 [ 5.044570][ T25] </TASK> ''' This patch uses sleepable RCU version of helper list_for_each_entry_srcu() instead of list_for_each_entry_rcu() to fix it. Fixes: 4dbd2b2 ("nvme-multipath: Add visibility for round-robin io-policy") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>

With VIRTCHNL2_CAP_MACFILTER enabled, the following warning is generated on module load: [ 324.701677] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578 [ 324.701684] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1582, name: NetworkManager [ 324.701689] preempt_count: 201, expected: 0 [ 324.701693] RCU nest depth: 0, expected: 0 [ 324.701697] 2 locks held by NetworkManager/1582: [ 324.701702] #0: ffffffff9f7be770 (rtnl_mutex){....}-{3:3}, at: rtnl_newlink+0x791/0x21e0 [ 324.701730] #1: ff1100216c380368 (_xmit_ETHER){....}-{2:2}, at: __dev_open+0x3f0/0x870 [ 324.701749] Preemption disabled at: [ 324.701752] [<ffffffff9cd23b9d>] __dev_open+0x3dd/0x870 [ 324.701765] CPU: 30 UID: 0 PID: 1582 Comm: NetworkManager Not tainted 6.15.0-rc5+ #2 PREEMPT(voluntary) [ 324.701771] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022 [ 324.701774] Call Trace: [ 324.701777] <TASK> [ 324.701779] dump_stack_lvl+0x5d/0x80 [ 324.701788] ? __dev_open+0x3dd/0x870 [ 324.701793] __might_resched.cold+0x1ef/0x23d <..> [ 324.701818] __mutex_lock+0x113/0x1b80 <..> [ 324.701917] idpf_ctlq_clean_sq+0xad/0x4b0 [idpf] [ 324.701935] ? kasan_save_track+0x14/0x30 [ 324.701941] idpf_mb_clean+0x143/0x380 [idpf] <..> [ 324.701991] idpf_send_mb_msg+0x111/0x720 [idpf] [ 324.702009] idpf_vc_xn_exec+0x4cc/0x990 [idpf] [ 324.702021] ? rcu_is_watching+0x12/0xc0 [ 324.702035] idpf_add_del_mac_filters+0x3ed/0xb50 [idpf] <..> [ 324.702122] __hw_addr_sync_dev+0x1cf/0x300 [ 324.702126] ? find_held_lock+0x32/0x90 [ 324.702134] idpf_set_rx_mode+0x317/0x390 [idpf] [ 324.702152] __dev_open+0x3f8/0x870 [ 324.702159] ? __pfx___dev_open+0x10/0x10 [ 324.702174] __dev_change_flags+0x443/0x650 <..> [ 324.702208] netif_change_flags+0x80/0x160 [ 324.702218] do_setlink.isra.0+0x16a0/0x3960 <..> [ 324.702349] rtnl_newlink+0x12fd/0x21e0 The sequence is as follows: rtnl_newlink()-> __dev_change_flags()-> __dev_open()-> dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock" idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON __dev_uc_sync() -> idpf_add_mac_filter -> idpf_add_del_mac_filters -> idpf_send_mb_msg() -> idpf_mb_clean() -> idpf_ctlq_clean_sq() # mutex_lock(cq_lock) Fix by converting cq_lock to a spinlock. All operations under the new lock are safe except freeing the DMA memory, which may use vunmap(). Fix by requesting a contiguous physical memory for the DMA mapping. Fixes: a251eee ("idpf: add SRIOV support and other ndo_ops") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

…-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered away thanks to L1TF, but panicking in this scenario is preferable to potentially running with corrupted state. Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Fixes: 0b020f5 ("KVM: SEV: Add support for SEV-ES intra host migration") Fixes: b566393 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Cc: James Houghton <jthoughton@google.com> Cc: Peter Gonda <pgonda@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: James Houghton <jthoughton@google.com> Link: https://lore.kernel.org/r/20250602224459.41505-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reported-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/ Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>

If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP is enabled for dm-bufio. However, when bufio tries to evict buffers, there is a chance to trigger scheduling in spin_lock_bh, the following warning is hit: BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2 preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by kworker/2:2/123: #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: dm_bufio_cache do_global_cleanup Call Trace: <TASK> dump_stack_lvl+0x53/0x70 __might_resched+0x360/0x4e0 do_global_cleanup+0x2f5/0x710 process_one_work+0x7db/0x1970 worker_thread+0x518/0xea0 kthread+0x359/0x690 ret_from_fork+0xf3/0x1b0 ret_from_fork_asm+0x1a/0x30 </TASK> That can be reproduced by: veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb SIZE=$(blockdev --getsz /dev/vda) dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet" mount /dev/dm-0 /mnt -o ro echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes [read files in /mnt] Cc: stable@vger.kernel.org # v6.4+ Fixes: 450e8de ("dm bufio: improve concurrent IO performance") Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com> Signed-off-by: Sheng Yong <shengyong1@xiaomi.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

