[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.79-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1487 SMP Tue Nov 16 12:25:08 GMT 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [ 0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:70:B1:73 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=de1b997a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait video=HDMI-A-1:1920x1080@60D drm.edid_firmware=edid.dat [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [ 0.000000] Memory: 3601140K/4050944K available (10240K kernel code, 1366K rwdata, 3192K rodata, 2048K init, 883K bss, 122124K reserved, 327680K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34341 entries in 101 pages [ 0.000000] ftrace: allocated 101 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1 [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000034] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000094] bcm2835: system timer (irq = 26) [ 0.000742] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000763] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000786] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000804] Switching to timer-based delay loop, resolution 18ns [ 0.001065] Console: colour dummy device 80x30 [ 0.001845] printk: console [tty1] enabled [ 0.001910] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001965] pid_max: default: 32768 minimum: 301 [ 0.002141] LSM: Security Framework initializing [ 0.002338] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002383] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003857] cgroup: Disabling memory control group subsystem [ 0.004112] CPU: Testing write buffer coherency: ok [ 0.004584] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005804] Setting up static identity map for 0x200000 - 0x20003c [ 0.006018] rcu: Hierarchical SRCU implementation. [ 0.006963] smp: Bringing up secondary CPUs ... [ 0.008183] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009538] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010929] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.011088] smp: Brought up 1 node, 4 CPUs [ 0.011134] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.011164] CPU: All CPU(s) started in HYP mode. [ 0.011191] CPU: Virtualization extensions available. [ 0.012054] devtmpfs: initialized [ 0.026247] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.026496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026549] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.034629] pinctrl core: initialized pinctrl subsystem [ 0.035702] NET: Registered protocol family 16 [ 0.039641] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.040476] audit: initializing netlink subsys (disabled) [ 0.040751] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.041370] thermal_sys: Registered thermal governor 'step_wise' [ 0.042125] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.042180] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.042593] Serial: AMBA PL011 UART driver [ 0.085693] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.100907] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-11-16T17:38:45, variant start [ 0.110920] raspberrypi-firmware soc:firmware: Firmware hash is 99c5aad7da0d1e3b2c28669a3941db77734b9f2d [ 0.152222] Kprobes globally optimized [ 0.157641] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.162010] vgaarb: loaded [ 0.162477] SCSI subsystem initialized [ 0.162723] usbcore: registered new interface driver usbfs [ 0.162800] usbcore: registered new interface driver hub [ 0.162888] usbcore: registered new device driver usb [ 0.163293] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.165284] clocksource: Switched to clocksource arch_sys_counter [ 1.124233] VFS: Disk quotas dquot_6.6.0 [ 1.124353] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.124533] FS-Cache: Loaded [ 1.124737] CacheFiles: Loaded [ 1.134908] NET: Registered protocol family 2 [ 1.135160] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.136697] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.136859] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.136947] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.137037] TCP: Hash tables configured (established 8192 bind 8192) [ 1.137212] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.137268] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.137960] NET: Registered protocol family 1 [ 1.138715] RPC: Registered named UNIX socket transport module. [ 1.138748] RPC: Registered udp transport module. [ 1.138776] RPC: Registered tcp transport module. [ 1.138805] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.138843] PCI: CLS 0 bytes, default 64 [ 1.142138] Initialise system trusted keyrings [ 1.142386] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.150959] zbud: loaded [ 1.152745] FS-Cache: Netfs 'nfs' registered for caching [ 1.153520] NFS: Registering the id_resolver key type [ 1.153586] Key type id_resolver registered [ 1.153614] Key type id_legacy registered [ 1.153768] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.153801] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.154879] Key type asymmetric registered [ 1.154912] Asymmetric key parser 'x509' registered [ 1.155121] bounce: pool size: 64 pages [ 1.155178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.155452] io scheduler mq-deadline registered [ 1.155484] io scheduler kyber registered [ 1.160209] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.160262] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.160364] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.160472] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.217386] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.217767] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.217804] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.217839] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.217949] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.218210] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.221668] PCI: bus0: Fast back to back transfers disabled [ 1.222025] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.222168] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.222619] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.226089] PCI: bus1: Fast back to back transfers disabled [ 1.226198] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.226239] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.226341] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.226380] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.226823] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.227082] pcieport 0000:00:00.0: PME: Signaling with IRQ 80 [ 1.239114] iproc-rng200 fe104000.rng: hwrng