[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.79-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1487 SMP Tue Nov 16 12:25:08 GMT 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [ 0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=DC:A6:32:70:B1:73 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=de1b997a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait video=HDMI-A-1:1920x1080@60D [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [ 0.000000] Memory: 3601140K/4050944K available (10240K kernel code, 1366K rwdata, 3192K rodata, 2048K init, 883K bss, 122124K reserved, 327680K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34341 entries in 101 pages [ 0.000000] ftrace: allocated 101 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000036] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000100] bcm2835: system timer (irq = 26) [ 0.000753] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000776] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000798] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000817] Switching to timer-based delay loop, resolution 18ns [ 0.001086] Console: colour dummy device 80x30 [ 0.001883] printk: console [tty1] enabled [ 0.001950] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.002006] pid_max: default: 32768 minimum: 301 [ 0.002189] LSM: Security Framework initializing [ 0.002396] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002440] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003976] cgroup: Disabling memory control group subsystem [ 0.004242] CPU: Testing write buffer coherency: ok [ 0.004734] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005977] Setting up static identity map for 0x200000 - 0x20003c [ 0.006193] rcu: Hierarchical SRCU implementation. [ 0.007160] smp: Bringing up secondary CPUs ... [ 0.008441] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009847] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.011422] smp: Brought up 1 node, 4 CPUs [ 0.011470] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.011500] CPU: All CPU(s) started in HYP mode. [ 0.011526] CPU: Virtualization extensions available. [ 0.012393] devtmpfs: initialized [ 0.026968] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.027203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.027257] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.035456] pinctrl core: initialized pinctrl subsystem [ 0.036600] NET: Registered protocol family 16 [ 0.040808] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.041657] audit: initializing netlink subsys (disabled) [ 0.041941] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.042532] thermal_sys: Registered thermal governor 'step_wise' [ 0.043286] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043341] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.043751] Serial: AMBA PL011 UART driver [ 0.087306] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.100929] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-11-16T17:38:45, variant start [ 0.110941] raspberrypi-firmware soc:firmware: Firmware hash is 99c5aad7da0d1e3b2c28669a3941db77734b9f2d [ 0.152096] Kprobes globally optimized [ 0.157666] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.162134] vgaarb: loaded [ 0.162615] SCSI subsystem initialized [ 0.162872] usbcore: registered new interface driver usbfs [ 0.162948] usbcore: registered new interface driver hub [ 0.163036] usbcore: registered new device driver usb [ 0.163455] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.165538] clocksource: Switched to clocksource arch_sys_counter [ 1.126065] VFS: Disk quotas dquot_6.6.0 [ 1.126192] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.126376] FS-Cache: Loaded [ 1.126601] CacheFiles: Loaded [ 1.127682] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes, mapped to 0x(ptrval) [ 1.127726] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296 [ 1.137601] Console: switching to colour frame buffer device 228x61 [ 1.146297] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered! [ 1.156619] NET: Registered protocol family 2 [ 1.156938] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.158564] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.158694] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.158836] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.158985] TCP: Hash tables configured (established 8192 bind 8192) [ 1.159226] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.159336] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.160074] NET: Registered protocol family 1 [ 1.160871] RPC: Registered named UNIX socket transport module. [ 1.160948] RPC: Registered udp transport module. [ 1.161010] RPC: Registered tcp transport module. [ 1.161073] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.161158] PCI: CLS 0 bytes, default 64 [ 1.164597] Initialise system trusted keyrings [ 1.164903] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.173717] zbud: loaded [ 1.175687] FS-Cache: Netfs 'nfs' registered for caching [ 1.176548] NFS: Registering the id_resolver key type [ 1.176641] Key type id_resolver registered [ 1.176700] Key type id_legacy registered [ 1.176879] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.176961] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.178056] Key type asymmetric registered [ 1.178119] Asymmetric key parser 'x509' registered [ 1.180973] bounce: pool size: 64 pages [ 1.183618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.186568] io scheduler mq-deadline registered [ 1.189198] io scheduler kyber registered [ 1.196763] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.199445] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.202154] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.204867] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.267643] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.270630] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.273198] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.275803] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.278372] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.281154] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.287222] PCI: bus0: Fast back to back transfers disabled [ 1.290126] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.292830] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.295853] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.301919] PCI: bus1: Fast back to back transfers disabled [ 1.304568] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.307216] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.309877] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.312327] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.315299] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.318144] pcieport 0000:00:00.0: PME: Signaling with IRQ 80 [ 1.331133] iproc-rng200 