/dts-v1/;

/ {
	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
	serial-number = "0000000044ab8b1c";
	model = "Raspberry Pi 3 Model B Rev 1.2";
	memreserve = <0x3b400000 0x4c00000>;
	interrupt-parent = <0x1>;
	#address-cells = <0x1>;
	#size-cells = <0x1>;

	clocks {
		compatible = "simple-bus";
		#address-cells = <0x1>;
		#size-cells = <0x0>;

		clock@3 {
			compatible = "fixed-clock";
			#clock-cells = <0x0>;
			phandle = <0x4>;
			reg = <0x3>;
			clock-output-names = "osc";
			clock-frequency = <0x124f800>;
		};

		clock@4 {
			compatible = "fixed-clock";
			#clock-cells = <0x0>;
			phandle = <0x18>;
			reg = <0x4>;
			clock-output-names = "otg";
			clock-frequency = <0x1c9c3800>;
		};
	};

	__overrides__ {
		pwr_led_gpio = "", "", "", "/gpios:4";
		i2c1 = "", "", "", "$status";
		i2c_vc = "", "", "", "#status";
		sd_overclock = "", "", "", "(brcm,overclock-50:0";
		i2c0_baudrate = "", "", "", "#clock-frequency:0";
		sd_pio_limit = "", "", "", "(brcm,pio-limit:0";
		act_led_trigger = "", "", "", ".linux,default-trigger";
		audio = "", "", "", "%status";
		sd_debug = "", "", "", "(brcm,debug";
		cache_line_size = [00 00 00 1e 63 61 63 68 65 2d 6c 69 6e 65 2d 73 69 7a 65 3a 30 00];
		i2c1_baudrate = "", "", "", "$clock-frequency:0";
		spi = "", "", "", "\"status";
		i2c_arm = "", "", "", "$status";
		pwr_led_activelow = "", "", "", "/gpios:8";
		uart0 = [00 00 00 1f 73 74 61 74 75 73 00];
		i2c2_iknowwhatimdoing = [00 00 00 16 73 74 61 74 75 73 00];
		i2s = "", "", "", "!status";
		i2c0 = "", "", "", "#status";
		arm_freq = "", "", "", "*clock-frequency:0", "", "", "", "+clock-frequency:0", "", "", "", ",clock-frequency:0", "", "", "", "-clock-frequency:0";
		watchdog = "", "", "", "&status";
		i2c_baudrate = "", "", "", "$clock-frequency:0";
		i2c_vc_baudrate = "", "", "", "#clock-frequency:0";
		axiperf = "", "", "", ")status";
		act_led_activelow = "", "", "", ".gpios:8";
		i2c2_baudrate = [00 00 00 16 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
		sd_force_pio = "", "", "", "(brcm,force-pio?";
		pwr_led_trigger = "", "", "", "/linux,default-trigger";
		uart1 = "", "", "", " status";
		i2c_arm_baudrate = "", "", "", "$clock-frequency:0";
		random = "", "", "", "'status";
		act_led_gpio = "", "", "", ".gpios:4";
		i2c = "", "", "", "$status";
	};

	system {
		linux,serial = <0x0 0x44ab8b1c>;
		linux,revision = <0xa02082>;
	};

