[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] cma: Reserved 256 MiB at 0x20000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 241664 [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map ba726000 [ 0.000000] Normal zone: 2124 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 12 pages/cpu @ba6e7000 s20416 r8192 d20544 u49152 [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ 0.000000] Kernel command line: 8250.nr_uarts=1 cma=256M@512M dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1200 bcm2709.boardrev=0xa02082 bcm2709.serial=0x2fd43313 smsc95xx.macaddr=B8:27:EB:D4:33:13 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 684924K/966656K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 19588K reserved, 262144K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff000000 (1080 MB) lowmem : 0x80000000 - 0xbb000000 ( 944 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x807945f0 (7730 kB) .init : 0x80795000 - 0x80804000 ( 444 kB) .data : 0x80804000 - 0x80889b10 ( 535 kB) .bss : 0x8088c000 - 0x809497dc ( 758 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:608 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000025] Switching to timer-based delay loop, resolution 52ns [ 0.000239] Console: colour dummy device 80x30 [ 0.001285] console [tty1] enabled [ 0.001336] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001404] pid_max: default: 32768 minimum: 301 [ 0.001724] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001767] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002764] Initializing cgroup subsys blkio [ 0.002811] Initializing cgroup subsys memory [ 0.002857] Initializing cgroup subsys devices [ 0.002898] Initializing cgroup subsys freezer [ 0.002947] Initializing cgroup subsys net_cls [ 0.003018] CPU: Testing write buffer coherency: ok [ 0.003104] ftrace: allocating 20313 entries in 60 pages [ 0.048845] CPU0: update cpu_capacity 1024 [ 0.048912] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.048947] [bcm2709_smp_prepare_cpus] enter [ 0.049098] Setting up static identity map for 0x8240 - 0x8274 [ 0.050878] [bcm2709_boot_secondary] cpu:1 started (0) 18 [ 0.051102] [bcm2709_secondary_init] enter cpu:1 [ 0.051143] CPU1: update cpu_capacity 1024 [ 0.051149] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.051531] [bcm2709_boot_secondary] cpu:2 started (0) 17 [ 0.051696] [bcm2709_secondary_init] enter cpu:2 [ 0.051718] CPU2: update cpu_capacity 1024 [ 0.051724] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.052087] [bcm2709_boot_secondary] cpu:3 started (0) 17 [ 0.052218] [bcm2709_secondary_init] enter cpu:3 [ 0.052239] CPU3: update cpu_capacity 1024 [ 0.052245] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.052307] Brought up 4 CPUs [ 0.052405] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.052434] CPU: All CPU(s) started in HYP mode. [ 0.052460] CPU: Virtualization extensions available. [ 0.053165] devtmpfs: initialized [ 0.072243] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.072519] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.083290] pinctrl core: initialized pinctrl subsystem [ 0.083879] NET: Registered protocol family 16 [ 0.089077] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.090072] bcm2709.uart_clock = 48000000 [ 0.095866] bcm2709: Mini UART enabled [ 0.095935] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.095982] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.096163] Serial: AMBA PL011 UART driver [ 0.096227] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.096443] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.159702] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35 [ 0.159774] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy) [ 0.160371] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver [ 0.160408] bcm2708-dmaengine 3f007000.dma: dma_debug:0 [ 0.161009] SCSI subsystem initialized [ 0.161213] usbcore: registered new interface driver usbfs [ 0.161327] usbcore: registered new interface driver hub [ 0.161450] usbcore: registered new device driver usb [ 0.162031] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47 [ 0.189124] Switched to clocksource arch_sys_counter [ 0.230559] FS-Cache: Loaded [ 0.230851] CacheFiles: Loaded [ 0.240110] NET: Registered protocol family 2 [ 0.241081] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.241222] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.241433] TCP: Hash tables configured (established 8192 bind 8192) [ 0.241549] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.241617] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.241950] NET: Registered protocol family 1 [ 0.242271] RPC: Registered named UNIX socket transport module. [ 0.242304] RPC: Registered udp transport module. [ 0.242331] RPC: Registered tcp transport module. [ 0.242359] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.243414] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.244527] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.257982] VFS: Disk quotas dquot_6.6.0 [ 0.258275] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.260370] FS-Cache: Netfs 'nfs' registered for caching [ 0.261317] NFS: Registering the id_resolver key type [ 0.261380] Key type id_resolver registered [ 0.261408] Key type id_legacy registered [ 