This reverts commit 7796c97. This patch broke Dragonboard 845c (sdm845). I see: Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f20003e8 [#1] SMP pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] lr : snd_soc_dai_set_channel_map+0x34/0x78 Call trace: qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P) sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845] snd_soc_link_init+0x28/0x6c snd_soc_bind_card+0x5f4/0xb0c snd_soc_register_card+0x148/0x1a4 devm_snd_soc_register_card+0x50/0xb0 sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845] platform_probe+0x6c/0xd0 really_probe+0xc0/0x2a4 __driver_probe_device+0x7c/0x130 driver_probe_device+0x40/0x118 __device_attach_driver+0xc4/0x108 bus_for_each_drv+0x8c/0xf0 __device_attach+0xa4/0x198 device_initial_probe+0x18/0x28 bus_probe_device+0xb8/0xbc deferred_probe_work_func+0xac/0xfc process_one_work+0x244/0x658 worker_thread+0x1b4/0x360 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Kernel panic - not syncing: BRK handler: Fatal exception Dan has also reported following issues with the original patch https://lore.kernel.org/all/33fe8fe7-719a-405a-9ed2-d9f816ce1d57@sabinyo.mountain/ Bug #1: The zeroeth element of ctrl->pconfig[] is supposed to be unused. We start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128. Bug #2: There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts memory like Yongqin Liu pointed out. Bug 3: Like Jie Gan pointed out, it erases all the tx information with the rx information. Cc: stable@vger.kernel.org # v6.15+ Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Acked-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250709174949.8541-1-amit.pundir@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>

into HEAD KVM/riscv fixes for 6.16, take #2 - Disable vstimecmp before exiting to user-space - Move HGEI[E|P] CSR access to IMSIC virtualization

…git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: - Add new -D option that allows to override variables and options For example: ./ktest.pl -DPATCH_START:=HEAD~1 -DOUTPUT_DIR=/work/build/urgent config The above sets the variable "PATCH_START" to HEAD~1 and the OUTPUT_DIR option to "/work/build/urgent". This is useful because currently the only way to make a slight change to a config file is by modifying that config file. For one time changes, this can be annoying. Having a way to do a one time override from the command line simplifies the workflow. Temp variables (PATCH_START) will override every temp variable in the config file, whereas options will act like a normal OVERRIDE option and will only affect the session they define. -DBUILD_OUTPUT=/work/git/linux.git Replaces the default BUILD_OUTPUT option. '-DBUILD_OUTPUT[2]=/work/git/linux.git' Only replaces the BUILD_OUTPUT variable for test #2. - If an option contains itself, just drop it instead of going into an infinite loop and failing to parse (it doesn't crash, it detects the recursion after 100 iterations anyway). Some configs may define a variable with the same name as the option: ADD_CONFIG := $(ADD_CONFIG) But if the option doesn't exist, it the above will fail to parse. In these cases, just ignore evaluating the option inside the definition of another option if it has the same name. - Display the BUILD_DIR and OUTPUT_DIR options at the start of every test It is useful to know which kernel source and what destination a test is using when it starts, in case a mistake is made. This makes it easier to abort the test if the wrong source or destination is being used instead of waiting until the test completes. - Add new PATCHCHECK_SKIP option When testing a series of commits that also includes changes to the Linux tools directory, it is useless to test the changes in tools as they may not affect the kernel itself. Doing tests on the kernel for changes that do not affect the kernel is a waste of time. Add a PATCHCHECK_SKIP that takes a series of shas that will be skipped while doing the individual commit tests. * tag 'ktest-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Add new PATCHCHECK_SKIP option to skip testing individual commits ktest.pl: Always display BUILD_DIR and OUTPUT_DIR at the start of tests ktest.pl: Prevent recursion of default variable options ktest.pl: Have -D option work without a space ktest.pl: Allow command option -D to override temp variables ktest.pl: Add -D option to override options

With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>

The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue #1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue #2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <jpalus@fastmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tony Dinh <mibodhi@gmail.com> Tested-by: Jan Palus <jpalus@fastmail.com> Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com

…ostcopy When you run a KVM guest with vhost-net and migrate that guest to another host, and you immediately enable postcopy after starting the migration, there is a big chance that the network connection of the guest won't work anymore on the destination side after the migration. With a debug kernel v6.16.0, there is also a call trace that looks like this: FAULT_FLAG_ALLOW_RETRY missing 881 CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 #56 NONE Hardware name: IBM 3931 LA1 400 (LPAR) Workqueue: events irqfd_inject [kvm] Call Trace: [<00003173cbecc634>] dump_stack_lvl+0x104/0x168 [<00003173cca69588>] handle_userfault+0xde8/0x1310 [<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760 [<00003173cc759212>] __handle_mm_fault+0x452/0xa00 [<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0 [<00003173cc73409a>] __get_user_pages+0x4aa/0xba0 [<00003173cc7349e8>] get_user_pages_remote+0x258/0x770 [<000031734be6f052>] get_map_page+0xe2/0x190 [kvm] [<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm] [<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm] [<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm] [<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm] [<00003173cc00c9ec>] process_one_work+0x87c/0x1490 [<00003173cc00dda6>] worker_thread+0x7a6/0x1010 [<00003173cc02dc36>] kthread+0x3b6/0x710 [<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0 [<00003173cdd737ca>] ret_from_fork+0xa/0x30 3 locks held by kworker/6:2/549: #0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490 #1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490 #2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm] The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd() saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd cannot remotely resolve it (because the caller was asking for an immediate resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time). With that, get_map_page() failed and the irq was lost. We should not be strictly in an atomic environment here and the worker should be sleepable (the call is done during an ioctl from userspace), so we can allow adapter_indicators_set() to just sleep waiting for the remote fault instead. Link: https://issues.redhat.com/browse/RHEL-42486 Signed-off-by: Peter Xu <peterx@redhat.com> [thuth: Assembled patch description and fixed some cosmetical issues] Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Fixes: f654706 ("KVM: s390/interrupt: do not pin adapter interrupt pages") [frankja: Added fixes tag] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

