defconfig

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_ARCH_FPU is not set
# CONFIG_ARCH_LEDS is not set
# CONFIG_DEV_CONSOLE is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_SERIAL is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="boards/arm/stm32/nucleo-f302r8/"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="nucleo-f302r8"
CONFIG_ARCH_BOARD_NUCLEO_F302R8=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F302R8=y
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_BOARD_LATE_INITIALIZE=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_CAN_TXFIFOSIZE=16
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEFAULT_TASK_STACKSIZE=512
CONFIG_DEV_NULL=y
CONFIG_IDLETHREAD_STACKSIZE=512
CONFIG_INIT_ENTRYPOINT="cannode_main"
CONFIG_INPUT=y
CONFIG_INPUT_BUTTONS=y
CONFIG_INPUT_BUTTONS_DEBOUNCE_DELAY=10
CONFIG_INPUT_BUTTONS_LOWER=y
CONFIG_INTELHEX_BINARY=y
CONFIG_LTO_FULL=y
CONFIG_NAME_MAX=0
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=6
CONFIG_PATH_MAX=32
CONFIG_PID_INITIAL_COUNT=6
CONFIG_RAILAB_MINIMAL_CANNODE=y
CONFIG_RAILAB_MINIMAL_CANNODE_CHARDEV=y
CONFIG_RAM_SIZE=16386
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_SIG_ALLOC_ACTIONS=0
CONFIG_SIG_PREALLOC_ACTIONS=0
CONFIG_SIG_PREALLOC_IRQ_ACTIONS=0
CONFIG_START_DAY=6
CONFIG_START_MONTH=12
CONFIG_START_YEAR=2011
CONFIG_STM32_CAN1=y
CONFIG_STM32_CAN_TSEG1=15
CONFIG_STM32_CAN_TSEG2=2
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_SYSTEM_TIME64=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_USERLED=y
CONFIG_USERLED_LOWER=y