While primarily being developed for the OsmoSDR hardware, this block as well supports: * FUNcube Dongle through libgnuradio-fcd * FUNcube Dongle Pro+ through gr-fcdproplus * RTL2832U based DVB-T dongles through librtlsdr * RTL-TCP spectrum server (see librtlsdr project) * SDRplay RSP through SDRplay API library * gnuradio .cfile input through libgnuradio-blocks * RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option) * AirSpy Wideband Receiver through libairspy * CCCamp 2015 rad1o Badge through libhackrf * Great Scott Gadgets HackRF through libhackrf * Nuand LLC bladeRF through libbladeRF library * Ettus USRP Devices through Ettus UHD library * Fairwaves UmTRX through Fairwaves' module for UHD * Fairwaves XTRX through libxtrx * Red Pitaya SDR transceiver (http://bazaar.redpitaya.com) * FreeSRP through libfreesrp * Spyserver By using the OsmoSDR block you can take advantage of a common software api in your application(s) independent of the underlying radio hardware. For installation and usage guidelines please read the documentation available at http://sdr.osmocom.org/trac/wiki/GrOsmoSDR For the impatient :) a short excerpt: The Gnu Radio block requires a recent gnuradio (>= v3.7) to be installed. Before building the block you have to make sure that all the dependencies (see list of supported devices above) you are intend to work with are properly installed. The build system of gr-osmosdr will recognize them and enable specific source/sink components thereafter. Please note: prior pulling a new version from git and compiling it, please do a "make uninstall" first to properly remove the previous version. Building with cmake: git clone git://git.osmocom.org/gr-osmosdr cd gr-osmosdr/ mkdir build cd build/ cmake ../ make sudo make install sudo ldconfig NOTE: The osmocom blocks will appear under 'Sources' and 'Sinks' categories in GRC menu.