	__symbols__ {
		uart0_gpio14 = "/soc/gpio@7e200000/uart0_gpio14";
		pwm = "/soc/pwm@7e20c000";
		gpclk1_gpio5 = "/soc/gpio@7e200000/gpclk1_gpio5";
		clk_usb = "/clocks/clock@4";
		pixelvalve0 = "/soc/pixelvalve@7e206000";
		uart0_ctsrts_gpio30 = "/soc/gpio@7e200000/uart0_ctsrts_gpio30";
		uart1_ctsrts_gpio16 = "/soc/gpio@7e200000/uart1_ctsrts_gpio16";
		uart0_gpio32 = "/soc/gpio@7e200000/uart0_gpio32";
		intc = "/soc/interrupt-controller@7e00b200";
		spi2 = "/soc/spi@7e2150c0";
		jtag_gpio4 = "/soc/gpio@7e200000/jtag_gpio4";
		dsi1 = "/soc/dsi@7e700000";
		clocks = "/soc/cprman@7e101000";
		i2c1 = "/soc/i2c@7e804000";
		i2c_vc = "/soc/i2c@7e205000";
		firmwarekms = "/soc/firmwarekms@7e600000";
		smi = "/soc/smi@7e600000";
		uart1_ctsrts_gpio42 = "/soc/gpio@7e200000/uart1_ctsrts_gpio42";
		spi0 = "/soc/spi@7e204000";
		thermal = "/soc/thermal@7e212000";
		vdd_5v0_reg = "/fixedregulator_5v0";
		vchiq = "/soc/vchiq";
		sdhost = "/soc/mmc@7e202000";
		aux = "/soc/aux@0x7e215000";
		gpio = "/soc/gpio@7e200000";
		gpclk0_gpio4 = "/soc/gpio@7e200000/gpclk0_gpio4";
		pwm0_gpio12 = "/soc/gpio@7e200000/pwm0_gpio12";
		pwm1_gpio19 = "/soc/gpio@7e200000/pwm1_gpio19";
		pwm0_gpio40 = "/soc/gpio@7e200000/pwm0_gpio40";
		gpclk2_gpio43 = "/soc/gpio@7e200000/gpclk2_gpio43";
		dpi = "/soc/dpi@7e208000";
		vcsm = "/soc/vcsm";
		v3d = "/soc/v3d@7ec00000";
		audio = "/soc/audio";
		vdd_3v3_reg = "/fixedregulator_3v3";
		uart1_ctsrts_gpio30 = "/soc/gpio@7e200000/uart1_ctsrts_gpio30";
		dma = "/soc/dma@7e007000";
		spidev1 = "/soc/spi@7e204000/spidev@1";
		spi0_gpio35 = "/soc/gpio@7e200000/spi0_gpio35";
		vc4 = "/soc/gpu";
		pwm1_gpio45 = "/soc/gpio@7e200000/pwm1_gpio45";
		cpu3 = "/cpus/cpu@3";
		pcm_gpio28 = "/soc/gpio@7e200000/pcm_gpio28";
		dpi_gpio0 = "/soc/gpio@7e200000/dpi_gpio0";
		power = "/soc/power";
		soc = "/soc";
		i2c0_gpio0 = "/soc/gpio@7e200000/i2c0_gpio0";
		pcm_gpio18 = "/soc/gpio@7e200000/pcm_gpio18";
		leds = "/leds";
		i2s_pins = "/soc/gpio@7e200000/i2s";
		firmware = "/soc/firmware";
		cpu1 = "/cpus/cpu@1";
		mmc = "/soc/mmc@7e300000";
		usbphy = "/phy";
		pixelvalve1 = "/soc/pixelvalve@7e207000";
		spi = "/soc/spi@7e204000";
		spi0_pins = "/soc/gpio@7e200000/spi0_pins";
		i2c_arm = "/soc/i2c@7e804000";
		clk_osc = "/clocks/clock@3";
		ethernet = "/soc/usb@7e980000/usb1@1/usbether@1";
		uart0 = "/soc/serial@7e201000";
		pwm1_gpio13 = "/soc/gpio@7e200000/pwm1_gpio13";
		i2c1_pins = "/soc/gpio@7e200000/i2c1";
		cpu_thermal = "/thermal-zones/cpu-thermal";
		fb = "/soc/fb";
		pwm1_gpio41 = "/soc/gpio@7e200000/pwm1_gpio41";
		sdhost_pins = "/soc/gpio@7e200000/sdhost_gpio48";
		spi0_gpio7 = "/soc/gpio@7e200000/spi0_gpio7";
		i2c2 = "/soc/i2c@7e805000";
		uart1_pins = "/soc/gpio@7e200000/uart1_pins";
		i2c1_gpio44 = "/soc/gpio@7e200000/i2c1_gpio44";
		i2c0_gpio28 = "/soc/gpio@7e200000/i2c0_gpio28";
		i2c_slave_gpio18 = "/soc/gpio@7e200000/i2c_slave_gpio18";
		i2s = "/soc/i2s@7e203000";
		emmc_gpio48 = "/soc/gpio@7e200000/emmc_gpio48";
		spi1 = "/soc/spi@7e215080";
		virtgpio = "/soc/virtgpio";
		usb = "/soc/usb@7e980000";
		dsi0 = "/soc/dsi@7e209000";
		i2c1_gpio2 = "/soc/gpio@7e200000/i2c1_gpio2";
		expgpio = "/soc/expgpio";
		uart0_ctsrts_gpio38 = "/soc/gpio@7e200000/uart0_ctsrts_gpio38";
		audio_pins = "/soc/gpio@7e200000/audio_pins";
		i2c0 = "/soc/i2c@7e205000";
		spi1_gpio16 = "/soc/gpio@7e200000/spi1_gpio16";
		i2c0_pins = "/soc/gpio@7e200000/i2c0";
		pwr_led = "/leds/pwr";
		watchdog = "/soc/watchdog@7e100000";
		jtag_gpio22 = "/soc/gpio@7e200000/jtag_gpio22";
		spi2_gpio40 = "/soc/gpio@7e200000/spi2_gpio40";
		uart0_pins = "/soc/gpio@7e200000/uart0_pins";
		vec = "/soc/vec@7e806000";
		local_intc = "/soc/local_intc";
		i2c0_gpio44 = "/soc/gpio@7e200000/i2c0_gpio44";
		i2c_dsi = "/soc/i2cdsi";
		axiperf = "/soc/axiperf";
		spi0_cs_pins = "/soc/gpio@7e200000/spi0_cs_pins";
		sound = "/soc/sound";
		hvs = "/soc/hvs@7e400000";
		uart0_ctsrts_gpio16 = "/soc/gpio@7e200000/uart0_ctsrts_gpio16";
		act_led = "/leds/act";
		gpclk2_gpio6 = "/soc/gpio@7e200000/gpclk2_gpio6";
		spidev0 = "/soc/spi@7e204000/spidev@0";
		sdhost_gpio48 = "/soc/gpio@7e200000/sdhost_gpio48";
		bt_pins = "/soc/gpio@7e200000/bt_pins";
		emmc_gpio34 = "/soc/gpio@7e200000/emmc_gpio34";
		gpclk1_gpio44 = "/soc/gpio@7e200000/gpclk1_gpio44";
		uart1_gpio14 = "/soc/gpio@7e200000/uart1_gpio14";
		uart0_gpio36 = "/soc/gpio@7e200000/uart0_gpio36";
		sdio_pins = "/soc/gpio@7e200000/sdio_pins";
		cpus = "/cpus";
		cpu2 = "/cpus/cpu@2";
		uart1_gpio32 = "/soc/gpio@7e200000/uart1_gpio32";
		hdmi = "/soc/hdmi@7e902000";
		pixelvalve2 = "/soc/pixelvalve@7e807000";
		pwm0_gpio18 = "/soc/gpio@7e200000/pwm0_gpio18";
		gpclk1_gpio42 = "/soc/gpio@7e200000/gpclk1_gpio42";
		mailbox = "/soc/mailbox@7e00b880";
		uart1_gpio40 = "/soc/gpio@7e200000/uart1_gpio40";
		emmc_gpio22 = "/soc/gpio@7e200000/emmc_gpio22";
		uart1 = "/soc/serial@7e215040";
		random = "/soc/rng@7e104000";
		i2c = "/soc/i2c@7e804000";
		cpu0 = "/cpus/cpu@0";
	};

