Michel Racic edited this page Jan 31, 2017 · 9 revisions

Pinout Sensor on flex cable

Flex cable pinout Pullup resistors may be used to reduce noise from PSU. On the adafruit breakout they used 10kΩ on SCL, GND and SDA.

Mapping flex PCB to chip PINs

  • VCC = Pin 5 (VDD) + Pin 6 (nRESET)
  • SCL = Pin 4 (T)
  • GND = Pin 2 (R)
  • SDA = Pin 1 (RH)


Solder a cable to use it on breadboard

Sample pictures from Urs Marti Soldered Hot glued Shrinkwrapped