-------------------------------------------------------------------------------- libcamera-apps Bug Report -------------------------------------------------------------------------------- Date: 05-10-2023 (14:50:51) Command: /usr/bin/camera-bug-report -t 10000 -c libcamera-hello -t 5000 -------------------------------------------------------------------------------- Hardware information -------------------------------------------------------------------------------- ** hostname ** raspberrypi ** cat /proc/cpuinfo ** processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 57.60 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 57.60 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 2 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 57.60 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 3 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 57.60 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : BCM2835 Revision : a01041 Serial : 0000000084017f3c Model : Raspberry Pi 2 Model B Rev 1.1 -------------------------------------------------------------------------------- Configuration -------------------------------------------------------------------------------- ** cat /boot/cmdline.txt ** console=serial0,115200 console=tty1 root=PARTUUID=331d3933-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles ** cat /boot/config.txt ** # For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output #hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on # Automatically load overlays for detected cameras camera_auto_detect=1 # Automatically load overlays for detected DSI displays display_auto_detect=1 # Enable DRM VC4 V3D driver dtoverlay=vc4-kms-v3d max_framebuffers=2 # Disable compensation for displays with overscan disable_overscan=1 [cm4] # Enable host mode on the 2711 built-in XHCI USB controller. # This line should be removed if the legacy DWC2 controller is required # (e.g. for USB device mode) or if USB support is not required. otg_mode=1 [all] [pi4] # Run as fast as firmware / board allows arm_boost=1 [all] -------------------------------------------------------------------------------- Logs -------------------------------------------------------------------------------- ** dmesg ** [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 6.1.21-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP Mon Apr 3 17:20:52 BST 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x1ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] percpu: Embedded 17 pages/cpu s36884 r8192 d24556 u69632 [ 0.000000] pcpu-alloc: s36884 r8192 d24556 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=331d3933-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 680932K/970752K available (10240K kernel code, 1452K rwdata, 2900K rodata, 1024K init, 613K bss, 27676K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34800 entries in 103 pages [ 0.000000] ftrace: allocated 102 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000025] Switching to timer-based delay loop, resolution 52ns [ 0.000496] Console: colour dummy device 80x30 [ 0.000605] printk: console [tty1] enabled [ 0.000673] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000705] pid_max: default: 32768 minimum: 301 [ 0.000887] LSM: Security Framework initializing [ 0.001178] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001213] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002704] cgroup: Disabling memory control group subsystem [ 0.003062] CPU: Testing write buffer coherency: ok [ 0.003702] CPU0: update cpu_capacity 1024 [ 0.003730] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.005132] cblist_init_generic: Setting adjustable number of callback queues. [ 0.005163] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005352] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005580] Setting up static identity map for 0x100000 - 0x10003c [ 0.005804] rcu: Hierarchical SRCU implementation. [ 0.005818] rcu: Max phase no-delay instances is 1000. [ 0.006885] smp: Bringing up secondary CPUs ... [ 0.008293] CPU1: update cpu_capacity 1024 [ 0.008314] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.009802] CPU2: update cpu_capacity 1024 [ 0.009823] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.011290] CPU3: update cpu_capacity 1024 [ 0.011309] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.011465] smp: Brought up 1 node, 4 CPUs [ 0.011500] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.011517] CPU: All CPU(s) started in HYP mode. [ 0.011526] CPU: Virtualization extensions available. [ 0.012587] devtmpfs: initialized [ 0.031042] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.031367] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.031412] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.045664] pinctrl core: initialized pinctrl subsystem [ 0.047407] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.051256] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.057899] audit: initializing netlink subsys (disabled) [ 0.058337] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1 [ 0.059258] thermal_sys: Registered thermal governor 'step_wise' [ 0.060426] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.060456] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.060811] Serial: AMBA PL011 UART driver [ 0.068220] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.073673] platform 3f801000.csi: Fixed dependency cycle(s) with /soc/i2c0mux/i2c@1/ov5647@36 [ 0.090235] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start [ 0.100256] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54 [ 0.154232] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.161361] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.163663] SCSI subsystem initialized [ 0.164010] usbcore: registered new interface driver usbfs [ 0.164102] usbcore: registered new interface driver hub [ 0.164181] usbcore: registered new device driver usb [ 0.164460] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.164711] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.165099] pps_core: LinuxPPS API ver. 1 registered [ 0.165115] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.165152] PTP clock support registered [ 2.086940] clocksource: Switched to clocksource arch_sys_counter [ 2.207912] VFS: Disk quotas dquot_6.6.0 [ 2.208040] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.208243] FS-Cache: Loaded [ 2.208717] CacheFiles: Loaded [ 2.222862] NET: Registered PF_INET protocol family [ 2.223275] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.227233] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.227293] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.227331] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.227559] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.227916] TCP: Hash tables configured (established 8192 bind 8192) [ 2.228136] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.228223] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.228587] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.229449] RPC: Registered named UNIX socket transport module. [ 2.229471] RPC: Registered udp transport module. [ 2.229483] RPC: Registered tcp transport module. [ 2.229493] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.231594] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 2.236015] Initialise system trusted keyrings [ 2.236452] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 2.248496] zbud: loaded [ 2.251838] NFS: Registering the id_resolver key type [ 2.251898] Key type id_resolver registered [ 2.251913] Key type id_legacy registered [ 2.252081] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.252099] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.253843] Key type asymmetric registered [ 2.253871] Asymmetric key parser 'x509' registered [ 2.254121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.254141] io scheduler mq-deadline registered [ 2.254162] io scheduler kyber registered [ 2.258789] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes [ 2.258831] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880 [ 2.259506] Console: switching to colour frame buffer device 90x30 [ 2.264464] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered! [ 2.270121] bcm2835-rng 3f104000.rng: hwrng registered [ 2.270591] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.271800] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.288269] brd: module loaded [ 2.299018] loop: module loaded [ 2.299864] Loading iSCSI transport class v2.0-870. [ 2.301936] usbcore: registered new interface driver lan78xx [ 2.302039] usbcore: registered new interface driver smsc95xx [ 2.302069] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 3.030355] Core Release: 2.80a [ 3.030386] Setting default values for core params [ 3.030423] Finished setting default values for core params [ 3.230754] Using Buffer DMA mode [ 3.230769] Periodic Transfer Interrupt Enhancement - disabled [ 3.230780] Multiprocessor Interrupt Enhancement - disabled [ 3.230792] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.230847] Dedicated Tx FIFOs mode [ 3.232095] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 9ed04000 dma = 0xded04000 len=9024 [ 3.232150] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 3.232169] dwc_otg: Microframe scheduler enabled [ 3.232330] WARN::hcd_init_fiq:457: FIQ on core 1 [ 3.232354] WARN::hcd_init_fiq:458: FIQ ASM at 807c4360 length 36 [ 3.232380] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 3.232414] dwc_otg 3f980000.usb: DWC OTG Controller [ 3.232469] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.232527] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 3.232588] Init: Port Power? op_state=1 [ 3.232599] Init: Power Port (0) [ 3.232972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.232999] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.233020] usb usb1: Product: DWC OTG Controller [ 3.233036] usb usb1: Manufacturer: Linux 6.1.21-v7+ dwc_otg_hcd [ 3.233051] usb