	soc {
		compatible = "simple-bus";
		ranges = <0x7e000000 0x3f000000 0x1000000 0x40000000 0x40000000 0x1000>;
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		phandle = <0x31>;
		dma-ranges = <0xc0000000 0x0 0x3f000000>;

		serial@7e201000 {
			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
			clocks = <0x8 0x13 0x8 0x14>;
			clock-names = "uartclk", "apb_pclk";
			status = "okay";
			interrupts = <0x2 0x19>;
			phandle = <0x1f>;
			arm,primecell-periphid = <0x241011>;
			reg = <0x7e201000 0x1000>;
			pinctrl-0 = <0x9 0xa>;
			cts-event-workaround;
			pinctrl-names = "default";
		};

		pixelvalve@7e207000 {
			compatible = "brcm,bcm2835-pixelvalve1";
			status = "okay";
			interrupts = <0x2 0xe>;
			phandle = <0x60>;
			reg = <0x7e207000 0x100>;
		};

		cprman@7e101000 {
			compatible = "brcm,bcm2835-cprman";
			clocks = <0x4 0x5 0x0 0x5 0x1 0x5 0x2 0x6 0x0 0x6 0x1 0x6 0x2>;
			firmware = <0x7>;
			#clock-cells = <0x1>;
			phandle = <0x8>;
			claim-clocks = <0x22 0x23 0xf 0x10>;
			reg = <0x7e101000 0x2000>;
		};

		thermal@7e212000 {
			compatible = "brcm,bcm2837-thermal";
			clocks = <0x8 0x1b>;
			#thermal-sensor-cells = <0x0>;
			status = "okay";
			phandle = <0x2>;
			reg = <0x7e212000 0x8>;
		};

		hvs@7e400000 {
			compatible = "brcm,bcm2835-hvs";
			status = "okay";
			interrupts = <0x2 0x1>;
			phandle = <0x64>;
			reg = <0x7e400000 0x6000>;
		};

		gpio@7e200000 {
			compatible = "brcm,bcm2835-gpio";
			gpio-controller;
			#interrupt-cells = <0x2>;
			interrupts = <0x2 0x11 0x2 0x12>;
			phandle = <0x10>;
			reg = <0x7e200000 0xb4>;
			#gpio-cells = <0x2>;
			interrupt-controller;

			uart0_gpio14 {
				brcm,pins = <0xe 0xf>;
				phandle = <0x51>;
				brcm,function = <0x4>;
			};

			gpclk1_gpio5 {
				brcm,pins = <0x5>;
				phandle = <0x37>;
				brcm,function = <0x4>;
			};

			uart0_ctsrts_gpio30 {
				brcm,pins = <0x1e 0x1f>;
				phandle = <0x53>;
				brcm,function = <0x7>;
			};

			uart1_ctsrts_gpio16 {
				brcm,pins = <0x10 0x11>;
				phandle = <0x58>;
				brcm,function = <0x2>;
			};

			uart0_gpio32 {
				brcm,pins = <0x20 0x21>;
				phandle = <0x54>;
				brcm,function = <0x7>;
			};

			jtag_gpio4 {
				brcm,pins = <0x4 0x5 0x6 0xc 0xd>;
				phandle = <0x42>;
				brcm,function = <0x3>;
			};

			i2c1 {
				brcm,pins = <0x2 0x3>;
				phandle = <0x15>;
				brcm,function = <0x4>;
			};

			uart1_ctsrts_gpio42 {
				brcm,pins = <0x2a 0x2b>;
				phandle = <0x5c>;
				brcm,function = <0x2>;
			};

			gpclk0_gpio4 {
				brcm,pins = <0x4>;
				phandle = <0x36>;
				brcm,function = <0x4>;
			};

			pwm0_gpio12 {
				brcm,pins = <0xc>;
				phandle = <0x46>;
				brcm,function = <0x4>;
			};

			pwm1_gpio19 {
				brcm,pins = <0x13>;
				phandle = <0x4a>;
				brcm,function = <0x2>;
			};