syzkaller has caught us red-handed once more, this time nesting regular spinlocks behind raw spinlocks: ============================= [ BUG: Invalid wait context ] 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 Not tainted ----------------------------- syz.0.29/3743 is trying to lock: a3ff80008e2e9e18 (&xa->xa_lock#20){....}-{3:3}, at: vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137 other info that might help us debug this: context-{5:5} 3 locks held by syz.0.29/3743: #0: a3ff80008e2e90a8 (&kvm->slots_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x50/0x624 arch/arm64/kvm/vgic/vgic-init.c:499 #1: a3ff80008e2e9fa0 (&kvm->arch.config_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x5c/0x624 arch/arm64/kvm/vgic/vgic-init.c:500 #2: 58f0000021be1428 (&vgic_cpu->ap_list_lock){....}-{2:2}, at: vgic_flush_pending_lpis+0x3c/0x31c arch/arm64/kvm/vgic/vgic.c:150 stack backtrace: CPU: 0 UID: 0 PID: 3743 Comm: syz.0.29 Not tainted 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 dump_stack+0x1c/0x28 lib/dump_stack.c:129 print_lock_invalid_wait_context kernel/locking/lockdep.c:4833 [inline] check_wait_context kernel/locking/lockdep.c:4905 [inline] __lock_acquire+0x978/0x299c kernel/locking/lockdep.c:5190 lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5871 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x5c/0x7c kernel/locking/spinlock.c:162 vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137 vgic_flush_pending_lpis+0x24c/0x31c arch/arm64/kvm/vgic/vgic.c:158 __kvm_vgic_vcpu_destroy+0x44/0x500 arch/arm64/kvm/vgic/vgic-init.c:455 kvm_vgic_destroy+0x100/0x624 arch/arm64/kvm/vgic/vgic-init.c:505 kvm_arch_destroy_vm+0x80/0x138 arch/arm64/kvm/arm.c:244 kvm_destroy_vm virt/kvm/kvm_main.c:1308 [inline] kvm_put_kvm+0x800/0xff8 virt/kvm/kvm_main.c:1344 kvm_vm_release+0x58/0x78 virt/kvm/kvm_main.c:1367 __fput+0x4ac/0x980 fs/file_table.c:465 ____fput+0x20/0x58 fs/file_table.c:493 task_work_run+0x1bc/0x254 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] do_notify_resume+0x1b4/0x270 arch/arm64/kernel/entry-common.c:151 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xb4/0x160 arch/arm64/kernel/entry-common.c:768 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 This is of course no good, but is at odds with how LPI refcounts are managed. Solve the locking mess by deferring the release of unreferenced LPIs after the ap_list_lock is released. Mark these to-be-released LPIs specially to avoid racing with vgic_put_irq() and causing a double-free. Since references can only be taken on LPIs with a nonzero refcount, extending the lifetime of freed LPIs is still safe. Reviewed-by: Marc Zyngier <maz@kernel.org> Reported-by: syzbot+cef594105ac7e60c6d93@syzkaller.appspotmail.com Closes: https://lore.kernel.org/kvmarm/68acd0d9.a00a0220.33401d.048b.GAE@google.com/ Link: https://lore.kernel.org/r/20250905100531.282980-5-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan qualcomm-linux#2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>

The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 qualcomm-linux#2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…dlock When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ qualcomm-linux#10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] qualcomm-linux#1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] qualcomm-linux#2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] qualcomm-linux#3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k qualcomm-linux#1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c qualcomm-linux#1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c qualcomm-linux#2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 qualcomm-linux#3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k qualcomm-linux#1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 qualcomm-linux#6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a qualcomm-linux#1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b qualcomm-linux#2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b qualcomm-linux#3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b qualcomm-linux#4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 qualcomm-linux#6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 qualcomm-linux#2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c qualcomm-linux#1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c qualcomm-linux#2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k qualcomm-linux#1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: stable@vger.kernel.org Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if: 1) a phandle in the "cpus" property does not correspond to a valid OF node 2 a CPU logical id does not exist for a given OF cpu_node qualcomm-linux#1 is a firmware bug and should be reported as such but does not warrant a WARN_ON() backtrace. qualcomm-linux#2 is not necessarily an error condition (eg a kernel can be booted with nr_cpus=X limiting the number of cores artificially) and therefore there is no reason to clutter the kernel log with WARN_ON() output when the condition is hit. Rework the IRS affinity parsing code to remove undue WARN_ON()s thus making it less noisy. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250814094138.1611017-1-lpieralisi@kernel.org