fe104000.rng: hwrng registered [ 1.334115] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.338358] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.353502] brd: module loaded [ 1.368683] loop: module loaded [ 1.373185] Loading iSCSI transport class v2.0-870. [ 1.379024] libphy: Fixed MDIO Bus: probed [ 1.383423] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.405565] libphy: bcmgenet MII bus: probed [ 1.495684] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.499391] usbcore: registered new interface driver r8152 [ 1.501902] usbcore: registered new interface driver lan78xx [ 1.504370] usbcore: registered new interface driver smsc95xx [ 1.508419] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.510877] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.513206] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.518921] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890 [ 1.522682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.525159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.527575] usb usb1: Product: xHCI Host Controller [ 1.529961] usb usb1: Manufacturer: Linux 5.10.79-v7l+ xhci-hcd [ 1.532413] usb usb1: SerialNumber: 0000:01:00.0 [ 1.535639] hub 1-0:1.0: USB hub found [ 1.538146] hub 1-0:1.0: 1 port detected [ 1.541231] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.543635] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.546062] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.549015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.551487] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.553921] usb usb2: Product: xHCI Host Controller [ 1.556383] usb usb2: Manufacturer: Linux 5.10.79-v7l+ xhci-hcd [ 1.558819] usb usb2: SerialNumber: 0000:01:00.0 [ 1.561840] hub 2-0:1.0: USB hub found [ 1.564298] hub 2-0:1.0: 4 ports detected [ 1.568678] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.571437] dwc_otg: FIQ enabled [ 1.571452] dwc_otg: NAK holdoff enabled [ 1.571467] dwc_otg: FIQ split-transaction FSM enabled [ 1.571486] Module dwc_common_port init [ 1.571982] usbcore: registered new interface driver uas [ 1.574461] usbcore: registered new interface driver usb-storage [ 1.577050] mousedev: PS/2 mouse device common for all mice [ 1.581195] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.587247] sdhci: Secure Digital Host Controller Interface driver [ 1.589669] sdhci: Copyright(c) Pierre Ossman [ 1.592819] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.596700] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.603361] ledtrig-cpu: registered to indicate activity on CPUs [ 1.606156] hid: raw HID events driver (C) Jiri Kosina [ 1.608733] usbcore: registered new interface driver usbhid [ 1.611050] usbhid: USB HID core driver [ 1.619672] Initializing XFRM netlink socket [ 1.622136] NET: Registered protocol family 17 [ 1.624606] Key type dns_resolver registered [ 1.627388] Registering SWP/SWPB emulation handler [ 1.629960] registered taskstats version 1 [ 1.632315] Loading compiled-in X.509 certificates [ 1.635557] Key type ._fscrypt registered [ 1.637884] Key type .fscrypt registered [ 1.640193] Key type fscrypt-provisioning registered [ 1.654441] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.657170] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.659534] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2 [ 1.668723] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.672207] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.674559] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.707347] of_cfs_init [ 1.710006] of_cfs_init: OK [ 1.728250] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.732232] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.736202] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.741490] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.744347] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.747328] Waiting for root device PARTUUID=de1b997a-02... [ 1.748604] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.835883] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.850901] mmc1: new high speed SDIO card at address 0001 [ 1.861116] mmc0: new ultra high speed DDR50 SDXC card at address 0001 [ 1.864238] mmcblk0: mmc0:0001 ED4QT 119 GiB [ 1.868405] mmcblk0: p1 p2 [ 1.912363] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.914801] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.923056] devtmpfs: mounted [ 1.935878] Freeing unused kernel memory: 2048K [ 1.955884] Run /sbin/init as init process [ 1.958198] with arguments: [ 1.958213] /sbin/init [ 1.958228] with environment: [ 1.958242] HOME=/ [ 1.958256] TERM=linux [ 2.018254] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 2.020714] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.023062] usb 1-1: Product: USB2.0 Hub [ 2.027660] hub 1-1:1.0: USB hub found [ 2.030382] hub 1-1:1.0: 4 ports detected [ 2.355598] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [ 2.393059] systemd[1]: System time before build time, advancing clock. [ 2.494018] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01 [ 2.496618] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.497700] NET: Registered protocol family 10 [ 2.499038] usb 1-1.4: Product: USB Receiver [ 2.503859] usb 1-1.4: Manufacturer: Logitech [ 2.506404] Segment Routing with IPv6 [ 2.524851] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0 [ 2.571248] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.578539] systemd[1]: Detected architecture arm. [ 2.606582] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input0 [ 2.618768] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1 [ 2.622238] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input2 [ 2.675197] systemd[1]: Set hostname to . [ 2.686003] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input3 [ 2.689754] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input1 [ 2.701480] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2 [ 3.378243] random: systemd: uninitialized urandom read (16 bytes read) [ 3.392123] random: systemd: uninitialized urandom read (16 bytes read) [ 3.395879] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.403879] random: systemd: uninitialized urandom read (16 bytes read) [ 3.407622] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.416416] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.424839] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.433311] systemd[1]: Listening on udev Control Socket. [ 3.444433] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.452638] systemd[1]: Reached target Swap. [ 4.312595] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.406463] systemd-journald[131]: Received request to flush runtime journal from PID 1 [ 5.000110] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 5.000775] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 