			pwm0_gpio40 {
				brcm,pins = <0x28>;
				phandle = <0x48>;
				brcm,function = <0x4>;
			};

			gpclk2_gpio43 {
				brcm,pins = <0x2b>;
				phandle = <0x3b>;
				brcm,function = <0x4>;
			};

			uart1_ctsrts_gpio30 {
				brcm,pins = <0x1e 0x1f>;
				phandle = <0x5a>;
				brcm,function = <0x2>;
			};

			spi0_gpio35 {
				brcm,pins = <0x23 0x24 0x25 0x26 0x27>;
				phandle = <0x4e>;
				brcm,function = <0x4>;
			};

			pwm1_gpio45 {
				brcm,pins = <0x2d>;
				phandle = <0x4c>;
				brcm,function = <0x4>;
			};

			pcm_gpio28 {
				brcm,pins = <0x1c 0x1d 0x1e 0x1f>;
				phandle = <0x45>;
				brcm,function = <0x6>;
			};

			dpi_gpio0 {
				brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b>;
				phandle = <0x32>;
				brcm,function = <0x6>;
			};

			i2c0_gpio0 {
				brcm,pins = <0x0 0x1>;
				phandle = <0x3c>;
				brcm,function = <0x4>;
			};

			pcm_gpio18 {
				brcm,pins = <0x12 0x13 0x14 0x15>;
				phandle = <0x44>;
				brcm,function = <0x4>;
			};

			spi0_pins {
				brcm,pins = <0x9 0xa 0xb>;
				phandle = <0xe>;
				brcm,function = <0x4>;
			};

			pwm1_gpio13 {
				brcm,pins = <0xd>;
				phandle = <0x49>;
				brcm,function = <0x4>;
			};

			pwm1_gpio41 {
				brcm,pins = <0x29>;
				phandle = <0x4b>;
				brcm,function = <0x4>;
			};

			spi0_gpio7 {
				brcm,pins = <0x7 0x8 0x9 0xa 0xb>;
				phandle = <0x4d>;
				brcm,function = <0x4>;
			};

			uart1_pins {
				brcm,pins;
				phandle = <0x14>;
				brcm,pull;
				brcm,function;
			};

			i2c1_gpio44 {
				brcm,pins = <0x2c 0x2d>;
				phandle = <0x40>;
				brcm,function = <0x6>;
			};

			i2c0_gpio28 {
				brcm,pins = <0x1c 0x1d>;
				phandle = <0x3d>;
				brcm,function = <0x4>;
			};

			i2c_slave_gpio18 {
				brcm,pins = <0x12 0x13 0x14 0x15>;
				phandle = <0x41>;
				brcm,function = <0x7>;
			};

			i2s {
				brcm,pins = <0x12 0x13 0x14 0x15>;
				phandle = <0xd>;
				brcm,function = <0x4>;
			};

			emmc_gpio48 {
				brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>;
				phandle = <0x35>;
				brcm,function = <0x7>;
			};

			i2c1_gpio2 {
				brcm,pins = <0x2 0x3>;
				phandle = <0x3f>;
				brcm,function = <0x4>;
			};

			uart0_ctsrts_gpio38 {
				brcm,pins = <0x26 0x27>;
				phandle = <0x56>;
				brcm,function = <0x6>;
			};

			audio_pins {
				brcm,pins = <0x28 0x29>;
				phandle = <0x1c>;
				brcm,function = <0x4>;
			};

			i2c0 {
				brcm,pins = <0x0 0x1>;
				phandle = <0x11>;
				brcm,function = <0x4>;
			};

			spi1_gpio16 {
				brcm,pins = <0x10 0x11 0x12 0x13 0x14 0x15>;
				phandle = <0x4f>;
				brcm,function = <0x3>;
			};

			jtag_gpio22 {
				brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>;
				phandle = <0x43>;
				brcm,function = <0x3>;
			};

			spi2_gpio40 {
				brcm,pins = <0x28 0x29 0x2a 0x2b 0x2c 0x2d>;
				phandle = <0x50>;
				brcm,function = <0x3>;
			};

			uart0_pins {
				brcm,pins = <0x20 0x21>;
				phandle = <0x9>;
				brcm,pull = <0x0 0x2>;
				brcm,function = <0x7>;
			};

			i2c0_gpio44 {
				brcm,pins = <0x2c 0x2d>;
				phandle = <0x3e>;
				brcm,function = <0x5>;
			};

			spi0_cs_pins {
				brcm,pins = <0x8 0x7>;
				phandle = <0xf>;
				brcm,function = <0x1>;
			};

			uart0_ctsrts_gpio16 {
				brcm,pins = <0x10 0x11>;
				phandle = <0x52>;
				brcm,function = <0x7>;
			};

			gpclk2_gpio6 {
				brcm,pins = <0x6>;
				phandle = <0x3a>;
				brcm,function = <0x4>;
			};

			sdhost_gpio48 {
				brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>;
				phandle = <0xc>;
				brcm,function = <0x4>;
			};

			bt_pins {
				brcm,pins = <0x2b>;
				phandle = <0xa>;
				brcm,pull = <0x0>;
				brcm,function = <0x4>;
			};