usb1: SerialNumber: 3f980000.usb [ 3.234009] hub 1-0:1.0: USB hub found [ 3.234087] hub 1-0:1.0: 1 port detected [ 3.234995] dwc_otg: FIQ enabled [ 3.235011] dwc_otg: NAK holdoff enabled [ 3.235022] dwc_otg: FIQ split-transaction FSM enabled [ 3.235050] Module dwc_common_port init [ 3.235496] usbcore: registered new interface driver usb-storage [ 3.235810] mousedev: PS/2 mouse device common for all mice [ 3.238818] sdhci: Secure Digital Host Controller Interface driver [ 3.238842] sdhci: Copyright(c) Pierre Ossman [ 3.239164] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.240481] ledtrig-cpu: registered to indicate activity on CPUs [ 3.240895] hid: raw HID events driver (C) Jiri Kosina [ 3.241093] usbcore: registered new interface driver usbhid [ 3.241108] usbhid: USB HID core driver [ 3.246262] Initializing XFRM netlink socket [ 3.246360] NET: Registered PF_PACKET protocol family [ 3.246500] Key type dns_resolver registered [ 3.247670] Registering SWP/SWPB emulation handler [ 3.248672] registered taskstats version 1 [ 3.248748] Loading compiled-in X.509 certificates [ 3.250011] Key type .fscrypt registered [ 3.250036] Key type fscrypt-provisioning registered [ 3.266000] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.266220] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.266774] printk: console [ttyAMA0] enabled [ 3.269699] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.270094] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.272033] sdhost: log_buf @ b6942d32 (ded03000) [ 3.320552] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.324934] of_cfs_init [ 3.325271] of_cfs_init: OK [ 3.328622] Waiting for root device PARTUUID=331d3933-02... [ 3.354466] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.357642] mmc0: new high speed SDHC card at address 5048 [ 3.358830] mmcblk0: mmc0:5048 SD32G 29.7 GiB [ 3.362430] mmcblk0: p1 p2 [ 3.363366] mmcblk0: mmc0:5048 SD32G 29.7 GiB (quirks 0x00004000) [ 3.367604] Indeed it is in host mode hprt0 = 00021501 [ 3.448570] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.448719] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.457639] devtmpfs: mounted [ 3.464643] Freeing unused kernel image (initmem) memory: 1024K [ 3.465134] Run /sbin/init as init process [ 3.465154] with arguments: [ 3.465175] /sbin/init [ 3.465188] splash [ 3.465199] with environment: [ 3.465209] HOME=/ [ 3.465220] TERM=linux [ 3.576991] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.577209] Indeed it is in host mode hprt0 = 00001101 [ 3.817346] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.817411] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.818481] hub 1-1:1.0: USB hub found [ 3.818614] hub 1-1:1.0: 5 ports detected [ 4.078347] systemd[1]: System time before build time, advancing clock. [ 4.137065] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.267423] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.267480] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.270686] smsc95xx v2.0.0 [ 4.368698] NET: Registered PF_INET6 protocol family [ 4.370872] Segment Routing with IPv6 [ 4.370939] In-situ OAM (IOAM) with IPv6 [ 4.419987] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199) [ 4.421452] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:01:7f:3c [ 4.458064] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.459482] systemd[1]: Detected architecture arm. [ 4.461870] systemd[1]: Set hostname to . [ 4.516992] usb 1-1.4: new full-speed USB device number 4 using dwc_otg [ 4.649808] usb 1-1.4: New USB device found, idVendor=1bc0, idProduct=8101, bcdDevice= 1.00 [ 4.649917] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=3 [ 4.649986] usb 1-1.4: SerialNumber: DTKS05981707 [ 4.668285] hid-generic 0003:1BC0:8101.0001: hiddev96,hidraw0: USB HID v1.11 Device [HID 1bc0:8101] on usb-3f980000.usb-1.4/input0 [ 4.747537] uart-pl011 3f201000.serial: no DMA platform data [ 5.610805] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 5.950332] systemd[1]: Queued start job for default target Graphical Interface. [ 5.992230] systemd[1]: Created slice system-getty.slice. [ 5.994710] systemd[1]: Created slice system-modprobe.slice. [ 5.996357] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.998206] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.999483] systemd[1]: Created slice User and Session Slice. [ 6.000320] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.001992] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.003569] systemd[1]: Reached target Slices. [ 6.003978] systemd[1]: Reached target Swap. [ 6.009151] systemd[1]: Listening on Syslog Socket. [ 6.010408] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.011127] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.012947] systemd[1]: Listening on Journal Audit Socket. [ 6.014180] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.015490] systemd[1]: Listening on Journal Socket. [ 6.023411] systemd[1]: Listening on udev Control Socket. [ 6.024637] systemd[1]: Listening on