Permalink
Browse files

kernel: Bump to 4.4.19

kernel: overlays: added sc16is750 UART over I2C
See: raspberrypi/linux#1617

kernel: config: Add CONFIG_IPVLAN module
See: raspberrypi/linux#1612

kernel: config: Add CONFIG_VXLAN module
See: raspberrypi/linux#1614

firmware: platform: Make the default UART0 clock 48MHz for all Pis
See: raspberrypi/linux#1601
See: #643
  • Loading branch information...
popcornmix committed Aug 23, 2016
1 parent 58567cb commit d0bc6ce8e2ae7850959fed4edb0695f3cddfb96a
Showing 6,080 changed files with 133,468 additions and 133,408 deletions.
The diff you're trying to view is too large. We only load the first 3000 changed files.
View
Binary file not shown.
View
Binary file not shown.
View
Binary file not shown.
View
@@ -340,7 +340,7 @@ Params: gpio_pin Input pin number. Default is 18.
Name: gpio-poweroff
Info: Drives a GPIO high or low on reboot
Info: Drives a GPIO high or low on poweroff (including halt)
Load: dtoverlay=gpio-poweroff,<param>=<val>
Params: gpiopin GPIO for signalling (default 26)
@@ -935,6 +935,16 @@ Load: dtoverlay=rra-digidac1-wm8741-audio
Params: <None>
Name: sc16is750-i2c
Info: Overlay for the NXP SC16IS750 UART with I2C Interface
Enables the chip on I2C1 at 0x48. To select another address,
please refer to table 10 in reference manual.
Load: dtoverlay=sc16is750-i2c,<param>=<val>
Params: int_pin GPIO used for IRQ (default 24)
addr Address (default 0x48)
Name: sc16is752-spi1
Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface
Enables the chip on SPI1.
Binary file not shown.
View
Binary file not shown.
View
Binary file not shown.
View
Binary file not shown.
View
Binary file not shown.
View

Large diffs are not rendered by default.

Oops, something went wrong.
View

Large diffs are not rendered by default.

Oops, something went wrong.
Oops, something went wrong.

0 comments on commit d0bc6ce

Please sign in to comment.