Permalink
Switch branches/tags
Commits on Jan 8, 2011
  1. pcf50633: Set cell id to -1 if there is only one instance of the cell

    This ensures sysfs path backwards compatibility with older kernel versions
    larsclausen committed Jan 8, 2011
Commits on Jan 7, 2011
  1. Revert input version as tslib compiled against older

    We would need newer userspace, this is easier fix then recompiling
    all the packages.
    thertp committed with Jan 7, 2011
  2. Use 100 as HZ value on S3C24XX

    Explanation from Gennady Kupava:
    
    t does simple thing - change HZ value of linux kernel from 200HZ to
    100HZ. Main reason is performance.
    
    My rationale is following:
    Basically this mean that timer interrupts amount will be reduced from
    200 per second to 100 per second. This allows:
    
    Pros:
    1. Stay more in IDLE state. (less power consumption)
    2. If several tasks are active, do 2 times less context switches (and
    our context switches are expensive). Do not think it will be 'slow'.
    This is not applied to all tasks - but only to CPU bound ones.
    3. Less interrupts is good on it's own.
    
    Cons:
    1. Worse granilarity of delays and sheduled works. I think it's
    impossible
    2. May reveal some bugs, as any new non-trivial system-wide change.
    Basically it works here, but i didn't test everything.
    
    Other arguments:
    I checked other boards config files and it turned out that only few of
    them (10% or so) using 200 as HZ value.
    
    I did lmbenching and found that difference is few percent, but still
    noticeable.
    
    I can't 'feel' that something changed.
    
    So, this patch is just sets new value for HZ and changes s3c timer
    interrupt frequency.
    
    Big thanks to Vasily 'anarsoul' Khoruzhick for patch written on my
    request.
    
    Conflicts:
    
    	.config
    
    Conflicts:
    
    	.config
    	arch/arm/Kconfig
    anarsoul committed with Jan 7, 2011
  3. wm8753: use snd_soc_jack on neo1973

    Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
    starting
    larsclausen committed with Jan 7, 2011
  4. Force GPS power up on resume if it were powered up on suspend

    This is needed for proper GPS funciton with u-boot.
    
    u-boot needs to be patched with this patch:
    
    http://www.bsdmn.com/openmoko/gpsfix/uboot_do_not_touch_serials.patch
    
    Idea of above patch is to keep u-boot from controlling serial's GPIO
    configuration. It turned out that u-boot also touch GSM port
    configuration on resume. This turns this off.
    
    Whole thread can be found here:
    
    http://lists.openmoko.org/pipermail/openmoko-kernel/2010-November/011274.html
    gena2x committed with Jan 7, 2011
  5. s3c2410_ts: jitter less touchscreen for glamo, version 4

    Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
    gena2x committed with Jan 7, 2011
  6. Rename /dev/s3c2410_serialXXX to /dev/ttySACXXX

    It's nice that devtmpfs now creates the serial port with well known
    name.
    
    http://docs.openmoko.org/trac/ticket/2338
    committed Sep 21, 2010
  7. tslib relies on ts pressures events so this hack is needed to get tsl…

    …ib stuff
    
    working
    thertp committed with Aug 17, 2010
  8. ar6000_delay.patch

    patch from https://docs.openmoko.org/trac/ticket/2327 - wifi is working good
    (100% until now) for me with this patch.
    
    Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
    committed Apr 9, 2010
  9. usbhost.patch

    adds support for usb host mode and adds usb host pm sysfs node. I just
    copied and modified how modem is powered up and backported changes in
    ohci-s3c2410.c. No idea if this is the right approach, but it works -
    my usb keyboard is now working after:
    
    echo 1 > /sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/pcf50633-gpio/reg-fixed-voltage.2/gta02-pm-usbhost.0/power_on
    echo host > /sys/devices/platform/s3c2410-ohci/usb_mode
    
    Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
    committed Jan 7, 2011
  10. touchscreen: ignore unexpected interrupts

    Conflicts:
    
    	drivers/input/touchscreen/s3c2410_ts.c
    gena2x committed with Jan 7, 2011
  11. wm8753: fix build with gcc-4.4.2, which works ok with 4.1.2

    Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
    shr-project committed with Nov 7, 2009
Commits on Jan 6, 2011
  1. Merge branches 'gta01-machine-2.6.37', 'jbt6k74-2.6.37', 'wm8753-2.6.…

    …37', 'om-s3c-2.6.37' and 'pcf50606-2.6.37' into om-gta01-2.6.37
    larsclausen committed Jan 6, 2011
  2. gta01: Add default config

    larsclausen committed Oct 17, 2009
  3. gta01: reenable TS driver

    Signed-off-by: Paul Fertser <fercerpav@gmail.com>
    paulfertser committed with larsclausen Nov 17, 2010
  4. Add gta01 machine support.

    larsclausen committed Oct 17, 2009
  5. Inital pcf50606 support

    larsclausen committed Oct 16, 2009
Commits on Jan 5, 2011
  1. POWER: bq27x00: Add external_power_changed callback

    When the external power changes we should reread the battery registers to see if
    anything has changed.
    
    Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
    larsclausen committed Jan 5, 2011