udev Kernel Socket. [ 6.026416] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.067647] systemd[1]: Mounting POSIX Message Queue File System... [ 6.074731] systemd[1]: Mounting RPC Pipe File System... [ 6.084394] systemd[1]: Mounting Kernel Debug File System... [ 6.094651] systemd[1]: Mounting Kernel Trace File System... [ 6.096154] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 6.113866] systemd[1]: Starting Restore / save the current clock... [ 6.127649] systemd[1]: Starting Set the console keyboard layout... [ 6.137851] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.148003] systemd[1]: Starting Load Kernel Module configfs... [ 6.159430] systemd[1]: Starting Load Kernel Module drm... [ 6.171162] systemd[1]: Starting Load Kernel Module fuse... [ 6.178978] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.192402] systemd[1]: Starting File System Check on Root Device... [ 6.210760] systemd[1]: Starting Journal Service... [ 6.231588] systemd[1]: Starting Load Kernel Modules... [ 6.248200] systemd[1]: Starting Coldplug All udev Devices... [ 6.298004] systemd[1]: Mounted POSIX Message Queue File System. [ 6.299517] systemd[1]: Mounted RPC Pipe File System. [ 6.301004] systemd[1]: Mounted Kernel Debug File System. [ 6.302442] systemd[1]: Mounted Kernel Trace File System. [ 6.317279] systemd[1]: Finished Restore / save the current clock. [ 6.321310] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.325003] systemd[1]: modprobe@configfs.service: Succeeded. [ 6.341109] systemd[1]: Finished Load Kernel Module configfs. [ 6.397711] fuse: init (API version 7.37) [ 6.408157] systemd[1]: Mounting Kernel Configuration File System... [ 6.429040] systemd[1]: Started File System Check Daemon to report status. [ 6.434660] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.436624] systemd[1]: Finished Load Kernel Module fuse. [ 6.458478] i2c_dev: i2c /dev entries driver [ 6.498716] systemd[1]: Mounting FUSE Control File System... [ 6.567535] systemd[1]: Finished Load Kernel Modules. [ 6.569755] systemd[1]: Mounted Kernel Configuration File System. [ 6.570922] systemd[1]: Mounted FUSE Control File System. [ 6.608675] systemd[1]: Starting Apply Kernel Variables... [ 6.612259] systemd[1]: modprobe@drm.service: Succeeded. [ 6.613960] systemd[1]: Finished Load Kernel Module drm. [ 6.669867] systemd[1]: Finished Apply Kernel Variables. [ 6.706163] systemd[1]: Finished File System Check on Root Device. [ 6.713475] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.737685] systemd[1]: Started Journal Service. [ 6.983586] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [ 7.134312] systemd-journald[130]: Received client request to flush runtime journal. [ 7.229193] systemd-journald[130]: File /var/log/journal/9ea8266cc172449094aeb6e56e88f765/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 9.016220] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 9.038177] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 9.038237] [vc_sm_connected_init]: start [ 9.039263] mc: Linux media interface: v0.10 [ 9.041031] [vc_sm_connected_init]: installed successfully [ 9.294686] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 9.303564] videodev: Linux video capture interface: v2.00 [ 9.340065] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.409093] i2c i2c-11: Added multiplexed i2c bus 0 [ 9.410521] i2c i2c-11: Added multiplexed i2c bus 10 [ 9.515225] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.582731] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.657751] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.669958] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 9.695791] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 9.699265] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 9.701030] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 9.705744] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 9.709581] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 9.709650] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.709684] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.709710] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.709734] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.719995] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 9.721603] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 9.722619] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 9.723220] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 9.723283] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.723322] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.723348] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.723371] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.723753] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 9.736461] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 9.736555] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 9.740388] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 9.740485] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 