0.263495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.263674] io scheduler noop registered [ 0.263713] io scheduler deadline registered (default) [ 0.264014] io scheduler cfq registered [ 0.265554] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.267147] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 29, base_baud = 50000000) is a 16550 [ 0.268091] vc-cma: Videocore CMA driver [ 0.268121] vc-cma: vc_cma_base = 0x00000000 [ 0.268150] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.268179] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.268364] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 0.279873] brd: module loaded [ 0.286814] loop: module loaded [ 0.288437] vchiq: vchiq_init_state: slot_zero = 0xa0400000, is_master = 0 [ 0.289914] Loading iSCSI transport class v2.0-870. [ 0.290594] usbcore: registered new interface driver smsc95xx [ 0.290664] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.490992] Core Release: 2.80a [ 0.491023] Setting default values for core params [ 0.491076] Finished setting default values for core params [ 0.691444] Using Buffer DMA mode [ 0.691473] Periodic Transfer Interrupt Enhancement - disabled [ 0.691502] Multiprocessor Interrupt Enhancement - disabled [ 0.691532] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.691564] Dedicated Tx FIFOs mode [ 0.691835] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xa0448000 dma = 0xe0448000 len=9024 [ 0.691903] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints [ 0.691994] dwc_otg: Microframe scheduler enabled [ 0.692038] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288 [ 0.692073] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36 [ 0.692108] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89c000 [ 0.692163] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.692219] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.692286] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000 [ 0.692356] Init: Port Power? op_state=1 [ 0.692382] Init: Power Port (0) [ 0.692586] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.692624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.692671] usb usb1: Product: DWC OTG Controller [ 0.692702] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd [ 0.692734] usb usb1: SerialNumber: 3f980000.usb [ 0.693403] hub 1-0:1.0: USB hub found [ 0.693466] hub 1-0:1.0: 1 port detected [ 0.693860] dwc_otg: FIQ enabled [ 0.693869] dwc_otg: NAK holdoff enabled [ 0.693877] dwc_otg: FIQ split-transaction FSM enabled [ 0.693908] Module dwc_common_port init [ 0.694165] usbcore: registered new interface driver usb-storage [ 0.694382] mousedev: PS/2 mouse device common for all mice [ 0.695122] bcm2835-cpufreq: min=600000 max=1200000 [ 0.695419] sdhci: Secure Digital Host Controller Interface driver [ 0.695450] sdhci: Copyright(c) Pierre Ossman [ 0.695765] sdhost: log_buf @ a0446000 (e0446000) [ 0.769159] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.791637] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.791674] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 0.829230] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.829626] ledtrig-cpu: registered to indicate activity on CPUs [ 0.829790] hidraw: raw HID events driver (C) Jiri Kosina [ 0.829826] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.830006] usbcore: registered new interface driver usbhid [ 0.830036] usbhid: USB HID core driver [ 0.831345] Initializing XFRM netlink socket [ 0.831396] NET: Registered protocol family 17 [ 0.831539] Key type dns_resolver registered [ 0.831985] Registering SWP/SWPB emulation handler [ 0.832668] registered taskstats version 1 [ 0.832682] mmc0: new high speed SDHC card at address 0001 [ 0.832912] vc-sm: Videocore shared memory driver [ 0.832948] [vc_sm_connected_init]: start [ 0.833127] mmcblk0: mmc0:0001 00000 29.8 GiB [ 0.833514] [vc_sm_connected_init]: end - returning 0 [ 0.834397] mmcblk0: p1 p2 [ 0.834954] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2 [ 0.852585] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.854169] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.855741] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.858542] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.860626] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 0.860710] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.861521] devtmpfs: mounted [ 0.862234] Freeing unused kernel memory: 444K (80795000 - 80804000) [ 0.889236] Indeed it is in host mode hprt0 = 00021501 [ 0.949402] mmc1: new high speed SDIO card at address 0001 [ 1.069172] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.069352] Indeed it is in host mode hprt0 = 00001101 [ 1.243912] random: systemd urandom read with 38 bits of entropy available [ 1.247344] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 1.247745] systemd[1]: Detected architecture 'arm'. [ 1.269439] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.269483] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.270198] hub 1-1:1.0: USB hub found [ 1.270314] hub 1-1:1.0: 5 ports detected [ 1.397867] NET: Registered protocol family 10 [ 1.399179] systemd[1]: Inserted module 'ipv6' [ 1.402388] systemd[1]: Set hostname to . [ 1.549188] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.649484] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 1.649535] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.652290] smsc95xx v1.0.4 [ 1.712409] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d4:33:13 [ 1.772260] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.772686] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.772805] systemd[1]: Starting Remote File Systems (Pre). [ 1.773236] systemd[1]: Reached target Remote File Systems (Pre). [ 1.773347] systemd[1]: Starting Encrypted Volumes. [ 1.773603] systemd[1]: Reached target Encrypted Volumes. [ 1.773776] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.774417] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.774538] systemd[1]: Starting Swap. [ 1.774790] systemd[1]: Reached target Swap. [ 1.774887] systemd[1]: Expecting device dev-mmcblk0p1.device... [ 1.775127] systemd[1]: Starting Root Slice. [ 1.775445] systemd[1]: Created slice Root Slice. [ 1.775537] systemd[1]: Starting User and Session Slice. [ 1.775947] systemd[1]: Created slice User and Session Slice. [ 1.776043] systemd[1]: Starting Delayed Shutdown Socket. [ 1.776388] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.776483] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.776857] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.776953] systemd[1]: Starting Journal Socket (/dev/log). [ 1.777324] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.777440] systemd[1]: Starting udev Control Socket. [ 1.777781] systemd[1]: Listening on udev Control Socket. [ 1.777891] systemd[1]: Starting udev Kernel Socket. [ 1.778200] systemd[1]: Listening on udev Kernel Socket. [ 1.778318] systemd[1]: Starting Journal Socket. [ 1.778699] systemd[1]: Listening on Journal Socket. [ 1.778859] systemd[1]: Starting System Slice. [ 1.779307] systemd[1]: Created slice System Slice. [ 1.779453] systemd[1]: Starting File System Check on Root Device... [ 1.781935] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 1.782731] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 1.782930] systemd[1]: Starting system-autologin.slice. [ 1.783505] systemd[1]: Created slice system-autologin.slice. [ 1.783714] systemd[1]: Starting Increase datagram queue length... [ 1.786404] systemd[1]: Starting Restore / save the current clock... [ 1.796892] systemd[1]: Mounted Huge Pages File System. [ 1.811584] systemd[1]: Starting Load Kernel Modules... [ 1.814756] systemd[1]: Mounting POSIX Message Queue File System... [ 1.834360] systemd[1]: Started Set Up Additional Binary Formats. [ 1.834913] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.838097] systemd[1]: Mounting Debug File System... [ 1.841007] systemd[1]: Starting udev Coldplug all Devices... [ 1.844558] systemd[1]: Starting Slices. [ 1.844871] systemd[1]: Reached target Slices. [ 1.910352] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.931348] fuse init (API version 7.23) [ 1.941755] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.949209] usb 1-1.4: new low-speed USB device number 4 using dwc_otg [ 1.981043] systemd[1]: Mounted Debug File System. [ 1.981900] systemd[1]: Mounted POSIX Message Queue File System. [ 1.985016] systemd[1]: Started Increase datagram queue length. [ 1.985755] i2c /dev entries driver [ 1.990941] systemd[1]: Started Load Kernel Modules. [ 2.042625] systemd[1]: Started udev Coldplug all Devices. [ 2.065806] systemd[1]: Started Restore / save the current clock. [ 2.077220] systemd[1]: Time has been changed [ 2.081857] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=0024 [ 2.081907] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.081957] usb 1-1.4: Product: HP Basic USB Keyboard [ 2.081989] usb 1-1.4: Manufacturer: CHICONY [ 2.101387] input: CHICONY HP Basic USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:0024.0001/input/input0 [ 2.118118] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.141285] systemd[1]: Starting udev Kernel Device Manager... [ 2.144473] systemd[1]: Mounting Configuration File System... [ 2.147032] systemd[1]: Starting Apply Kernel Variables... [ 2.150155] systemd[1]: Mounting FUSE Control File System... [ 2.153023] systemd[1]: Starting Syslog Socket. [ 2.153560] systemd[1]: Listening on Syslog Socket. [ 2.153896] systemd[1]: Starting Journal Service... [ 2.157628] systemd[1]: Started Journal Service. [ 2.160697] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-3f980000.usb-1.4/input0 [ 2.175739] systemd-udevd[102]: starting version 215 [ 2.239241] usb 1-1.5: new low-speed USB device number 5 using dwc_otg [ 2.344390] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c077 [ 2.344417] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.344430] usb 1-1.5: Product: USB Optical Mouse [ 2.344443] usb 1-1.5: Manufacturer: Logitech [ 2.348863] input: Logitech USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C077.0002/input/input1 [ 2.349334] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3f980000.usb-1.5/input0 [ 2.877293] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 2.891460] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 2.891498] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.020728] [drm] Initialized drm 1.1.0 20060810 [ 3.135288] cfg80211: Calling CRDA to update world regulatory domain [ 3.194854] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.194889] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.206175] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24 [ 3.207053] usbcore: registered new interface driver brcmfmac [ 3.207747] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.207765] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.390826] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c [ 3.414239] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 3.621501] bcm2835-rng 3f104000.rng: hwrng registered [ 3.622589] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.622615] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.625334] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 3.625613] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.625632] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.627997] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000) [ 3.628422] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.628441] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.631365] bcm2708_i2c 3f805000.i2c: BSC2 Controller at 0x3f805000 (irq 79) (baudrate 100000) [ 3.631646] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.631664] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.632896] bcm2708-i2s 3f203000.i2s: can't request region for resource [mem 0x3f101098-0x3f10109f] [ 3.633026] bcm2708-i2s: probe of 3f203000.i2s failed with error -16 [ 3.640373] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.640405] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.643138] systemd-journald[106]: Received request to flush runtime journal from PID 1 [ 3.643212] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.643228] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.643558] vc4-drm soc:gpu@7e4c0000: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.643700] vc4-drm soc:gpu@7e4c0000: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.643792] vc4-drm soc:gpu@7e4c0000: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.643883] vc4-drm soc:gpu@7e4c0000: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.643942] vc4-drm soc:gpu@7e4c0000: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 3.644280] vc4-drm soc:gpu@7e4c0000: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 3.652204] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.652225] [drm] No driver support for vblank timestamp query. [ 3.709346] Console: switching to colour frame buffer device 240x75 [ 3.738564] vc4-drm soc:gpu@7e4c0000: fb0: frame buffer device [ 3.738571] vc4-drm soc:gpu@7e4c0000: registered panic notifier [ 3.792423] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.792441] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.809591] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered [ 3.809609] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517 [ 3.972308] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 3.972336] cfg80211: World regulatory domain updated: [ 3.972343] cfg80211: DFS Master region: unset [ 3.972349] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3.972356] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3.972366] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3.972376] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3.972384] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3.972391] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3.972398] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3.972404] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3.972410] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 4.184589] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists [ 4.184603] brcmfmac: brcmf_add_if: ignore IF event [ 4.188470] brcmfmac: power management disabled [ 4.221875] uart-pl011 3f201000.uart: no DMA platform data [ 4.347332] random: nonblocking pool is initialized [ 4.480293] Adding 102396k swap on /var/swap. Priority:-1 extents:3 across:1773568k SSFS [ 4.582141] cfg80211: Calling CRDA for country: GB [ 4.597372] cfg80211: Regulatory domain changed to country: GB [ 4.597389] cfg80211: DFS Master region: ETSI [ 4.597394] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.597403] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.597411] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.597419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.597425] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 4.597432] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 4.921155] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 4.921513] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.540148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.542812] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 8.614672] Bluetooth: Core ver 2.20 [ 8.614742] NET: Registered protocol family 31 [ 8.614747] Bluetooth: HCI device and connection manager initialized [ 8.614763] Bluetooth: HCI socket layer initialized [ 8.614775] Bluetooth: L2CAP socket layer initialized [ 8.614795] Bluetooth: SCO socket layer initialized [ 8.622239] Bluetooth: HCI UART driver ver 2.3 [ 8.622255] Bluetooth: HCI UART protocol H4 registered [ 8.622260] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.622265] Bluetooth: HCI UART protocol BCM registered [ 8.772638] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.772652] Bluetooth: BNEP filters: protocol multicast [ 8.772667] Bluetooth: BNEP socket layer initialized