registered [ 1.239499] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.241006] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.253294] brd: module loaded [ 1.265712] loop: module loaded [ 1.267549] Loading iSCSI transport class v2.0-870. [ 1.270768] libphy: Fixed MDIO Bus: probed [ 1.272628] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.285326] libphy: bcmgenet MII bus: probed [ 1.375433] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.376612] usbcore: registered new interface driver r8152 [ 1.376710] usbcore: registered new interface driver lan78xx [ 1.376788] usbcore: registered new interface driver smsc95xx [ 1.378425] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.378608] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.378659] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.382000] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890 [ 1.383340] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.383381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.383417] usb usb1: Product: xHCI Host Controller [ 1.383447] usb usb1: Manufacturer: Linux 5.10.79-v7l+ xhci-hcd [ 1.383478] usb usb1: SerialNumber: 0000:01:00.0 [ 1.384226] hub 1-0:1.0: USB hub found [ 1.384342] hub 1-0:1.0: 1 port detected [ 1.385030] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.385073] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.385119] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.385698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.385738] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.385773] usb usb2: Product: xHCI Host Controller [ 1.385803] usb usb2: Manufacturer: Linux 5.10.79-v7l+ xhci-hcd [ 1.385833] usb usb2: SerialNumber: 0000:01:00.0 [ 1.386559] hub 2-0:1.0: USB hub found [ 1.386664] hub 2-0:1.0: 4 ports detected [ 1.388472] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.388850] dwc_otg: FIQ enabled [ 1.388865] dwc_otg: NAK holdoff enabled [ 1.388880] dwc_otg: FIQ split-transaction FSM enabled [ 1.388897] Module dwc_common_port init [ 1.389378] usbcore: registered new interface driver uas [ 1.389506] usbcore: registered new interface driver usb-storage [ 1.389724] mousedev: PS/2 mouse device common for all mice [ 1.391530] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.395073] sdhci: Secure Digital Host Controller Interface driver [ 1.395108] sdhci: Copyright(c) Pierre Ossman [ 1.395937] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.396589] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.400828] ledtrig-cpu: registered to indicate activity on CPUs [ 1.401177] hid: raw HID events driver (C) Jiri Kosina [ 1.401395] usbcore: registered new interface driver usbhid [ 1.401426] usbhid: USB HID core driver [ 1.407620] Initializing XFRM netlink socket [ 1.407683] NET: Registered protocol family 17 [ 1.407804] Key type dns_resolver registered [ 1.408233] Registering SWP/SWPB emulation handler [ 1.408415] registered taskstats version 1 [ 1.408458] Loading compiled-in X.509 certificates [ 1.409328] Key type ._fscrypt registered [ 1.409359] Key type .fscrypt registered [ 1.409387] Key type fscrypt-provisioning registered [ 1.421185] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.421519] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.421613] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2 [ 1.429176] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.430259] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.430294] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.460112] of_cfs_init [ 1.460385] of_cfs_init: OK [ 1.480851] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.482573] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.484469] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.487545] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.489264] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.496999] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.497680] Waiting for root device PARTUUID=de1b997a-02... [ 1.572133] mmc1: new high speed SDIO card at address 0001 [ 1.604634] mmc0: new ultra high speed DDR50 SDXC card at address 0001 [ 1.605569] mmcblk0: mmc0:0001 ED4QT 119 GiB [ 1.607310] mmcblk0: p1 p2 [ 1.631816] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.631931] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.637812] devtmpfs: mounted [ 1.648067] Freeing unused kernel memory: 2048K [ 1.665333] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.685659] Run /sbin/init as init process [ 1.685688] with arguments: [ 1.685703] /sbin/init [ 1.685717] with environment: [ 1.685732] HOME=/ [ 1.685746] TERM=linux [ 1.848031] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.848081] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.848115] usb 1-1: Product: USB2.0 Hub [ 1.850619] hub 1-1:1.0: USB hub found [ 1.850893] hub 1-1:1.0: 4 ports detected [ 2.106805] systemd[1]: System time before build time, advancing clock. [ 2.175354] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [ 2.208154] NET: Registered protocol family 10 [ 2.209597] Segment Routing with IPv6 [ 2.272992] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.274526] systemd[1]: Detected architecture arm. [ 2.333208] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01 [ 2.333256] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.333293] usb 1-1.4: Product: USB Receiver [ 2.333324] usb 1-1.4: Manufacturer: Logitech [ 2.345172] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0 [ 2.365570] systemd[1]: Set hostname to . [ 2.416534] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input0 [ 2.425810] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1 [ 2.426606] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input2 [ 2.495813] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input3 [ 2.496552] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input1 [ 2.503308] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2 [ 3.055923] random: systemd: uninitialized urandom read (16 bytes read) [ 3.066039] random: systemd: uninitialized urandom read (16 bytes read) [ 3.067124] systemd[1]: Listening on Journal Socket. [ 3.067819] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.067918] random: systemd: uninitialized urandom read (16 bytes read) [ 3.071068] systemd[1]: Created slice system-getty.slice. [ 3.079618] systemd[1]: Starting Load Kernel Modules... [ 3.080827] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.087929] systemd[1]: Mounting POSIX Message Queue File System... [ 3.090261] systemd[1]: Listening on udev Control Socket. [ 3.842325] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.956898] systemd-journald[126]: Received request to flush runtime journal from PID 1 [ 4.480969] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 