When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c qualcomm-linux#2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 qualcomm-linux#3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e #427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 qualcomm-linux#1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 qualcomm-linux#2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 qualcomm-linux#3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000 5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The commit ced17ee ("Revert "virtio: reject shm region if length is zero"") exposes the following DAX page fault bug (this fix the failure that getting shm region alway returns false because of zero length): The commit 21aa65b ("mm: remove callers of pfn_t functionality") handles the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()' should be replaced with 'PHYS_PFN()'. [ 1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008 [ 1.390875] #PF: supervisor read access in kernel mode [ 1.391257] #PF: error_code(0x0000) - not-present page [ 1.391509] PGD 0 P4D 0 [ 1.391626] Oops: Oops: 0000 [qualcomm-linux#1] SMP NOPTI [ 1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE qualcomm-linux#2 PREEMPT(none) [ 1.392361] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.396268] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.396715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.397518] Call Trace: [ 1.397663] <TASK> [ 1.397900] dax_insert_entry+0x13b/0x390 [ 1.398179] dax_fault_iter+0x2a5/0x6c0 [ 1.398443] dax_iomap_pte_fault+0x193/0x3c0 [ 1.398750] __fuse_dax_fault+0x8b/0x270 [ 1.398997] ? vm_mmap_pgoff+0x161/0x210 [ 1.399175] __do_fault+0x30/0x180 [ 1.399360] do_fault+0xc4/0x550 [ 1.399547] __handle_mm_fault+0x8e3/0xf50 [ 1.399731] ? do_syscall_64+0x72/0x1e0 [ 1.399958] handle_mm_fault+0x192/0x2f0 [ 1.400204] do_user_addr_fault+0x20e/0x700 [ 1.400418] exc_page_fault+0x66/0x150 [ 1.400602] asm_exc_page_fault+0x26/0x30 [ 1.400831] RIP: 0033:0x72596d1bf703 [ 1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8 [ 1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202 [ 1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7 [ 1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560 [ 1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000 [ 1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001 [ 1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003 [ 1.404450] </TASK> [ 1.404570] Modules linked in: [ 1.404821] CR2: ffffd3fb40000008 [ 1.405029] ---[ end trace 0000000000000000 ]--- [ 1.405323] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.409170] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.409608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.410437] Kernel panic - not syncing: Fatal exception [ 1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 21aa65b ("mm: remove callers of pfn_t functionality") Signed-off-by: Haiyue Wang <haiyuewa@163.com> Link: https://lore.kernel.org/20250904120339.972-1-haiyuewa@163.com Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>

Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller qualcomm-linux#1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller qualcomm-linux#2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller qualcomm-linux#3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only calls phylink_major_config() if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()). We need to change nothing there. Other solutions =============== The lock inversion between &pl->state_mutex and &pl->phydev->lock has occurred at least once before, as seen in commit c718af2 ("net: phylink: fix ethtool -A with attached PHYs"). The solution there was to simply not call phy_set_asym_pause() under the &pl->state_mutex. That cannot be extended to our case though, where the phy_config_inband() call is much deeper inside the &pl->state_mutex section. Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue qualcomm-linux#1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue qualcomm-linux#2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <jpalus@fastmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tony Dinh <mibodhi@gmail.com> Tested-by: Jan Palus <jpalus@fastmail.com> Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com

This attemps to fix possible UAFs caused by struct mgmt_pending being freed while still being processed like in the following trace, in order to fix mgmt_pending_valid is introduce and use to check if the mgmt_pending hasn't been removed from the pending list, on the complete callbacks it is used to check and in addtion remove the cmd from the list while holding mgmt_pending_lock to avoid TOCTOU problems since if the cmd is left on the list it can still be accessed and freed. BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55 CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 12210: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296 __add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247 add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 sock_write_iter+0x258/0x330 net/socket.c:1133 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 12221: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4648 [inline] kfree+0x18e/0x440 mm/slub.c:4847 mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline] mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257 __mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444 hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290 hci_dev_do_close net/bluetooth/hci_core.c:501 [inline] hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526 sock_do_ioctl+0xd9/0x300 net/socket.c:1192 sock_ioctl+0x576/0x790 net/socket.c:1313 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: cf75ad8 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED") Fixes: 2bd1b23 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_DISCOVERABLE to use cmd_sync") Fixes: f056a65 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_CONNECTABLE to use cmd_sync") Fixes: 3244845 ("Bluetooth: hci_sync: Convert MGMT_OP_SSP") Fixes: d81a494 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LE") Fixes: b338d91 ("Bluetooth: Implement support for Mesh") Fixes: 6f6ff38 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME") Fixes: 71efbb0 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_PHY_CONFIGURATION") Fixes: b747a83 ("Bluetooth: hci_sync: Refactor add Adv Monitor") Fixes: abfeea4 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Fixes: 26ac4c5 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_ADVERTISING") Reported-by: cen zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Ido Schimmel says: ==================== nexthop: Various fixes Patch #1 fixes a NPD that was recently reported by syzbot. Patch #2 fixes an issue in the existing FIB nexthop selftest. Patch #3 extends the selftest with test cases for the bug that was fixed in the first patch. ==================== Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Write combining is an optimization feature in CPUs that is frequently used by modern devices to generate 32 or 64 byte TLPs at the PCIe level. These large TLPs allow certain optimizations in the driver to HW communication that improve performance. As WC is unpredictable and optional the HW designs all tolerate cases where combining doesn't happen and simply experience a performance degradation. Unfortunately many virtualization environments on all architectures have done things that completely disable WC inside the VM with no generic way to detect this. For example WC was fully blocked in ARM64 KVM until commit 8c47ce3 ("KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device"). Trying to use WC when it is known not to work has a measurable performance cost (~5%). Long ago mlx5 developed an boot time algorithm to test if WC is available or not by using unique mlx5 HW features to measure how many large TLPs the device is receiving. The SW generates a large number of combining opportunities and if any succeed then WC is declared working. In mlx5 the WC optimization feature is never used by the kernel except for the boot time test. The WC is only used by userspace in rdma-core. Sadly modern ARM CPUs, especially NVIDIA Grace, have a combining implementation that is very unreliable compared to pretty much everything prior. This is being fixed architecturally in new CPUs with a new ST64B instruction, but current shipping devices suffer this problem. Unreliable means the SW can present thousands of combining opportunities and the HW will not combine for any of them, which creates a performance degradation, and critically fails the mlx5 boot test. However, the CPU is very sensitive to the instruction sequence used, with the better options being sufficiently good that the performance loss from the unreliable CPU is not measurable. Broadly there are several options, from worst to best: 1) A C loop doing a u64 memcpy. This was used prior to commit ef30228 ("IB/mlx5: Use __iowrite64_copy() for write combining stores") and failed almost all the time on Grace CPUs. 2) ARM64 assembly with consecutive 8 byte stores. This was implemented as an arch-generic __iowriteXX_copy() family of functions suitable for performance use in drivers for WC. commit ead7911 ("arm64/io: Provide a WC friendly __iowriteXX_copy()") provided the ARM implementation. 3) ARM64 assembly with consecutive 16 byte stores. This was rejected from kernel use over fears of virtualization failures. Common ARM VMMs will crash if STP is used against emulated memory. 4) A single NEON store instruction. Userspace has used this option for a very long time, it performs well. 5) For future silicon the new ST64B instruction is guaranteed to generate a 64 byte TLP 100% of the time The past upgrade from #1 to #2 was thought to be sufficient to solve this problem. However, more testing on more systems shows that #3 is still problematic at a low frequency and the kernel test fails. Thus, make the mlx5 use the same instructions as userspace during the boot time WC self test. This way the WC test matches the userspace and will properly detect the ability of HW to support the WC workload that userspace will generate. While #4 still has imperfect combining performance, it is substantially better than #2, and does actually give a performance win to applications. Self-test failures with #2 are like 3/10 boots, on some systems, #4 has never seen a boot failure. There is no real general use case for a NEON based WC flow in the kernel. This is not suitable for any performance path work as getting into/out of a NEON context is fairly expensive compared to the gain of WC. Future CPUs are going to fix this issue by using an new ARM instruction and __iowriteXX_copy() will be updated to use that automatically, probably using the ALTERNATES mechanism. Since this problem is constrained to mlx5's unique situation of needing a non-performance code path to duplicate what mlx5 userspace is doing as a matter of self-testing, implement it as a one line inline assembly in the driver directly. Lastly, this was concluded from the discussion with ARM maintainers which confirms that this is the best approach for the solution: https://lore.kernel.org/r/aHqN_hpJl84T1Usi@arm.com Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1759093688-841357-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Expand the prefault memory selftest to add a regression test for a KVM bug where KVM's retry logic would result in (breakable) deadlock due to the memslot deletion waiting on prefaulting to release SRCU, and prefaulting waiting on the memslot to fully disappear (KVM uses a two-step process to delete memslots, and KVM x86 retries page faults if a to-be-deleted, a.k.a. INVALID, memslot is encountered). To exercise concurrent memslot remove, spawn a second thread to initiate memslot removal at roughly the same time as prefaulting. Test memslot removal for all testcases, i.e. don't limit concurrent removal to only the success case. There are essentially three prefault scenarios (so far) that are of interest: 1. Success 2. ENOENT due to no memslot 3. EAGAIN due to INVALID memslot For all intents and purposes, #1 and #2 are mutually exclusive, or rather, easier to test via separate testcases since writing to non-existent memory is trivial. But for #3, making it mutually exclusive with #1 _or_ #2 is actually more complex than testing memslot removal for all scenarios. The only requirement to let memslot removal coexist with other scenarios is a way to guarantee a stable result, e.g. that the "no memslot" test observes ENOENT, not EAGAIN, for the final checks. So, rather than make memslot removal mutually exclusive with the ENOENT scenario, simply restore the memslot and retry prefaulting. For the "no memslot" case, KVM_PRE_FAULT_MEMORY should be idempotent, i.e. should always fail with ENOENT regardless of how many times userspace attempts prefaulting. Pass in both the base GPA and the offset (instead of the "full" GPA) so that the worker can recreate the memslot. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20250924174255.2141847-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

