diff --git a/.trunk/.gitignore b/.trunk/.gitignore
new file mode 100644
index 0000000..15966d0
--- /dev/null
+++ b/.trunk/.gitignore
@@ -0,0 +1,9 @@
+*out
+*logs
+*actions
+*notifications
+*tools
+plugins
+user_trunk.yaml
+user.yaml
+tmp
diff --git a/.trunk/configs/.markdownlint.yaml b/.trunk/configs/.markdownlint.yaml
new file mode 100644
index 0000000..b40ee9d
--- /dev/null
+++ b/.trunk/configs/.markdownlint.yaml
@@ -0,0 +1,2 @@
+# Prettier friendly markdownlint config (all formatting rules disabled)
+extends: markdownlint/style/prettier
diff --git a/.trunk/trunk.yaml b/.trunk/trunk.yaml
new file mode 100644
index 0000000..27f38ff
--- /dev/null
+++ b/.trunk/trunk.yaml
@@ -0,0 +1,23 @@
+# This file controls the behavior of Trunk: https://docs.trunk.io/cli
+# To learn more about the format of this file, see https://docs.trunk.io/reference/trunk-yaml
+version: 0.1
+cli:
+  version: 1.22.0
+# Trunk provides extensibility via plugins. (https://docs.trunk.io/plugins)
+plugins:
+  sources:
+    - id: trunk
+      ref: v1.5.0
+      uri: https://github.com/trunk-io/plugins
+# Many linters and tools depend on runtimes - configure them here. (https://docs.trunk.io/runtimes)
+runtimes:
+  enabled:
+    - node@18.12.1
+    - python@3.10.8
+# This is the section where you manage your linters. (https://docs.trunk.io/check/configuration)
+lint:
+  enabled:
+    - git-diff-check
+    - markdownlint@0.39.0
+    - prettier@3.2.5
+    - trufflehog@3.74.0
diff --git a/t14/configuration.nix b/t14/configuration.nix
new file mode 100644
index 0000000..9458f58
--- /dev/null
+++ b/t14/configuration.nix
@@ -0,0 +1,308 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+# sudo nixos-rebuild switch
+# nix-shell -p vim
+
+{ config, pkgs, ... }:
+
+# https://nixos.wiki/wiki/FAQ#How_can_I_install_a_package_from_unstable_while_remaining_on_the_stable_channel.3F
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+      <home-manager/nixos>
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  # https://nixos.wiki/wiki/Networking
+  networking.hostName = "t14"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  networking.hosts = {
+    "172.16.50.216" = ["hp0"];
+    "172.16.40.35" = ["hp1"];
+    "172.16.40.71" = ["hp2"];
+  };
+
+  # Set your time zone.
+  time.timeZone = "America/Los_Angeles";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+
+  # Enable the GNOME Desktop Environment.
+  services.xserver.displayManager.gdm.enable = true;
+  services.xserver.desktopManager.gnome.enable = true;
+
+  # Configure keymap in X11
+  services.xserver = {
+    layout = "us";
+    xkbVariant = "";
+  };
+
+  # Enable CUPS to print documents.
+  services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  sound.enable = true;
+  hardware.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.das = {
+    isNormalUser = true;
+    description = "das";
+    extraGroups = [ "wheel" "networkmanager" "libvirtd" ];
+    packages = with pkgs; [
+    ];
+    # https://nixos.wiki/wiki/SSH_public_key_authentication
+    openssh.authorizedKeys.keys = [
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGMCFUMSCFJX95eLfm7P9r72NBp9I1FiXwNwJ+x/HGPV das@t"
+    ];
+  };
+
+  # https://nix-community.github.io/home-manager/index.xhtml#ch-installation
+  users.users.eve.isNormalUser = true; 
+  home-manager.users.das = { pkgs, ... }: {
+    home.packages = with pkgs; [ 
+      # terminals
+      gnome.gnome-terminal
+      alacritty
+      #warp-terminal
+      #
+      tmux
+      screen
+      #
+      perl
+      python3
+      #
+      gawk
+      jq
+      git
+      htop
+      minicom
+      #
+      firefox
+      brave
+      google-chrome
+      slack
+      #
+      meld
+      gedit
+      trunk-io
+      flameshot
+      #
+      iproute2
+      vlan
+      tcpdump
+      wireshark
+      flent
+      iperf2
+      bpftools
+      #
+      gnuradio
+      #
+      vlc
+      # go
+      # https://nixos.wiki/wiki/Go
+      # https://nixos.org/manual/nixpkgs/stable/#sec-language-go
+      # https://nixos.wiki/wiki/FAQ#How_can_I_install_a_package_from_unstable_while_remaining_on_the_stable_channel.3F 
