/dev/serial0 missing

Upgrading to the latest firmware 6.12.20+rpt-rpi-v8 has broken
/dev/serial0 -> ttyAMA0

The udev rule 60-serial.rules (which is where I assume it is set) is unchanged.

Can you provide more details please? What model of Raspberry Pi are you using? Which version of Raspberry Pi OS are you using? What does your /boot/firmware/config.txt (and also /boot/firmware/cmdline.txt) say?

Pi4, Pi3B+, Pi2 Bookworm 12.10 64 bit, except Pi2
Serial is enabled in /boot/firmware/config.txt.
Several others have reported the same on different Pi.

I ran it to a similar issue a while back. See raspberrypi/linux#5566

I have the same issue on my Pi3+, after latest apt upgrade there is no /dev/serial0 any longer.
This broke the usage of my raspbee serial device with deconz.
I needed to add dtoverlay=disable-bt in /boot/firmware/config.txt to get deconz working again.

I have the same issue on my Pi3+, after latest apt upgrade there is no /dev/serial0 any longer.
Serial is enabled in /boot/firmware/config.txt.
Upgade have about 200 packeges, but only update from:
linux-headers-rpi-2712 linux-headers-rpi-v8 linux-image-rpi-2712 linux-image-rpi-v8 linux-libc-dev
will /dev/serial0 brocken.
As workaround:
sudo apt-mark hold linux-headers-rpi-2712 linux-headers-rpi-v8 linux-image-rpi-2712 linux-image-rpi-v8 linux-libc-dev

another solution:
by dtoverlay=pi3-disable-bt in config.txt
KERNEL=="ttyAMA0", SYMLINK:="serial0" in /lib/udev/rules.d/100-serial.rules

I've submitted a workaround here, tested on Pi3, Pi4, Pi5. It will probably get updated if we can find a better strategy for mapping ttys to of_nodes or minimal kernel patch but I think "this will do" for now

RPi-Distro/raspberrypi-sys-mods@fd91c42

I have removed my 100-serials.rules and changed 99-comm.rules with only 1 Line (I have Pi3):
TTYNODE=$$(readlink /sys/class/tty/%k/device | sed 's/.\//\/soc\/serial@/' | sed 's/\..//' | sed 's/@f/@7/' );
maked reboot and my /dev/serial0 did'nt exit again!
I have: 6.12.20+rpt-rpi-v8
What made i wrong?

@Milliways2

@Milliways2 This should now be fixed in the latest apt upgrade - can you confirm?
(see RPi-Distro/raspberrypi-sys-mods#95 and RPi-Distro/raspberrypi-sys-mods#97 if you're curious about the technical details)

I maked upgrade, in config.txt: uart_enabled=1

After reboot i don't have serial0!

This is result from sudo udevadm test /dev/ttyS0

This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

Trying to open "/etc/systemd/hwdb/hwdb.bin"...
Trying to open "/etc/udev/hwdb.bin"...
Trying to open "/usr/lib/systemd/hwdb/hwdb.bin"...
Trying to open "/lib/systemd/hwdb/hwdb.bin"...
Trying to open "/lib/udev/hwdb.bin"...
=== trie on-disk ===
tool version:          252
file size:        13265043 bytes
header size             80 bytes
strings            2697571 bytes
nodes             10567392 bytes
Loading kernel module index.
Found cgroup2 on /sys/fs/cgroup/, full unified hierarchy
Found container virtualization none.
Using default interface naming scheme 'v252'.
Skipping overridden file '/usr/lib/systemd/network/99-default.link'.
Skipping overridden file '/usr/lib/systemd/network/73-usb-net-by-mac.link'.
Skipping empty file: /etc/systemd/network/99-default.link
Skipping empty file: /etc/systemd/network/73-usb-net-by-mac.link
Created link configuration context.
Reading rules file: /usr/lib/udev/rules.d/10-vc.rules
Reading rules file: /usr/lib/udev/rules.d/15-i2c-modprobe.rules
Reading rules file: /usr/lib/udev/rules.d/40-usb_modeswitch.rules
Reading rules file: /usr/lib/udev/rules.d/50-firmware.rules
Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
Reading rules file: /usr/lib/udev/rules.d/55-dm.rules
Reading rules file: /usr/lib/udev/rules.d/56-hpmud.rules
Reading rules file: /usr/lib/udev/rules.d/60-autosuspend.rules
Reading rules file: /usr/lib/udev/rules.d/60-backlight.rules
Reading rules file: /usr/lib/udev/rules.d/60-block.rules
Reading rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
Reading rules file: /usr/lib/udev/rules.d/60-dma-heap.rules
Reading rules file: /usr/lib/udev/rules.d/60-drm.rules
Reading rules file: /usr/lib/udev/rules.d/60-evdev.rules
Reading rules file: /usr/lib/udev/rules.d/60-ffado.rules
Reading rules file: /usr/lib/udev/rules.d/60-fido-id.rules
Reading rules file: /usr/lib/udev/rules.d/60-flashrom.rules
Reading rules file: /usr/lib/udev/rules.d/60-gpiochip4.rules
Reading rules file: /usr/lib/udev/rules.d/60-i2c-aliases.rules
Reading rules file: /usr/lib/udev/rules.d/60-i2c-tools.rules
Reading rules file: /usr/lib/udev/rules.d/60-infiniband.rules
Reading rules file: /usr/lib/udev/rules.d/60-input-id.rules
Reading rules file: /usr/lib/udev/rules.d/60-libgphoto2-6.rules
Reading rules file: /usr/lib/udev/rules.d/60-libopenni2-0.rules
Reading rules file: /usr/lib/udev/rules.d/60-libsane1.rules
Reading rules file: /usr/lib/udev/rules.d/60-ondemand-governor.rules
Reading rules file: /usr/lib/udev/rules.d/60-openocd.rules
Reading rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
Reading rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage-dm.rules
Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
Reading rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
Reading rules file: /usr/lib/udev/rules.d/60-pico.rules
Reading rules file: /usr/lib/udev/rules.d/60-piolib.rules
Reading rules file: /usr/lib/udev/rules.d/60-sensor.rules
Reading rules file: /usr/lib/udev/rules.d/60-serial.rules
Reading rules file: /usr/lib/udev/rules.d/60-triggerhappy.rules
Reading rules file: /usr/lib/udev/rules.d/61-drm.rules
Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
Reading rules file: /usr/lib/udev/rules.d/64-xorg-xkb.rules
Reading rules file: /usr/lib/udev/rules.d/65-libwacom.rules
Reading rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
Reading rules file: /usr/lib/udev/rules.d/69-libmtp.rules
Reading rules file: /usr/lib/udev/rules.d/70-camera.rules
Reading rules file: /usr/lib/udev/rules.d/70-joystick.rules
Reading rules file: /usr/lib/udev/rules.d/70-memory.rules
Reading rules file: /usr/lib/udev/rules.d/70-microbit.rules
Reading rules file: /usr/lib/udev/rules.d/70-mouse.rules
Reading rules file: /usr/lib/udev/rules.d/70-power-switch.rules
Reading rules file: /usr/lib/udev/rules.d/70-printers.rules
Reading rules file: /usr/lib/udev/rules.d/70-touchpad.rules
Reading rules file: /usr/lib/udev/rules.d/70-uaccess.rules
Reading rules file: /usr/lib/udev/rules.d/71-ipp-usb.rules
Reading rules file: /usr/lib/udev/rules.d/71-seat.rules
Reading rules file: /usr/lib/udev/rules.d/73-seat-late.rules
Reading rules file: /usr/lib/udev/rules.d/73-special-net-names.rules
Reading rules file: /usr/lib/udev/rules.d/75-net-description.rules
Reading rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-broadmobi-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-cinterion-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-dell-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-dlink-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-ericsson-mbm.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-fibocom-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-foxconn-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-gosuncn-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-haier-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-huawei-net-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-linktop-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-longcheer-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-mtk-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-nokia-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-qcom-soc.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-qdl-device-blacklist.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-quectel-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-sierra.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-simtech-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-telit-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-tplink-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-ublox-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-x22x-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/77-mm-zte-port-types.rules
Reading rules file: /usr/lib/udev/rules.d/78-sound-card.rules
Reading rules file: /usr/lib/udev/rules.d/80-debian-compat.rules
Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
Reading rules file: /usr/lib/udev/rules.d/80-libinput-device-groups.rules
Reading rules file: /usr/lib/udev/rules.d/80-mm-candidate.rules
Reading rules file: /usr/lib/udev/rules.d/80-net-setup-link.rules
Reading rules file: /usr/lib/udev/rules.d/80-noobs.rules
Reading rules file: /usr/lib/udev/rules.d/80-udisks2.rules
Reading rules file: /usr/lib/udev/rules.d/81-net-dhcp.rules
Reading rules file: /usr/lib/udev/rules.d/84-nm-drivers.rules
Reading rules file: /usr/lib/udev/rules.d/85-hwclock.rules
Reading rules file: /usr/lib/udev/rules.d/85-nm-unmanaged.rules
Reading rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
Reading rules file: /usr/lib/udev/rules.d/90-console-setup.rules
Reading rules file: /usr/lib/udev/rules.d/90-feedbackd.rules
Reading rules file: /usr/lib/udev/rules.d/90-libinput-fuzz-override.rules
Reading rules file: /usr/lib/udev/rules.d/90-nm-thunderbolt.rules
Reading rules file: /usr/lib/udev/rules.d/90-pi-bluetooth.rules
Reading rules file: /usr/lib/udev/rules.d/90-pipewire-alsa.rules
Reading rules file: /usr/lib/udev/rules.d/90-pulseaudio.rules
Reading rules file: /usr/lib/udev/rules.d/91-pulseaudio-rpi.rules
Reading rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
Reading rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
Reading rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
Reading rules file: /usr/lib/udev/rules.d/96-e2scrub.rules
Reading rules file: /usr/lib/udev/rules.d/97-hid2hci.rules
Reading rules file: /etc/udev/rules.d/99-com.rules
Reading rules file: /usr/lib/udev/rules.d/99-libsane1.rules
Reading rules file: /usr/lib/udev/rules.d/99-nfs.rules
Reading rules file: /usr/lib/udev/rules.d/99-systemd.rules
ttyS0: /usr/lib/udev/rules.d/50-udev-default.rules:40 GROUP 20
ttyS0: /etc/udev/rules.d/99-com.rules:40 Running PROGRAM '/bin/sh -c 'ALIASES=/proc/device-tree/aliases; TTYNODE=$(readlink /sys/class/tty/ttyS0/device | sed 's/.*\\//\\/soc\\/serial@/' | sed 's/\\..*//' | sed 's/@f/@7/' | sed 's/@3f/@fe/' ); if [ -e $ALIASES/console ]; then if [ $TTYNODE = $(strings $ALIASES/console) ]; then echo 0; elif [ -e $ALIASES/bluetooth ] && [ $TTYNODE/bluetooth = $(strings $ALIASES/bluetooth) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; else exit 1; fi elif [ $TTYNODE = $(strings $ALIASES/serial0) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/serial1) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/uart0 | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/uart10 | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; else exit 1; fi ''
ttyS0: Starting '/bin/sh -c 'ALIASES=/proc/device-tree/aliases; TTYNODE=$(readlink /sys/class/tty/ttyS0/device | sed 's/.*\\//\\/soc\\/serial@/' | sed 's/\\..*//' | sed 's/@f/@7/' | sed 's/@3f/@fe/' ); if [ -e $ALIASES/console ]; then if [ $TTYNODE = $(strings $ALIASES/console) ]; then echo 0; elif [ -e $ALIASES/bluetooth ] && [ $TTYNODE/bluetooth = $(strings $ALIASES/bluetooth) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; else exit 1; fi elif [ $TTYNODE = $(strings $ALIASES/serial0) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/serial1) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/uart0 | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/uart10 | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; else exit 1; fi ''
Successfully forked off '(spawn)' as PID 1718.