Since blamed commit, unregister_netdevice_many_notify() takes the netdev mutex if the device needs it. If the device list is too long, this will lock more device mutexes than lockdep can handle: unshare -n \ bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done' BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by kworker/u16:1/69: #0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work #1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work #2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net #3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch #4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify [..] Add a helper to close and then unlock a list of net_devices. Devices that are not up have to be skipped - netif_close_many always removes them from the list without any other actions taken, so they'd remain in locked state. Close devices whenever we've used up half of the tracking slots or we processed entire list without hitting the limit. Fixes: 7e4d784 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The original code causes a circular locking dependency found by lockdep. ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U ------------------------------------------------------ xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660 but task is already holding lock: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devcd->mutex){+.+.}-{3:3}: mutex_lock_nested+0x4e/0xc0 devcd_data_write+0x27/0x90 sysfs_kf_bin_write+0x80/0xf0 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (kn->active#236){++++}-{0:0}: kernfs_drain+0x1e2/0x200 __kernfs_remove+0xae/0x400 kernfs_remove_by_name_ns+0x5d/0xc0 remove_files+0x54/0x70 sysfs_remove_group+0x3d/0xa0 sysfs_remove_groups+0x2e/0x60 device_remove_attrs+0xc7/0x100 device_del+0x15d/0x3b0 devcd_del+0x19/0x30 process_one_work+0x22b/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11c/0x250 ret_from_fork+0x26c/0x2e0 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}: __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 __flush_work+0x27a/0x660 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devcd->mutex); lock(kn->active#236); lock(&devcd->mutex); lock((work_completion)(&(&devcd->del_wk)->work)); *** DEADLOCK *** 5 locks held by xe_fault_inject/5091: #0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 #1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220 #2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280 #3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 #4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660 stack backtrace: CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)} Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021 Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 dump_stack+0x10/0x20 print_circular_bug+0x285/0x360 check_noncircular+0x135/0x150 ? register_lock_class+0x48/0x4a0 __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 ? __flush_work+0x25d/0x660 ? mark_held_locks+0x46/0x90 ? __flush_work+0x25d/0x660 __flush_work+0x27a/0x660 ? __flush_work+0x25d/0x660 ? trace_hardirqs_on+0x1e/0xd0 ? __pfx_wq_barrier_func+0x10/0x10 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 ? bus_find_device+0xa8/0xe0 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 ? __f_unlock_pos+0x15/0x20 ? __x64_sys_getdents64+0x9b/0x130 ? __pfx_filldir64+0x10/0x10 ? do_syscall_64+0x1a2/0xb60 ? clear_bhb_loop+0x30/0x80 ? clear_bhb_loop+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x76e292edd574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574 RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063 R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000 </TASK> xe 0000:03:00.0: [drm] Xe device coredump has been deleted. Fixes: 01daccf ("devcoredump : Serialize devcd_del work") Cc: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Danilo Krummrich <dakr@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Cc: Matthew Brost <matthew.brost@intel.com> Acked-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250723142416.1020423-1-dev@lankhorst.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x1635/0x2810 [86.863152] lock_acquire+0xc4/0x2f0 [86.863166] cpus_read_lock+0x41/0x100 [86.863180] stop_machine+0x1c/0x50 [86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.864735] __vma_bind+0x55/0x70 [i915] [86.865510] fence_work+0x26/0xa0 [i915] [86.866248] fence_notify+0xa1/0x140 [i915] [86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.867719] i915_sw_fence_commit+0x39/0x60 [i915] [86.868453] i915_vma_pin_ww+0x462/0x1360 [i915] [86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.870001] initial_plane_vma+0x307/0x840 [i915] [86.870774] intel_initial_plane_config+0x33f/0x670 [i915] [86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.872330] i915_driver_probe+0x7fa/0xe80 [i915] [86.873057] i915_pci_probe+0xe6/0x220 [i915] [86.873782] local_pci_probe+0x47/0xb0 [86.873802] pci_device_probe+0xf3/0x260 [86.873817] really_probe+0xf1/0x3c0 [86.873833] __driver_probe_device+0x8c/0x180 [86.873848] driver_probe_device+0x24/0xd0 [86.873862] __driver_attach+0x10f/0x220 [86.873876] bus_for_each_dev+0x7f/0xe0 [86.873892] driver_attach+0x1e/0x30 [86.873904] bus_add_driver+0x151/0x290 [86.873917] driver_register+0x5e/0x130 [86.873931] __pci_register_driver+0x7d/0x90 [86.873945] i915_pci_register_driver+0x23/0x30 [i915] [86.874678] i915_init+0x37/0x120 [i915] [86.875347] do_one_initcall+0x60/0x3f0 [86.875369] do_init_module+0x97/0x2a0 [86.875385] load_module+0x2c54/0x2d80 [86.875398] init_module_from_file+0x96/0xe0 [86.875413] idempotent_init_module+0x117/0x330 [86.875426] __x64_sys_finit_module+0x77/0x100 [86.875440] x64_sys_call+0x24de/0x2660 [86.875454] do_syscall_64+0x91/0xe90 [86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.875486] other info that might help us debug this: [86.875502] Chain exists of: cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [86.875539] Possible unsafe locking scenario: [86.875552] CPU0 CPU1 [86.875563] ---- ---- [86.875573] lock(reservation_ww_class_mutex); [86.875588] lock(reservation_ww_class_acquire); [86.875606] lock(reservation_ww_class_mutex); [86.875624] rlock(cpu_hotplug_lock); [86.875637] *** DEADLOCK *** [86.875650] 3 locks held by i915_module_loa/1432: [86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220 [86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.877305] stack backtrace: [86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary) [86.877334] Tainted: [U]=USER [86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020 [86.877339] Call Trace: [86.877344] <TASK> [86.877353] dump_stack_lvl+0x91/0xf0 [86.877364] dump_stack+0x10/0x20 [86.877369] print_circular_bug+0x285/0x360 [86.877379] check_noncircular+0x135/0x150 [86.877390] __lock_acquire+0x1635/0x2810 [86.877403] lock_acquire+0xc4/0x2f0 [86.877408] ? stop_machine+0x1c/0x50 [86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878173] cpus_read_lock+0x41/0x100 [86.878182] ? stop_machine+0x1c/0x50 [86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878916] stop_machine+0x1c/0x50 [86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.880375] __vma_bind+0x55/0x70 [i915] [86.881133] fence_work+0x26/0xa0 [i915] [86.881851] fence_notify+0xa1/0x140 [i915] [86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.883286] i915_sw_fence_commit+0x39/0x60 [i915] [86.884003] i915_vma_pin_ww+0x462/0x1360 [i915] [86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915] [86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.886281] initial_plane_vma+0x307/0x840 [i915] [86.887049] intel_initial_plane_config+0x33f/0x670 [i915] [86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.888587] i915_driver_probe+0x7fa/0xe80 [i915] [86.889293] ? mutex_unlock+0x12/0x20 [86.889301] ? drm_privacy_screen_get+0x171/0x190 [86.889308] ? acpi_dev_found+0x66/0x80 [86.889321] i915_pci_probe+0xe6/0x220 [i915] [86.890038] local_pci_probe+0x47/0xb0 [86.890049] pci_device_probe+0xf3/0x260 [86.890058] really_probe+0xf1/0x3c0 [86.890067] __driver_probe_device+0x8c/0x180 [86.890072] driver_probe_device+0x24/0xd0 [86.890078] __driver_attach+0x10f/0x220 [86.890083] ? __pfx___driver_attach+0x10/0x10 [86.890088] bus_for_each_dev+0x7f/0xe0 [86.890097] driver_attach+0x1e/0x30 [86.890101] bus_add_driver+0x151/0x290 [86.890107] driver_register+0x5e/0x130 [86.890113] __pci_register_driver+0x7d/0x90 [86.890119] i915_pci_register_driver+0x23/0x30 [i915] [86.890833] i915_init+0x37/0x120 [i915] [86.891482] ? __pfx_i915_init+0x10/0x10 [i915] [86.892135] do_one_initcall+0x60/0x3f0 [86.892145] ? __kmalloc_cache_noprof+0x33f/0x470 [86.892157] do_init_module+0x97/0x2a0 [86.892164] load_module+0x2c54/0x2d80 [86.892168] ? __kernel_read+0x15c/0x300 [86.892185] ? kernel_read_file+0x2b1/0x320 [86.892195] init_module_from_file+0x96/0xe0 [86.892199] ? init_module_from_file+0x96/0xe0 [86.892211] idempotent_init_module+0x117/0x330 [86.892224] __x64_sys_finit_module+0x77/0x100 [86.892230] x64_sys_call+0x24de/0x2660 [86.892236] do_syscall_64+0x91/0xe90 [86.892243] ? irqentry_exit+0x77/0xb0 [86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0 [86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.892261] RIP: 0033:0x7303e1b2725d [86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48 [86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d [86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c [86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80 [86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0 [86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710 [86.892304] </TASK> Call asynchronous variant of dma_fence_work_commit() in that case. v3: Provide more verbose in-line comment (Andi), - mention target environments in commit message. Fixes: 7d1c261 ("drm/i915: Take reservation lock around i915_vma_pin.") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985 Cc: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Acked-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20251023082925.351307-6-janusz.krzysztofik@linux.intel.com (cherry picked from commit 648ef1324add1c2e2b6041cdf0b28d31fbca5f13) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