+      libcap
+      gcc
+      #  thunderbird
+      go
+      # rust
+      # https://nixos.wiki/wiki/Rust
+      pkgs.cargo
+      pkgs.rustc
+      #
+      flutter
+      android-studio
+      android-tools
+      android-udev-rules
+      #
+      libreoffice-qt
+      hunspell
+      hunspellDicts.en_AU
+      #hunspellDicts.en_US
+      gnomeExtensions.system-monitor
+    ];
+
+    # vscode
+    # https://nixos.wiki/wiki/Visual_Studio_Code
+    programs.vscode = {
+      enable = true;
+      package = pkgs.vscode;
+      extensions = with pkgs.vscode-extensions; [
+        bbenoist.nix
+        dart-code.dart-code
+        dart-code.flutter
+        golang.go
+        hashicorp.terraform
+        #k6.k6
+        ms-azuretools.vscode-docker
+        ms-vscode-remote.remote-containers
+        ms-vscode-remote.remote-ssh
+        #ms-vscode-remote.remote-ssh-edit
+        ms-vscode.cmake-tools
+        ms-vscode.cpptools
+        #ms-vscode.cpptools-extension-pack
+        #ms-vscode.cpptools-themes
+        ms-vscode.hexeditor
+        ms-vscode.makefile-tools
+        ms-python.python
+        ms-python.vscode-pylance
+        #ms-vscode.remote-explorer
+        #ms-vscode.remote-repositories
+        #ms-vscode.remote-server
+        redhat.vscode-yaml
+        rust-lang.rust-analyzer
+        serayuzgur.crates
+        tamasfe.even-better-toml
+        timonwong.shellcheck
+        #trunk.io
+        zxh404.vscode-proto3
+        yzhang.markdown-all-in-one
+        #platformio.platformio-ide
+        github.copilot
+        # nix
+        #brettm12345.nixfmt.vscode
+        jnoortheen.nix-ide
+        #jeff-hykin.better-nix-syntax
+      ];
+    };
+    programs.bash.enable = true;
+    home.stateVersion = "23.11";
+    # https://nixos.wiki/wiki/GNOME
+    dconf = {
+      enable = true;
+      settings = {
+        "org/gnome/desktop/interface".color-scheme = "prefer-dark";
+        "org/virt-manager/virt-manager/connections" = {
+           autoconnect = ["qemu:///system"];
+           uris = ["qemu:///system"];
+        };
+      };
+    };
+    programs.vim = { 
+      enable = true;
+      plugins = with pkgs.vimPlugins; [ vim-airline ];
+      settings = { ignorecase = true; };
+      extraConfig = ''
+        set mouse=a
+      '';
+    }; 
+    #ldflags = [
+    #  "-X main.Version=${version}"
+    #  "-X main.Commit=${version}"
+    #];
+
+    programs.git = {
+      enable = true;
+      userEmail = "dave.seddon.ca@gmail.com";
+      userName = "randomizedcoder ";
+      #signing.key = "GPG-KEY-ID";
+      #signing.signByDefault = true;
+    };
+    nixpkgs.config.allowUnfree = true;
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+  #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #  wget
+    vim
+    curl
+    wget
+    tcpdump
+    iproute2
+    pciutils
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+  programs.gnupg.agent = {
+     enable = true;
+     enableSSHSupport = true;
+  };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  # services.openssh.enable = true;
+  services.openssh.enable = true;
+
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "23.11"; # Did you read the comment?
+
+  virtualisation.libvirtd.enable = true;
+  programs.virt-manager.enable = true;
+  # services.qemuGuest.enable = true;
+
+  # https://wiki.nixos.org/wiki/Laptop
+
+}
diff --git a/t14/hardware-configuration.nix b/t14/hardware-configuration.nix
new file mode 100644
index 0000000..f2b5bcc
--- /dev/null
+++ b/t14/hardware-configuration.nix
@@ -0,0 +1,41 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "nvme" "ehci_pci" "xhci_pci" "usb_storage" "sd_mod" "rtsx_pci_sdmmc" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/adb8ae55-949c-44b3-8abe-7584d2194c17";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/A1E4-3942";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/1a243657-4913-4220-94da-7ef97d4c7966"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp2s0f0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp3s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}