4.482302] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 4.493052] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 4.496005] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 4.586332] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.588520] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.588545] [vc_sm_connected_init]: start [ 4.612979] mc: Linux media interface: v0.10 [ 4.613861] [vc_sm_connected_init]: installed successfully [ 4.641215] videodev: Linux video capture interface: v2.00 [ 4.679845] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.686753] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.689588] bcm2835_audio bcm2835_audio: card created with 8 channels [ 4.691501] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.706633] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 4.707613] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.719941] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.743276] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.743432] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.744886] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 4.748797] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.748867] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.749462] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 4.750189] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 4.751810] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 4.751854] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 4.751894] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 4.751926] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 4.751975] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 4.752261] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 4.753578] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.753629] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.760218] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 4.760265] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 4.814243] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 4.816034] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 5.004393] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 5.091516] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.119238] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.119665] [drm] forcing HDMI-A-1 connector on [ 5.139750] Registered IR keymap rc-cec [ 5.139956] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.140197] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5 [ 5.157681] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.187052] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 5.222024] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.235897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.236428] usbcore: registered new interface driver brcmfmac [ 5.529064] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.529203] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.539253] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 5.567531] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.567862] [drm] forcing HDMI-A-1 connector on [ 5.588530] Registered IR keymap rc-cec [ 5.588730] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.588956] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6 [ 5.687578] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 5.705658] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2 [ 5.844843] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.845167] [drm] forcing HDMI-A-1 connector on [ 5.859304] input: Logitech Wireless Device PID:404d Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input7 [ 5.862588] input: Logitech Wireless Device PID:404d Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input8 [ 5.863011] Registered IR keymap rc-cec [ 5.863176] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.863408] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input10 [ 5.863795] input: Logitech Wireless Device PID:404d Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input9 [ 5.865171] input: Logitech Wireless Device PID:404d System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input11 [ 5.867394] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:01:00.0-1.4/input2:1 [ 5.877163] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 5.897731] Registered IR keymap rc-cec [ 5.897945] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 5.898162] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input15 [ 5.901629] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 5.902061] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 5.902386] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 5.902729] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 5.903062] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 5.903320] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 5.903703] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 5.918469] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 5.925985] [drm] Got external EDID base block and 1 extension from "edid.dat" for connector "HDMI-A-1" [ 5.958924] Console: switching to colour frame buffer device 240x67 [ 5.986346] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 6.626390] input: Logitech K400 Plus as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input16 [ 6.632225] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:01:00.0-1.4/input2:1 [ 6.931608] random: crng init done [ 6.931629] random: 7 urandom warning(s) missed due to ratelimiting [ 7.036522] 8021q: 802.1Q VLAN Support v1.8 [ 7.076646] uart-pl011 fe201000.serial: no DMA platform data [ 7.245443] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 7.711965] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 7.712467] bcmgenet fd580000.ethernet eth0: Link is Down [ 11.835610] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 11.835666] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.903460] Bluetooth: Core ver 2.22 [ 13.903578] NET: Registered protocol family 31 [ 13.903594] Bluetooth: HCI device and connection manager initialized [ 13.903624] Bluetooth: HCI socket layer initialized [ 13.903648] Bluetooth: L2CAP socket layer initialized [ 13.903684] Bluetooth: SCO socket layer initialized [ 13.914741] Bluetooth: HCI UART driver ver 2.3 [ 13.914763] Bluetooth: HCI UART protocol H4 registered [ 13.914871] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.915229] Bluetooth: HCI UART protocol Broadcom registered [ 14.130020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.130029] Bluetooth: BNEP filters: protocol multicast [ 14.130042] Bluetooth: BNEP socket layer initialized [ 16.476030] [drm] Got external EDID base block and 1 extension from "edid.dat" for connector "HDMI-A-1"