When a connector is connected but inactive (e.g., disabled by desktop environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading odm_combine_segments causes kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 16 UID: 0 PID: 26474 Comm: cat Not tainted 6.17.0+ #2 PREEMPT(lazy) e6a17af9ee6db7c63e9d90dbe5b28ccab67520c6 Hardware name: LENOVO 21Q4/LNVNB161216, BIOS PXCN25WW 03/27/2025 RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu] Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00> RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286 RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8 RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0 R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08 R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> seq_read_iter+0x125/0x490 ? __alloc_frozen_pages_noprof+0x18f/0x350 seq_read+0x12c/0x170 full_proxy_read+0x51/0x80 vfs_read+0xbc/0x390 ? __handle_mm_fault+0xa46/0xef0 ? do_syscall_64+0x71/0x900 ksys_read+0x73/0xf0 do_syscall_64+0x71/0x900 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f44d4031687 Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00> RSP: 002b:00007ffdb4b5f0b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007f44d3f9f740 RCX: 00007f44d4031687 RDX: 0000000000040000 RSI: 00007f44d3f5e000 RDI: 0000000000000003 RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007f44d3f5e000 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000040000 </TASK> Modules linked in: tls tcp_diag inet_diag xt_mark ccm snd_hrtimer snd_seq_dummy snd_seq_midi snd_seq_oss snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device x> snd_hda_codec_atihdmi snd_hda_codec_realtek_lib lenovo_wmi_helpers think_lmi snd_hda_codec_generic snd_hda_codec_hdmi snd_soc_core kvm snd_compress uvcvideo sn> platform_profile joydev amd_pmc mousedev mac_hid sch_fq_codel uinput i2c_dev parport_pc ppdev lp parport nvme_fabrics loop nfnetlink ip_tables x_tables dm_cryp> CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu] Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00> RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286 RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8 RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0 R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08 R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0 PKRU: 55555554 Fix this by checking pipe_ctx->stream_res.tg before dereferencing. Fixes: 07926ba ("drm/amd/display: Add debugfs interface for ODM combine info") Signed-off-by: Rong Zhang <i@rong.moe> Reviewed-by: Mario Limoncello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f19bbecd34e3c15eed7e5e593db2ac0fc7a0e6d8) Cc: stable@vger.kernel.org

