Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Newer
Older
100644 103 lines (68 sloc) 2.886 kB
ee9a0c3 @rallegade first commit
authored
1 Writing Device Drivers for Zorro Devices
2 ----------------------------------------
3
4 Written by Geert Uytterhoeven <geert@linux-m68k.org>
5 Last revised: September 5, 2003
6
7
8 1. Introduction
9 ---------------
10
11 The Zorro bus is the bus used in the Amiga family of computers. Thanks to
12 AutoConfig(tm), it's 100% Plug-and-Play.
13
14 There are two types of Zorro busses, Zorro II and Zorro III:
15
16 - The Zorro II address space is 24-bit and lies within the first 16 MB of the
17 Amiga's address map.
18
19 - Zorro III is a 32-bit extension of Zorro II, which is backwards compatible
20 with Zorro II. The Zorro III address space lies outside the first 16 MB.
21
22
23 2. Probing for Zorro Devices
24 ----------------------------
25
26 Zorro devices are found by calling `zorro_find_device()', which returns a
27 pointer to the `next' Zorro device with the specified Zorro ID. A probe loop
28 for the board with Zorro ID `ZORRO_PROD_xxx' looks like:
29
30 struct zorro_dev *z = NULL;
31
32 while ((z = zorro_find_device(ZORRO_PROD_xxx, z))) {
33 if (!zorro_request_region(z->resource.start+MY_START, MY_SIZE,
34 "My explanation"))
35 ...
36 }
37
38 `ZORRO_WILDCARD' acts as a wildcard and finds any Zorro device. If your driver
39 supports different types of boards, you can use a construct like:
40
41 struct zorro_dev *z = NULL;
42
43 while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
44 if (z->id != ZORRO_PROD_xxx1 && z->id != ZORRO_PROD_xxx2 && ...)
45 continue;
46 if (!zorro_request_region(z->resource.start+MY_START, MY_SIZE,
47 "My explanation"))
48 ...
49 }
50
51
52 3. Zorro Resources
53 ------------------
54
55 Before you can access a Zorro device's registers, you have to make sure it's
56 not yet in use. This is done using the I/O memory space resource management
57 functions:
58
59 request_mem_region()
60 release_mem_region()
61
62 Shortcuts to claim the whole device's address space are provided as well:
63
64 zorro_request_device
65 zorro_release_device
66
67
68 4. Accessing the Zorro Address Space
69 ------------------------------------
70
71 The address regions in the Zorro device resources are Zorro bus address
72 regions. Due to the identity bus-physical address mapping on the Zorro bus,
73 they are CPU physical addresses as well.
74
75 The treatment of these regions depends on the type of Zorro space:
76
77 - Zorro II address space is always mapped and does not have to be mapped
78 explicitly using z_ioremap().
79
80 Conversion from bus/physical Zorro II addresses to kernel virtual addresses
81 and vice versa is done using:
82
83 virt_addr = ZTWO_VADDR(bus_addr);
84 bus_addr = ZTWO_PADDR(virt_addr);
85
86 - Zorro III address space must be mapped explicitly using z_ioremap() first
87 before it can be accessed:
88
89 virt_addr = z_ioremap(bus_addr, size);
90 ...
91 z_iounmap(virt_addr);
92
93
94 5. References
95 -------------
96
97 linux/include/linux/zorro.h
98 linux/include/asm-{m68k,ppc}/zorro.h
99 linux/include/linux/zorro_ids.h
100 linux/drivers/zorro
101 /proc/bus/zorro
102
Something went wrong with that request. Please try again.