			emmc_gpio34 {
				brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>;
				phandle = <0x34>;
				brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>;
				brcm,function = <0x7>;
			};

			gpclk1_gpio44 {
				brcm,pins = <0x2c>;
				phandle = <0x39>;
				brcm,function = <0x4>;
			};

			uart1_gpio14 {
				brcm,pins = <0xe 0xf>;
				phandle = <0x57>;
				brcm,function = <0x2>;
			};

			uart0_gpio36 {
				brcm,pins = <0x24 0x25>;
				phandle = <0x55>;
				brcm,function = <0x6>;
			};

			sdio_pins {
				brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>;
				phandle = <0x1a>;
				brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>;
				brcm,function = <0x7>;
			};

			uart1_gpio32 {
				brcm,pins = <0x20 0x21>;
				phandle = <0x59>;
				brcm,function = <0x2>;
			};

			pwm0_gpio18 {
				brcm,pins = <0x12>;
				phandle = <0x47>;
				brcm,function = <0x2>;
			};

			gpclk1_gpio42 {
				brcm,pins = <0x2a>;
				phandle = <0x38>;
				brcm,function = <0x4>;
			};

			uart1_gpio40 {
				brcm,pins = <0x28 0x29>;
				phandle = <0x5b>;
				brcm,function = <0x2>;
			};

			emmc_gpio22 {
				brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>;
				phandle = <0x33>;
				brcm,function = <0x7>;
			};
		};

		pixelvalve@7e807000 {
			compatible = "brcm,bcm2835-pixelvalve2";
			status = "okay";
			interrupts = <0x2 0xa>;
			phandle = <0x66>;
			reg = <0x7e807000 0x100>;
		};

		v3d@7ec00000 {
			power-domains = <0x12 0xa>;
			compatible = "brcm,vc4-v3d";
			status = "okay";
			interrupts = <0x1 0xa>;
			phandle = <0x6a>;
			reg = <0x7ec00000 0x1000>;
		};

		gpu {
			compatible = "brcm,bcm2835-vc4";
			status = "okay";
			phandle = <0x6b>;
		};

		mmc@7e300000 {
			compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
			clocks = <0x8 0x1c>;
			status = "okay";
			interrupts = <0x2 0x1e>;
			brcm,overclock-50 = <0x0>;
			bus-width = <0x4>;
			dma-names = "rx-tx";
			phandle = <0x6e>;
			reg = <0x7e300000 0x100>;
			pinctrl-0 = <0x1a>;
			dmas = <0xb 0xb>;
			non-removable;
			pinctrl-names = "default";
		};

		arm-pmu {
			compatible = "arm,cortex-a7-pmu";
			interrupt-parent = <0x3>;
			interrupts = <0x9>;
		};

		spi@7e204000 {
			compatible = "brcm,bcm2835-spi";
			clocks = <0x8 0x14>;
			status = "disabled";
			#address-cells = <0x1>;
			interrupts = <0x2 0x16>;
			cs-gpios = <0x10 0x8 0x1 0x10 0x7 0x1>;
			#size-cells = <0x0>;
			dma-names = "tx", "rx";
			phandle = <0x22>;
			reg = <0x7e204000 0x1000>;
			pinctrl-0 = <0xe 0xf>;
			dmas = <0xb 0x6 0xb 0x7>;
			pinctrl-names = "default";

			spidev@1 {
				compatible = "spidev";
				#address-cells = <0x1>;
				#size-cells = <0x0>;
				phandle = <0x5e>;
				reg = <0x1>;
				spi-max-frequency = <0x7735940>;
			};

			spidev@0 {
				compatible = "spidev";
				#address-cells = <0x1>;
				#size-cells = <0x0>;
				phandle = <0x5d>;
				reg = <0x0>;
				spi-max-frequency = <0x7735940>;
			};
		};

		i2cdsi {
			gpios = <0x10 0x2c 0x0 0x10 0x2d 0x0>;
			compatible = "i2c-gpio";
			status = "okay";
			#address-cells = <0x1>;
			#size-cells = <0x0>;
			phandle = <0x6c>;

			lcd@45 {
				compatible = "raspberrypi,7inch-touchscreen-panel";
				reg = <0x45>;

				port {

					endpoint {
						remote-endpoint = <0x79>;
						phandle = <0x78>;
					};
				};
			};
		};

		vchiq {
			compatible = "brcm,bcm2835-vchiq";
			cache-line-size = <0x40>;
			firmware = <0x7>;
			interrupts = <0x0 0x2>;
			phandle = <0x1e>;
			reg = <0x7e00b840 0xf>;
		};

		i2c@7e804000 {
			compatible = "brcm,bcm2835-i2c";
			clocks = <0x8 0x14>;
			status = "okay";
			#address-cells = <0x1>;
			interrupts = <0x2 0x15>;
			#size-cells = <0x0>;
			phandle = <0x24>;
			reg = <0x7e804000 0x1000>;
			clock-frequency = <0x186a0>;
			pinctrl-0 = <0x15>;
			pinctrl-names = "default";
		};

		vcsm {
			compatible = "raspberrypi,bcm2835-vcsm";
			firmware = <0x7>;
			status = "okay";
			phandle = <0x72>;
		};

		audio {
			brcm,pwm-channels = <0x8>;
			compatible = "brcm,bcm2835-audio";
			status = "okay";
			phandle = <0x25>;
			pinctrl-0 = <0x1c>;
			pinctrl-names = "default";
		};

		i2s@7e203000 {
			compatible = "brcm,bcm2835-i2s";
			clocks = <0x8 0x1f>;
			#sound-dai-cells = <0x0>;
			status = "disabled";
			dma-names = "tx", "rx";
			phandle = <0x21>;
			reg = <0x7e203000 0x24>;
			pinctrl-0 = <0xd>;
			dmas = <0xb 0x2 0xb 0x3>;
			pinctrl-names = "default";
		};

		mailbox@7e00b880 {
			compatible = "brcm,bcm2835-mbox";
			#mbox-cells = <0x0>;
			interrupts = <0x0 0x1>;
			phandle = <0x1b>;
			reg = <0x7e00b880 0x40>;
		};

		gpiomem {
			compatible = "brcm,bcm2835-gpiomem";
			reg = <0x7e200000 0x1000>;
		};

		vec@7e806000 {
			power-domains = <0x12 0x7>;
			compatible = "brcm,bcm2835-vec";
			clocks = <0x8 0x18>;
			status = "okay";
			interrupts = <0x2 0x1b>;
			phandle = <0x65>;
			reg = <0x7e806000 0x1000>;
		};

		power {
			compatible = "raspberrypi,bcm2835-power";
			firmware = <0x7>;
			phandle = <0x12>;
			#power-domain-cells = <0x1>;
		};

		pixelvalve@7e206000 {
			compatible = "brcm,bcm2835-pixelvalve0";
			status = "okay";
			interrupts = <0x2 0xd>;
			phandle = <0x5f>;
			reg = <0x7e206000 0x100>;
		};

		firmware {
			compatible = "raspberrypi,bcm2835-firmware";
			mboxes = <0x1b>;
			phandle = <0x7>;
		};

		dsi@7e209000 {
			power-domains = <0x12 0x11>;
			compatible = "brcm,bcm2835-dsi0";
			clocks = <0x8 0x20 0x8 0x2f 0x8 0x31>;
			clock-names = "phy", "escape", "pixel";
			status = "okay";
			#address-cells = <0x1>;
			interrupts = <0x2 0x4>;
			#size-cells = <0x0>;
			#clock-cells = <0x1>;
			phandle = <0x5>;
			reg = <0x7e209000 0x78>;
			clock-output-names = "dsi0_byte", "dsi0_ddr2", "dsi0_ddr";
		};

		fb {
			compatible = "brcm,bcm2708-fb";
			firmware = <0x7>;
			status = "disabled";
			phandle = <0x71>;
		};

		virtgpio {
			compatible = "brcm,bcm2835-virtgpio";
			gpio-controller;
			firmware = <0x7>;
			status = "okay";
			phandle = <0x1d>;
			#gpio-cells = <0x2>;
		};

		dpi@7e208000 {
			compatible = "brcm,bcm2835-dpi";
			clocks = <0x8 0x14 0x8 0x2c>;
			clock-names = "core", "pixel";
			status = "disabled";
			#address-cells = <0x1>;
			#size-cells = <0x0>;
			phandle = <0x6d>;
			reg = <0x7e208000 0x8c>;
		};

		mmc@7e202000 {
			compatible = "brcm,bcm2835-sdhost";
			clocks = <0x8 0x14>;
			brcm,pio-limit = <0x1>;
			status = "okay";
			interrupts = <0x2 0x18>;
			brcm,overclock-50 = <0x0>;
			bus-width = <0x4>;
			dma-names = "rx-tx";
			phandle = <0x28>;
			reg = <0x7e202000 0x100>;
			pinctrl-0 = <0xc>;
			dmas = <0xb 0xd>;
			pinctrl-names = "default";
		};

		expgpio {
			compatible = "brcm,bcm2835-expgpio";
			gpio-controller;
			firmware = <0x7>;
			status = "okay";
			phandle = <0x17>;
			#gpio-cells = <0x2>;
		};

		hdmi@7e902000 {
			power-domains = <0x12 0x5>;
			compatible = "brcm,bcm2835-hdmi";
			clocks = <0x8 0x10 0x8 0x19>;
			clock-names = "pixel", "hdmi";
			ddc = <0x16>;
			status = "okay";
			interrupts = <0x2 0x8 0x2 0x9>;
			dma-names = "audio-rx";
			phandle = <0x67>;
			hpd-gpios = <0x17 0x4 0x1>;
			reg = <0x7e902000 0x600 0x7e808000 0x100>;
			dmas = <0xb 0x11>;
		};

		pwm@7e20c000 {
			compatible = "brcm,bcm2835-pwm";
			clocks = <0x8 0x1e>;
			status = "disabled";
			assigned-clock-rates = <0x989680>;
			assigned-clocks = <0x8 0x1e>;
			phandle = <0x63>;
			reg = <0x7e20c000 0x28>;
			#pwm-cells = <0x2>;
		};

		watchdog@7e100000 {
			compatible = "brcm,bcm2835-pm-wdt";
			phandle = <0x26>;
			reg = <0x7e100000 0x28>;
		};

		interrupt-controller@7e00b200 {
			compatible = "brcm,bcm2836-armctrl-ic";
			#interrupt-cells = <0x2>;
			interrupt-parent = <0x3>;
			interrupts = <0x8>;
			phandle = <0x1>;
			reg = <0x7e00b200 0x200>;
			interrupt-controller;
		};

		local_intc {
			compatible = "brcm,bcm2836-l1-intc";
			#interrupt-cells = <0x1>;
			interrupt-parent = <0x3>;
			phandle = <0x3>;
			reg = <0x40000000 0x100>;
			interrupt-controller;
		};

		dsi@7e700000 {
			power-domains = <0x12 0x12>;
			compatible = "brcm,bcm2835-dsi1";
			clocks = <0x8 0x23 0x8 0x30 0x8 0x32>;
			clock-names = "phy", "escape", "pixel";
			status = "okay";
			#address-cells = <0x1>;
			interrupts = <0x2 0xc>;
			#size-cells = <0x0>;
			#clock-cells = <0x1>;
			phandle = <0x6>;
			reg = <0x7e700000 0x8c>;
			clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";

			port {

				endpoint {
					remote-endpoint = <0x78>;
					phandle = <0x79>;
				};
			};
		};

		axiperf {
			compatible = "brcm,bcm2835-axiperf";
			firmware = <0x7>;
			status = "disabled";
			phandle = <0x29>;
			reg = <0x7e009800 0x100 0x7ee08000 0x100>;
		};

		sound {
			status = "disabled";
			phandle = <0x73>;
		};

		i2c@7e205000 {
			compatible = "brcm,bcm2835-i2c";
			clocks = <0x8 0x14>;
			status = "disabled";
			#address-cells = <0x1>;
			interrupts = <0x2 0x15>;
			#size-cells = <0x0>;
			phandle = <0x23>;
			reg = <0x7e205000 0x1000>;
			clock-frequency = <0x186a0>;
			pinctrl-0 = <0x11>;
			pinctrl-names = "default";
		};

		serial@7e215040 {
			compatible = "brcm,bcm2835-aux-uart";
			clocks = <0x13 0x0>;
			status = "okay";
			interrupt-parent = <0x13>;
			interrupts = <0x0>;
			phandle = <0x20>;
			reg = <0x7e215040 0x40>;
			pinctrl-0 = <0x14>;
			pinctrl-names = "default";
		};

		dma@7e007000 {
			#dma-cells = <0x1>;
			compatible = "brcm,bcm2835-dma";
			brcm,dma-channel-mask = <0x7f35>;
			interrupts = <0x1 0x10 0x1 0x11 0x1 0x12 0x1 0x13 0x1 0x14 0x1 0x15 0x1 0x16 0x1 0x17 0x1 0x18 0x1 0x19 0x1 0x1a 0x1 0x1b 0x1 0x1b 0x1 0x1b 0x1 0x1b 0x1 0x1c>;
			phandle = <0xb>;
			reg = <0x7e007000 0xf00>;
			interrupt-names = "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7", "dma8", "dma9", "dma10", "dma11", "dma12", "dma13", "dma14", "dma-shared-all";
		};

		i2c@7e805000 {
			compatible = "brcm,bcm2835-i2c";
			clocks = <0x8 0x14>;
			status = "okay";
			#address-cells = <0x1>;
			interrupts = <0x2 0x15>;
			#size-cells = <0x0>;
			phandle = <0x16>;
			reg = <0x7e805000 0x1000>;
			clock-frequency = <0x186a0>;
		};

		spi@7e215080 {
			compatible = "brcm,bcm2835-aux-spi";
			clocks = <0x13 0x1>;
			status = "disabled";
			interrupt-parent = <0x13>;
			#address-cells = <0x1>;
			interrupts = <0x1>;
			#size-cells = <0x0>;
			phandle = <0x61>;
			reg = <0x7e215080 0x40>;
		};

		aux@0x7e215000 {
			compatible = "brcm,bcm2835-aux";
			clocks = <0x8 0x14>;
			#interrupt-cells = <0x1>;
			interrupts = <0x1 0x1d>;
			#clock-cells = <0x1>;
			phandle = <0x13>;
			reg = <0x7e215000 0x8>;
			interrupt-controller;
		};

		firmwarekms@7e600000 {
			compatible = "raspberrypi,rpi-firmware-kms";
			status = "disabled";
			interrupts = <0x2 0x10>;
			brcm,firmware = <0x7>;
			phandle = <0x6f>;
			reg = <0x7e600000 0x100>;
		};

		rng@7e104000 {
			compatible = "brcm,bcm2835-rng";
			phandle = <0x27>;
			reg = <0x7e104000 0x10>;
		};

		usb@7e980000 {
			power-domains = <0x12 0x6>;
			compatible = "brcm,bcm2708-usb";
			clocks = <0x18>;
			clock-names = "otg";
			phy-names = "usb2-phy";
			#address-cells = <0x1>;
			interrupts = <0x2 0x0 0x1 0x9>;
			#size-cells = <0x0>;
			phandle = <0x68>;
			phys = <0x19>;
			reg = <0x7e980000 0x10000 0x7e006000 0x1000>;