Michael Chan says: ==================== bnxt_en: Bug fixes Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver coredump feature recently added in 6.13. Patch #1 adds the necessary call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes a possible null pointer derefernce when using early versions of the FW with this feature. Patch #4 adds the coredump header information unconditionally to make it more robust. Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5 eliminates a dmesg warning when doing devlink reload. ==================== Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add VMX exit handlers for SEAMCALL and TDCALL to inject a #UD if a non-TD guest attempts to execute SEAMCALL or TDCALL. Neither SEAMCALL nor TDCALL is gated by any software enablement other than VMXON, and so will generate a VM-Exit instead of e.g. a native #UD when executed from the guest kernel. Note! No unprivileged DoS of the L1 kernel is possible as TDCALL and SEAMCALL #GP at CPL > 0, and the CPL check is performed prior to the VMX non-root (VM-Exit) check, i.e. userspace can't crash the VM. And for a nested guest, KVM forwards unknown exits to L1, i.e. an L2 kernel can crash itself, but not L1. Note #2! The Intel® Trust Domain CPU Architectural Extensions spec's pseudocode shows the CPL > 0 check for SEAMCALL coming _after_ the VM-Exit, but that appears to be a documentation bug (likely because the CPL > 0 check was incorrectly bundled with other lower-priority #GP checks). Testing on SPR and EMR shows that the CPL > 0 check is performed before the VMX non-root check, i.e. SEAMCALL #GPs when executed in usermode. Note #3! The aforementioned Trust Domain spec uses confusing pseudocode that says that SEAMCALL will #UD if executed "inSEAM", but "inSEAM" specifically means in SEAM Root Mode, i.e. in the TDX-Module. The long- form description explicitly states that SEAMCALL generates an exit when executed in "SEAM VMX non-root operation". But that's a moot point as the TDX-Module injects #UD if the guest attempts to execute SEAMCALL, as documented in the "Unconditionally Blocked Instructions" section of the TDX-Module base specification. Cc: stable@vger.kernel.org Cc: Kai Huang <kai.huang@intel.com> Cc: Xiaoyao Li <xiaoyao.li@intel.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20251016182148.69085-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