9.747388] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 9.747537] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 9.772360] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 9.772475] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 9.779998] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 9.780082] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 10.597578] Console: switching to colour dummy device 80x30 [ 10.610087] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 10.638812] Registered IR keymap rc-cec [ 10.639148] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 10.641307] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 10.686409] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 10.690871] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 10.693973] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 10.694786] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 10.700205] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 10.701111] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 10.751401] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 10.758131] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes [ 11.952831] ov5647: probe of 10-0036 failed with error -121 [ 12.626097] 8021q: 802.1Q VLAN Support v1.8 [ 12.918794] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 13.342765] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.500590] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.522666] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 13.766790] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 13.772501] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 13.772694] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.846564] systemd-journald[130]: File /var/log/journal/9ea8266cc172449094aeb6e56e88f765/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. ** sudo vcdbg log msg ** Failed to allocate -385826387 bytes for message buffer ** sudo vcdbg log assert ** Failed to allocate -385826387 bytes for message buffer ** sudo vcdbg log ex ** No exceptions found -------------------------------------------------------------------------------- Memory -------------------------------------------------------------------------------- ** cat /proc/meminfo ** MemTotal: 944100 kB MemFree: 380140 kB MemAvailable: 801736 kB Buffers: 107496 kB Cached: 340392 kB SwapCached: 0 kB Active: 231040 kB Inactive: 258164 kB Active(anon): 808 kB Inactive(anon): 41624 kB Active(file): 230232 kB Inactive(file): 216540 kB Unevictable: 16 kB Mlocked: 16 kB SwapTotal: 102396 kB SwapFree: 102396 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 100 kB Writeback: 0 kB AnonPages: 41480 kB Mapped: 59232 kB Shmem: 1100 kB KReclaimable: 39756 kB Slab: 55228 kB SReclaimable: 39756 kB SUnreclaim: 15472 kB KernelStack: 1380 kB PageTables: 2056 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 574444 kB Committed_AS: 412924 kB VmallocTotal: 1114112 kB VmallocUsed: 6264 kB VmallocChunk: 0 kB Percpu: 416 kB CmaTotal: 262144 kB CmaFree: 236012 kB ** sudo cat /sys/kernel/debug/dma_buf/bufinfo ** Dma-buf Objects: size flags mode count exp_name ino name Total 0 objects, 0 bytes ** sudo cat /sys/kernel/debug/vcsm-cma/state ** VC-ServiceHandle b4a8da51 Resources Total resource count: 0 -------------------------------------------------------------------------------- Media Devices -------------------------------------------------------------------------------- ** media-ctl -d 0 -p ** Media controller API version 6.1.21 Media device information ------------------------ driver bcm2835-isp model bcm2835-isp serial bus info platform:bcm2835-isp hw revision 0x0 driver version 6.1.21 Device topology - entity 1: bcm2835_isp0 (4 pads, 4 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-isp0-output0":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-isp0-capture1":0 [ENABLED,IMMUTABLE] pad2: Source -> "bcm2835-isp0-capture2":0 [ENABLED,IMMUTABLE] pad3: Source -> "bcm2835-isp0-capture3":0 [ENABLED,IMMUTABLE] - entity 6: bcm2835-isp0-output0 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video13 pad0: Source -> "bcm2835_isp0":0 [ENABLED,IMMUTABLE] - entity 12: bcm2835-isp0-capture1 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video14 pad0: Sink <- "bcm2835_isp0":1 [ENABLED,IMMUTABLE] - entity 18: bcm2835-isp0-capture2 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video15 pad0: Sink <- "bcm2835_isp0":2 [ENABLED,IMMUTABLE] - entity 24: bcm2835-isp0-capture3 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video16 pad0: Sink <- "bcm2835_isp0":3 [ENABLED,IMMUTABLE] ** media-ctl -d 1 -p ** Media controller API version 6.1.21 Media device information ------------------------ driver bcm2835-isp model bcm2835-isp serial bus info platform:bcm2835-isp hw revision 0x0 driver version 6.1.21 Device topology - entity 1: bcm2835_isp0 (4 pads, 4 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-isp0-output0":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-isp0-capture1":0 [ENABLED,IMMUTABLE] pad2: Source -> "bcm2835-isp0-capture2":0 [ENABLED,IMMUTABLE] pad3: Source -> "bcm2835-isp0-capture3":0 [ENABLED,IMMUTABLE] - entity 6: bcm2835-isp0-output0 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video20 pad0: Source -> "bcm2835_isp0":0 [ENABLED,IMMUTABLE] - entity 12: bcm2835-isp0-capture1 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video21 pad0: Sink <- "bcm2835_isp0":1 [ENABLED,IMMUTABLE] - entity 18: bcm2835-isp0-capture2 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video22 pad0: Sink <- "bcm2835_isp0":2 [ENABLED,IMMUTABLE] - entity 24: bcm2835-isp0-capture3 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video23 pad0: Sink <- "bcm2835_isp0":3 [ENABLED,IMMUTABLE] ** media-ctl -d 2 -p ** Media controller API version 6.1.21 Media device information ------------------------ driver bcm2835-codec model bcm2835-codec serial 0000 bus info platform:bcm2835-codec hw revision 0x1 driver version 6.1.21 Device topology - entity 1: bcm2835-codec-decode-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video10 pad0: Source -> "bcm2835-codec-decode-proc":0 [ENABLED,IMMUTABLE] - entity 3: bcm2835-codec-decode-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-decode-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-decode-sink":0 [ENABLED,IMMUTABLE] - entity 6: bcm2835-codec-decode-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video10 pad0: Sink <- "bcm2835-codec-decode-proc":1 [ENABLED,IMMUTABLE] - entity 15: bcm2835-codec-encode-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video11 pad0: Source -> "bcm2835-codec-encode-proc":0 [ENABLED,IMMUTABLE] - entity 17: bcm2835-codec-encode-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-encode-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-encode-sink":0 [ENABLED,IMMUTABLE] - entity 20: bcm2835-codec-encode-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video11 pad0: Sink <- "bcm2835-codec-encode-proc":1 [ENABLED,IMMUTABLE] - entity 29: bcm2835-codec-isp-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video12 pad0: Source -> "bcm2835-codec-isp-proc":0 [ENABLED,IMMUTABLE] - entity 31: bcm2835-codec-isp-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-isp-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-isp-sink":0 [ENABLED,IMMUTABLE] - entity 34: bcm2835-codec-isp-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video12 pad0: Sink <- "bcm2835-codec-isp-proc":1 [ENABLED,IMMUTABLE] - entity 43: bcm2835-codec-image_fx-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video18 pad0: Source -> "bcm2835-codec-image_fx-proc":0 [ENABLED,IMMUTABLE] - entity 45: bcm2835-codec-image_fx-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-image_fx-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-image_fx-sink":0 [ENABLED,IMMUTABLE] - entity 48: bcm2835-codec-image_fx-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video18 pad0: Sink <- "bcm2835-codec-image_fx-proc":1 [ENABLED,IMMUTABLE] - entity 57: bcm2835-codec-encode_image-sour (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video31 pad0: Source -> "bcm2835-codec-encode_image-proc":0 [ENABLED,IMMUTABLE] - entity 59: bcm2835-codec-encode_image-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-encode_image-sour":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-encode_image-sink":0 [ENABLED,IMMUTABLE] - entity 62: bcm2835-codec-encode_image-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video31 pad0: Sink <- "bcm2835-codec-encode_image-proc":1 [ENABLED,IMMUTABLE] ** media-ctl -d 3 -p ** Media controller API version 6.1.21 Media device information ------------------------ driver unicam model unicam serial bus info platform:3f801000.csi hw revision 0x0 driver version 6.1.21 Device topology ** media-ctl -d 4 -p ** Failed to enumerate /dev/media4 (-2) -------------------------------------------------------------------------------- Cameras -------------------------------------------------------------------------------- ** libcamera-hello --list-cameras ** No cameras available! -------------------------------------------------------------------------------- Versions -------------------------------------------------------------------------------- ** uname -a ** Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux ** cat /etc/os-release ** PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" ** vcgencmd version ** Mar 17 2023 10:52:42 Copyright (c) 2012 Broadcom version 82f3750a65fadae9a38077e3c2e217ad158c8d54 (clean) (release) (start) ** libcamera-hello --version ** libcamera-apps build: 7e4d3d71867f 17-07-2023 (07:34:42) libcamera build: v0.0.5+83-bde9b04f -------------------------------------------------------------------------------- libcamera-hello -t 5000 -------------------------------------------------------------------------------- Preview window unavailable [0:19:10.342061396] [1078]  INFO Camera camera_manager.cpp:297 libcamera v0.0.5+83-bde9b04f ERROR: *** no cameras available ***