5.002962] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 5.003605] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 5.072886] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.075229] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 5.075259] [vc_sm_connected_init]: start [ 5.079189] mc: Linux media interface: v0.10 [ 5.082148] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.115056] [vc_sm_connected_init]: installed successfully [ 5.123082] videodev: Linux video capture interface: v2.00 [ 5.127146] bcm2835_audio bcm2835_audio: card created with 8 channels [ 5.182562] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.193244] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.199272] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.204117] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.204742] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.205280] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.211256] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.212487] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.212520] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.212603] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.212629] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.212652] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.212955] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.213768] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.213814] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.225934] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.225987] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.250699] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.250763] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.270315] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 5.270369] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 5.278574] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 5.287997] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 5.373794] checking generic (3e4e0000 6e7000) vs hw (0 ffffffffffffffff) [ 5.373821] fb0: switching to vc4drmfb from simple [ 5.374513] Console: switching to colour dummy device 80x30 [ 5.412382] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.416826] [drm] forcing HDMI-A-1 connector on [ 5.425600] Registered IR keymap rc-cec [ 5.425806] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.426094] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5 [ 5.427080] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 5.553078] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.553433] [drm] forcing HDMI-A-1 connector on [ 5.586485] Registered IR keymap rc-cec [ 5.586685] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.586907] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6 [ 5.621546] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.643364] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 5.667765] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.739860] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.749218] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.750996] usbcore: registered new interface driver brcmfmac [ 5.827296] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 6.011831] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.011975] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.021706] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 6.054599] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.054948] [drm] forcing HDMI-A-1 connector on [ 6.068688] Registered IR keymap rc-cec [ 6.068872] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.069098] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input7 [ 6.137317] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 6.141333] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2 [ 6.277350] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.277661] [drm] forcing HDMI-A-1 connector on [ 6.278875] Registered IR keymap rc-cec [ 6.279041] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.279269] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input8 [ 6.283592] input: Logitech Wireless Device PID:404d Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input9 [ 6.284833] input: Logitech Wireless Device PID:404d Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10 [ 6.285483] input: Logitech Wireless Device PID:404d Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input11 [ 6.291394] input: Logitech Wireless Device PID:404d System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input12 [ 6.291630] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.291902] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:01:00.0-1.4/input2:1 [ 6.305298] Registered IR keymap rc-cec [ 6.305490] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 6.305882] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input16 [ 6.313837] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.314279] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 6.314631] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.314967] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.315289] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.315541] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.316010] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.362360] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 6.433429] Console: switching to colour frame buffer device 240x67 [ 6.460045] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 7.121161] input: Logitech K400 Plus as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input17 [ 7.122497] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:01:00.0-1.4/input2:1 [ 7.745947] uart-pl011 fe201000.serial: no DMA platform data [ 7.813510] random: crng init done [ 7.813533] random: 7 urandom warning(s) missed due to ratelimiting [ 7.956930] 8021q: 802.1Q VLAN Support v1.8 [ 7.985643] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 8.459600] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 8.460095] bcmgenet fd580000.ethernet eth0: Link is Down [ 12.635835] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.635889] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.672026] Bluetooth: Core ver 2.22 [ 14.672119] NET: Registered protocol family 31 [ 14.672131] Bluetooth: HCI device and connection manager initialized [ 14.672156] Bluetooth: HCI socket layer initialized [ 14.672174] Bluetooth: L2CAP socket layer initialized [ 14.672201] Bluetooth: SCO socket layer initialized [ 14.680812] Bluetooth: HCI UART driver ver 2.3 [ 14.680829] Bluetooth: HCI UART protocol H4 registered [ 14.680909] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 14.681205] Bluetooth: HCI UART protocol Broadcom registered [ 14.918900] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.918908] Bluetooth: BNEP filters: protocol multicast [ 14.918926] Bluetooth: BNEP socket layer initialized