into HEAD KVM/riscv fixes for 6.18, take #2 - Fix check for local interrupts on riscv32 - Read HGEIP CSR on the correct cpu when checking for IMSIC interrupts - Remove automatic I/O mapping from kvm_arch_prepare_memory_region()

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm654 fixes for 6.18, take #2 * Core fixes - Fix trapping regression when no in-kernel irqchip is present (20251021094358.1963807-1-sascha.bischoff@arm.com) - Check host-provided, untrusted ranges and offsets in pKVM (20251016164541.3771235-1-vdonnefort@google.com) (20251017075710.2605118-1-sebastianene@google.com) - Fix regression restoring the ID_PFR1_EL1 register (20251030122707.2033690-1-maz@kernel.org - Fix vgic ITS locking issues when LPIs are not directly injected (20251107184847.1784820-1-oupton@kernel.org) * Test fixes - Correct target CPU programming in vgic_lpi_stress selftest (20251020145946.48288-1-mdittgen@amazon.de) - Fix exposure of SCTLR2_EL2 and ZCR_EL2 in get-reg-list selftest (20251023-b4-kvm-arm64-get-reg-list-sctlr-el2-v1-1-088f88ff992a@kernel.org) (20251024-kvm-arm64-get-reg-list-zcr-el2-v1-1-0cd0ff75e22f@kernel.org) * Misc - Update Oliver's email address (20251107012830.1708225-1-oupton@kernel.org)

When freeing indexed arrays, the corresponding free function should be called for each entry of the indexed array. For example, for for 'struct tc_act_attrs' 'tc_act_attrs_free(...)' needs to be called for each entry. Previously, memory leaks were reported when enabling the ASAN analyzer. ================================================================= ==874==ERROR: LeakSanitizer: detected memory leaks Direct leak of 24 byte(s) in 1 object(s) allocated from: #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67 #1 0x55c98db048af in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813 #2 0x55c98db048af in main ./linux/tools/net/ynl/samples/tc-filter-add.c:71 Direct leak of 24 byte(s) in 1 object(s) allocated from: #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67 #1 0x55c98db04a93 in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813 #2 0x55c98db04a93 in main ./linux/tools/net/ynl/samples/tc-filter-add.c:74 Direct leak of 10 byte(s) in 2 object(s) allocated from: #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67 #1 0x55c98db0527d in tc_act_attrs_set_kind ../generated/tc-user.h:1622 SUMMARY: AddressSanitizer: 58 byte(s) leaked in 4 allocation(s). The following diff illustrates the changes introduced compared to the previous version of the code. void tc_flower_attrs_free(struct tc_flower_attrs *obj) { + unsigned int i; + free(obj->indev); + for (i = 0; i < obj->_count.act; i++) + tc_act_attrs_free(&obj->act[i]); free(obj->act); free(obj->key_eth_dst); free(obj->key_eth_dst_mask); Signed-off-by: Zahari Doychev <zahari.doychev@linux.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20251106151529.453026-3-zahari.doychev@linux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Handle skb allocation failures in RX path, to avoid NULL pointer dereference and RX stalls under memory pressure. If the refill fails with -ENOMEM, complete napi polling and wake up later to retry via timer. Also explicitly re-enable RX DMA after oom, so the dmac doesn't remain stopped in this situation. Previously, memory pressure could lead to skb allocation failures and subsequent Oops like: Oops: Kernel access of bad area, sig: 11 [#2] Hardware name: SonyPS3 Cell Broadband Engine 0x701000 PS3 NIP [c0003d0000065900] gelic_net_poll+0x6c/0x2d0 [ps3_gelic] (unreliable) LR [c0003d00000659c4] gelic_net_poll+0x130/0x2d0 [ps3_gelic] Call Trace: gelic_net_poll+0x130/0x2d0 [ps3_gelic] (unreliable) __napi_poll+0x44/0x168 net_rx_action+0x178/0x290 Steps to reproduce the issue: 1. Start a continuous network traffic, like scp of a 20GB file 2. Inject failslab errors using the kernel fault injection: echo -1 > /sys/kernel/debug/failslab/times echo 30 > /sys/kernel/debug/failslab/interval echo 100 > /sys/kernel/debug/failslab/probability 3. After some time, traces start to appear, kernel Oopses and the system stops Step 2 is not always necessary, as it is usually already triggered by the transfer of a big enough file. Fixes: 02c1889 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Florian Fuchs <fuchsfl@gmail.com> Link: https://patch.msgid.link/20251113181000.3914980-1-fuchsfl@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dummy change

b8824cf

Signed-off-by: Shiraz Hashim <quic_shashim@quicinc.com>

shashim-quic closed this Apr 22, 2025

shashim-quic deleted the for-pinctrl branch April 22, 2025 14:43

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

dummy change #2

dummy change #2

Uh oh!

shashim-quic commented Apr 22, 2025

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

dummy change #2

dummy change #2

Uh oh!

Conversation

shashim-quic commented Apr 22, 2025

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant