diff --git a/documentation/asciidoc/accessories/iqaudio/dac_plus.adoc b/documentation/asciidoc/accessories/iqaudio/dac_plus.adoc
index a43b4e429..1d4324f10 100644
--- a/documentation/asciidoc/accessories/iqaudio/dac_plus.adoc
+++ b/documentation/asciidoc/accessories/iqaudio/dac_plus.adoc
@@ -1,15 +1,15 @@
 === Raspberry Pi DAC{plus}
 
-Raspberry Pi DAC{plus} is a high-resolution audio output HAT that provides 24 bit 192 kHz digital audio output.
+Raspberry Pi DAC{plus} is a high-resolution audio output HAT that provides 24-bit 192kHz digital audio output.
 
 image::images/DAC+_Board_Diagram.jpg[width="80%"]
 
-A Texas Instruments PCM5122 is used in the DAC{plus} in order to deliver analogue audio to the Phono connectors of the device. It also supports a dedicated headphone amplifier and is powered by the Raspberry Pi through the GPIO header.
+A Texas Instruments PCM5122 is used in the DAC{plus} to deliver analogue audio to the phono connectors of the device. It also supports a dedicated headphone amplifier and is powered via the Raspberry Pi through the GPIO header.
 
 ==== Pinouts
 [cols="1,12"]
 |===
-| *P1* | Analogue out (0..2V RMS), carries GPIO27, MUTE signal (headphone detect), Left and Right
-Audio and Left and Right Ground.
+| *P1* | Analogue out (0-2V RMS), carries GPIO27, MUTE signal (headphone detect), left and right
+audio and left and right ground.
 | *P6* | Headphone socket signals (pin1: LEFT, 2:GROUND, 3: RIGHT, 4:GROUND, 5:DETECT).
 |===