ttyS0: '/bin/sh -c 'ALIASES=/proc/device-tree/aliases; TTYNODE=$(readlink /sys/class/tty/ttyS0/device | sed 's/.*\\//\\/soc\\/serial@/' | sed 's/\\..*//' | sed 's/@f/@7/' | sed 's/@3f/@fe/' ); if [ -e $ALIASES/console ]; then if [ $TTYNODE = $(strings $ALIASES/console) ]; then echo 0; elif [ -e $ALIASES/bluetooth ] && [ $TTYNODE/bluetooth = $(strings $ALIASES/bluetooth) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; else exit 1; fi elif [ $TTYNODE = $(strings $ALIASES/serial0) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/serial1) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/uart0 | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/uart10 | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; else exit 1; fi ''(err) 'strings: '/proc/device-tree/aliases/uart10': No such file'
ttyS0: '/bin/sh -c 'ALIASES=/proc/device-tree/aliases; TTYNODE=$(readlink /sys/class/tty/ttyS0/device | sed 's/.*\\//\\/soc\\/serial@/' | sed 's/\\..*//' | sed 's/@f/@7/' | sed 's/@3f/@fe/' ); if [ -e $ALIASES/console ]; then if [ $TTYNODE = $(strings $ALIASES/console) ]; then echo 0; elif [ -e $ALIASES/bluetooth ] && [ $TTYNODE/bluetooth = $(strings $ALIASES/bluetooth) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; else exit 1; fi elif [ $TTYNODE = $(strings $ALIASES/serial0) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/serial1) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/uart0 | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/uart10 | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; else exit 1; fi ''(err) '/bin/sh: 1: [: =: argument expected'
ttyS0: Process '/bin/sh -c 'ALIASES=/proc/device-tree/aliases; TTYNODE=$(readlink /sys/class/tty/ttyS0/device | sed 's/.*\\//\\/soc\\/serial@/' | sed 's/\\..*//' | sed 's/@f/@7/' | sed 's/@3f/@fe/' ); if [ -e $ALIASES/console ]; then if [ $TTYNODE = $(strings $ALIASES/console) ]; then echo 0; elif [ -e $ALIASES/bluetooth ] && [ $TTYNODE/bluetooth = $(strings $ALIASES/bluetooth) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; else exit 1; fi elif [ $TTYNODE = $(strings $ALIASES/serial0) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/serial1) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/uart0 | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/uart10 | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; else exit 1; fi '' failed with exit code 1.
ttyS0: /etc/udev/rules.d/99-com.rules:40 Command "/bin/sh -c 'ALIASES=/proc/device-tree/aliases; TTYNODE=$(readlink /sys/class/tty/ttyS0/device | sed 's/.*\\//\\/soc\\/serial@/' | sed 's/\\..*//' | sed 's/@f/@7/' | sed 's/@3f/@fe/' ); if [ -e $ALIASES/console ]; then if [ $TTYNODE = $(strings $ALIASES/console) ]; then echo 0; elif [ -e $ALIASES/bluetooth ] && [ $TTYNODE/bluetooth = $(strings $ALIASES/bluetooth) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/console | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; else exit 1; fi elif [ $TTYNODE = $(strings $ALIASES/serial0) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/serial1) ]; then echo 1; elif [ $TTYNODE = $(strings $ALIASES/uart0 | sed 's/.*rp1\\/serial@/\\/soc\\/serial@1f000/' ) ]; then echo 0; elif [ $TTYNODE = $(strings $ALIASES/uart10 | sed 's/.*\\//\\/soc\\//' | sed 's/serial@/serial@10/' ) ]; then echo 0; else exit 1; fi '" returned 1 (error)
ttyS0: Preserve permissions of /dev/ttyS0, uid=0, gid=20, mode=0660
ttyS0: Successfully created symlink '/dev/char/4:64' to '/dev/ttyS0'
ttyS0: sd-device: Created db file '/run/udev/data/c4:64' for '/devices/platform/soc/3f215040.serial/3f215040.serial:0/3f215040.serial:0.0/tty/ttyS0'
DEVPATH=/devices/platform/soc/3f215040.serial/3f215040.serial:0/3f215040.serial:0.0/tty/ttyS0
DEVNAME=/dev/ttyS0
MAJOR=4
MINOR=64
ACTION=add
SUBSYSTEM=tty
TAGS=:systemd:
ID_MM_CANDIDATE=1
CURRENT_TAGS=:systemd:
USEC_INITIALIZED=6941106
Unload kernel module index.
Unloaded link configuration context.
jpospelow@firestar-mock:~ $ ls -l /dev/serial0
ls: Zugriff auf '/dev/serial0' nicht möglich: Datei oder Verzeichnis nicht gefunden

Can confirm, that this also isn't working correctly for me on a Pi 3B+. Thanks for the report. Investigating...

@JuriPospelow

@JuriPospelow I believe that I've got a fix in RPi-Distro/raspberrypi-sys-mods#98 - would you like to test please?

Yes, it work. I have Pi3B+ and tested serial0 to ttyS0, to ttyAMA0 and udevadmtest - all without errors.

Closing, as the updated raspberrypi-sys-mods package has now been shipped in APT.

Navigation Menu

/dev/serial0 missing #401

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

/dev/serial0 missing #401

Description

Activity

lurch commented on Apr 3, 2025

Milliways2 commented on Apr 3, 2025

JinShil commented on Apr 3, 2025

hobbydevdude commented on Apr 4, 2025

JuriPospelow commented on Apr 10, 2025

JuriPospelow commented on Apr 10, 2025

timg236 commented on Apr 10, 2025

JuriPospelow commented on Apr 12, 2025

lurch commented on Apr 14, 2025

JuriPospelow commented on Apr 14, 2025

lurch commented on Apr 15, 2025

lurch commented on Apr 16, 2025

JuriPospelow commented on Apr 19, 2025

lurch commented on Apr 23, 2025

Metadata

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Issue actions