Skip to content
Permalink
Browse files

kernel: Bump to 4.14.34

kernel: config: Enable the DS1621 I2C temperature sensor
kernel: overlays: Add ds1621 to the i2c-sensor overlay
See: raspberrypi/linux#2509

firmware: platform: Pi3 B+ reduce sdram freq to 450 while investigations are ongoing
See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=208821

firmware: arm_loader: Allow hdmi_ignore_composite to disable any display initialisation
See: raspberrypi/userland#447

firmware: Add aphy and dphy slew and drive register controls
  • Loading branch information
popcornmix committed Apr 16, 2018
1 parent ae9a493 commit a154f2136850dba827cf4bc40794854376902cbd
Showing 5,991 changed files with 68,883 additions and 68,865 deletions.
The diff you're trying to view is too large. We only load the first 3000 changed files.
BIN +6 Bytes (100%) boot/fixup.dat
Binary file not shown.
BIN +4 Bytes (100%) boot/fixup_cd.dat
Binary file not shown.
BIN +0 Bytes (100%) boot/fixup_db.dat
Binary file not shown.
BIN +6 Bytes (100%) boot/fixup_x.dat
Binary file not shown.
BIN +536 Bytes (100%) boot/kernel.img
Binary file not shown.
BIN -1008 Bytes (100%) boot/kernel7.img
Binary file not shown.
@@ -821,8 +821,8 @@ Name: i2c-sensor
Info: Adds support for a number of I2C barometric pressure and temperature
sensors on i2c_arm
Load: dtoverlay=i2c-sensor,<param>=<val>
Params: addr Set the address for the BME280, BMP280, TMP102,
HDC100X, LM75 or SHT3x
Params: addr Set the address for the BME280, BMP280, DS1621,
HDC100X, LM75, SHT3x or TMP102

bme280 Select the Bosch Sensortronic BME280
Valid addresses 0x76-0x77, default 0x76
@@ -834,6 +834,9 @@ Params: addr Set the address for the BME280, BMP280, TMP102,
bmp280 Select the Bosch Sensortronic BMP280
Valid addresses 0x76-0x77, default 0x76

ds1621 Select the Dallas Semiconductors DS1621 temp
sensor. Valid addresses 0x48-9x4f, default 0x48

hdc100x Select the Texas Instruments HDC100x temp sensor
Valid addresses 0x40-0x43, default 0x40

@@ -844,6 +847,10 @@ Params: addr Set the address for the BME280, BMP280, TMP102,

lm75addr Deprecated - use addr parameter instead

sht3x Select the Sensiron SHT3x temperature and
humidity sensor. Valid addresses 0x44-0x45,
default 0x44

si7020 Select the Silicon Labs Si7013/20/21 humidity/
temperature sensor

@@ -856,10 +863,6 @@ Params: addr Set the address for the BME280, BMP280, TMP102,
veml6070 Select the Vishay VEML6070 ultraviolet light
sensor

sht3x Select the Sensiron SHT3x temperature and
humidity sensor. Valid addresses 0x44-0x45,
default 0x44


Name: i2c0-bcm2708
Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations
BIN +311 Bytes (110%) boot/overlays/i2c-sensor.dtbo
Binary file not shown.
BIN +576 Bytes (100%) boot/start.elf
Binary file not shown.
BIN +576 Bytes (100%) boot/start_cd.elf
Binary file not shown.
BIN +576 Bytes (100%) boot/start_db.elf
Binary file not shown.
BIN +576 Bytes (100%) boot/start_x.elf
Binary file not shown.
@@ -7173,7 +7173,7 @@
0x8142892e ms_sensors_convert_and_read drivers/iio/common/ms_sensors/ms_sensors_i2c EXPORT_SYMBOL
0xab264fde chacha20_block vmlinux EXPORT_SYMBOL
0x8325f384 auth_domain_lookup vmlinux EXPORT_SYMBOL_GPL
0x63e17b86 divider_recalc_rate vmlinux EXPORT_SYMBOL_GPL
0x087ab154 divider_recalc_rate vmlinux EXPORT_SYMBOL_GPL
0x37b4cbea fb_get_mode vmlinux EXPORT_SYMBOL
0xed6281fd nfs4_schedule_session_recovery vmlinux EXPORT_SYMBOL_GPL
0xa4ea3c74 fib6_get_table net/ipv6/ipv6 EXPORT_SYMBOL_GPL
@@ -7248,7 +7248,7 @@
0x8142892e ms_sensors_convert_and_read drivers/iio/common/ms_sensors/ms_sensors_i2c EXPORT_SYMBOL
0xab264fde chacha20_block vmlinux EXPORT_SYMBOL
0xa7fac36f auth_domain_lookup vmlinux EXPORT_SYMBOL_GPL
0x63e17b86 divider_recalc_rate vmlinux EXPORT_SYMBOL_GPL
0x087ab154 divider_recalc_rate vmlinux EXPORT_SYMBOL_GPL
0xa1dccdc4 fb_get_mode vmlinux EXPORT_SYMBOL
0x82383a8b nfs4_schedule_session_recovery vmlinux EXPORT_SYMBOL_GPL
0xbb7a437f fib6_get_table net/ipv6/ipv6 EXPORT_SYMBOL_GPL

0 comments on commit a154f21

Please sign in to comment.
You can’t perform that action at this time.