From ef7c62900f4dc7b89ca0a7c751e3955b94ab1fab Mon Sep 17 00:00:00 2001 From: James Hughes Date: Mon, 14 Apr 2025 15:26:27 +0100 Subject: [PATCH 1/2] Update overclocking.adoc (#4071) * Update overclocking.adoc * Update overclocking.adoc --- documentation/asciidoc/computers/config_txt/overclocking.adoc | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/documentation/asciidoc/computers/config_txt/overclocking.adoc b/documentation/asciidoc/computers/config_txt/overclocking.adoc index 7eeefb8e1..b76a8ac8a 100644 --- a/documentation/asciidoc/computers/config_txt/overclocking.adoc +++ b/documentation/asciidoc/computers/config_txt/overclocking.adoc @@ -101,6 +101,10 @@ WARNING: Setting any overclocking parameters to values other than those used by | temp_soft_limit | *3A+/3B+ only*. CPU speed throttle control. This sets the temperature at which the CPU clock speed throttling system activates. At this temperature, the clock speed is reduced from 1400MHz to 1200MHz. Defaults to `60`, can be raised to a maximum of `70`, but this may cause instability. + +| core_freq_fixed +| Setting to 1 disables active scaling of the core clock frequency and ensures that any peripherals that use the core clock will maintain a consistent speed. The fixed clock speed is the higher/turbo frequency for the platform in use. Use this in preference to setting specific core_clock frequencies as it provides portability of config files between platforms. + |=== This table gives the default values for the options on various Raspberry Pi models, all frequencies are stated in MHz. From 924e8ac9c21e69bdf4673a63b671d0f33d6d3d8f Mon Sep 17 00:00:00 2001 From: Chris Lowder Date: Tue, 22 Apr 2025 14:29:28 +0100 Subject: [PATCH 2/2] Update Connect troubleshooting guide Note that upgrading Connect with Connect isn't supported and update console output to reflect changes in v2.5. --- .../asciidoc/services/connect/troubleshooting.adoc | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/documentation/asciidoc/services/connect/troubleshooting.adoc b/documentation/asciidoc/services/connect/troubleshooting.adoc index 16b9268c6..23ae5d491 100644 --- a/documentation/asciidoc/services/connect/troubleshooting.adoc +++ b/documentation/asciidoc/services/connect/troubleshooting.adoc @@ -10,6 +10,8 @@ * Browsers intercept certain keys and key combinations. As a result, you can't type these keys into your Connect window. Screen sharing includes a toolbar to simulate some of the most popular intercepted keys. +* Upgrading `rpi-connect` and `rpi-connect-lite` using Connect is not supported. The upgrade process will terminate all remote shell sessions and drop all connections. + * To upgrade from version 1 to version 2, you must first upgrade the package you currently have installed before switching between `rpi-connect` and `rpi-connect-lite`. This ensures that Connect's services properly migrate to the version 2 format. If you currently have `rpi-connect` installed, run the following command: + [source,console] @@ -50,6 +52,7 @@ If all is well, you should see output similar to the following: Screen sharing is supported by this version of rpi-connect ✓ Wayland compositor available ✓ Screen sharing services enabled and active +✓ Communication with Raspberry Pi Connect WebSocket server ✓ Communication with Raspberry Pi Connect API ✓ Authentication with Raspberry Pi Connect API ✓ Peer-to-peer connection candidate via STUN @@ -62,6 +65,7 @@ If there is an issue, you will see something like so: Screen sharing is supported by this version of rpi-connect ✓ Wayland compositor available ✗ Screen sharing services enabled and active - Please run rpi-connect on to enable and start all required services +✓ Communication with Raspberry Pi Connect WebSocket server ✓ Communication with Raspberry Pi Connect API ✓ Authentication with Raspberry Pi Connect API ✓ Peer-to-peer connection candidate via STUN @@ -109,6 +113,7 @@ If Connect can communicate properly on your network, you should see output simil Screen sharing is supported by this version of rpi-connect ✓ Wayland compositor available ✓ Screen sharing services enabled and active +✓ Communication with Raspberry Pi Connect WebSocket server ✓ Communication with Raspberry Pi Connect API ✓ Authentication with Raspberry Pi Connect API ✓ Peer-to-peer connection candidate via STUN @@ -117,7 +122,7 @@ Screen sharing is supported by this version of rpi-connect If Connect can't communicate properly on your network, you'll see an "x" instead of a check next to the failing test case. Ask your network administrator to enable the following connections on your network: -* HTTPS requests to the Raspberry Pi Connect API on port 443 of `api.connect.raspberrypi.com` +* HTTPS requests to the Raspberry Pi Connect API and WebSocket server on port 443 of `api.connect.raspberrypi.com` and `ws.connect.raspberrypi.com` * requests to Raspberry Pi Connect STUN or TURN servers on UDP port 3478 of all of the following: ** `stun.raspberrypi.com` ** `turn1.raspberrypi.com` @@ -145,6 +150,7 @@ You should see output similar to the following: ---- Signed in: yes +Subscribed to events: yes Screen sharing: allowed (0 sessions active) Remote shell: allowed (0 sessions active) ----