			usb1@1 {
				compatible = "usb424,9514";
				#address-cells = <0x1>;
				#size-cells = <0x0>;
				reg = <0x1>;

				usbether@1 {
					compatible = "usb424,ec00";
					local-mac-address = [b8 27 eb ab 8b 1c];
					phandle = <0x69>;
					reg = <0x1>;
				};
			};
		};

		smi@7e600000 {
			compatible = "brcm,bcm2835-smi";
			clocks = <0x8 0x2a>;
			status = "disabled";
			interrupts = <0x2 0x10>;
			assigned-clock-rates = <0x7735940>;
			dma-names = "rx-tx";
			assigned-clocks = <0x8 0x2a>;
			phandle = <0x70>;
			reg = <0x7e600000 0x100>;
			dmas = <0xb 0x4>;
		};

		spi@7e2150c0 {
			compatible = "brcm,bcm2835-aux-spi";
			clocks = <0x13 0x2>;
			status = "disabled";
			interrupt-parent = <0x13>;
			#address-cells = <0x1>;
			interrupts = <0x2>;
			#size-cells = <0x0>;
			phandle = <0x62>;
			reg = <0x7e2150c0 0x40>;
		};
	};

	leds {
		compatible = "gpio-leds";
		phandle = <0x77>;

		act {
			gpios = <0x1d 0x0 0x0>;
			label = "led0";
			phandle = <0x2e>;
			linux,default-trigger = "mmc0";
		};

		pwr {
			gpios = <0x17 0x7 0x0>;
			label = "led1";
			phandle = <0x2f>;
			linux,default-trigger = "input";
		};
	};

	aliases {
		display0 = "/chosen/framebuffer@3eb79000";
		intc = "/soc/interrupt-controller@7e00b200";
		spi2 = "/soc/spi@7e2150c0";
		i2c1 = "/soc/i2c@7e804000";
		i2c_vc = "/soc/i2c@7e205000";
		spi0 = "/soc/spi@7e204000";
		thermal = "/soc/thermal@7e212000";
		vchiq = "/soc/vchiq";
		sdhost = "/soc/mmc@7e202000";
		aux = "/soc/aux@0x7e215000";
		gpio = "/soc/gpio@7e200000";
		mmc1 = "/soc/mmc@7e300000";
		audio = "/soc/audio";
		dma = "/soc/dma@7e007000";
		ethernet0 = "/soc/usb@7e980000/usb1@1/usbether@1";
		soc = "/soc";
		leds = "/leds";
		mmc = "/soc/mmc@7e300000";
		serial1 = "/soc/serial@7e201000";
		i2c_arm = "/soc/i2c@7e804000";
		uart0 = "/soc/serial@7e201000";
		fb = "/soc/fb";
		i2c2 = "/soc/i2c@7e805000";
		i2s = "/soc/i2s@7e203000";
		spi1 = "/soc/spi@7e215080";
		usb = "/soc/usb@7e980000";
		i2c0 = "/soc/i2c@7e205000";
		watchdog = "/soc/watchdog@7e100000";
		axiperf = "/soc/axiperf";
		mmc0 = "/soc/mmc@7e202000";
		sound = "/soc/sound";
		mailbox = "/soc/mailbox@7e00b880";
		uart1 = "/soc/serial@7e215040";
		random = "/soc/rng@7e104000";
		i2c = "/soc/i2c@7e804000";
		serial0 = "/soc/serial@7e215040";
	};

	chosen {
		compatible = "simple_bus";
		bootargs = "8250.nr_uarts=1 cma=256M bcm2708_fb.fbwidth=592 bcm2708_fb.fbheight=448 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=6d4e87c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait";
		ranges;
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		kaslr-seed = <0xf4fee6c0 0xd90b156e>;

		framebuffer@3eb79000 {
			compatible = "simple-framebuffer";
			width = <0x250>;
			stride = <0x4a0>;
			status = "okay";
			reg = <0x3eb79000 0x81800>;
			format = "r5g6b5";
			height = <0x1c0>;
		};
	};

	thermal-zones {

		cpu-thermal {
			thermal-sensors = <0x2>;
			polling-delay = <0x3e8>;
			polling-delay-passive = <0x0>;
			coefficients = <0xfffffde6 0x64960>;
			phandle = <0x30>;

			cooling-maps {
			};
		};
	};

	timer {
		compatible = "arm,armv7-timer";
		always-on;
		interrupt-parent = <0x3>;
		interrupts = <0x0 0x1 0x3 0x2>;
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x3b400000>;
	};

	phy {
		compatible = "usb-nop-xceiv";
		phandle = <0x19>;
		#phy-cells = <0x0>;
	};

	fixedregulator_3v3 {
		compatible = "regulator-fixed";
		phandle = <0x76>;
		regulator-min-microvolt = <0x325aa0>;
		regulator-max-microvolt = <0x325aa0>;
		regulator-always-on;
		regulator-name = "3v3";
	};

	cpus {
		enable-method = "brcm,bcm2836-smp";
		#address-cells = <0x1>;
		#size-cells = <0x0>;
		phandle = <0x74>;

		cpu@3 {
			compatible = "arm,cortex-a53";
			cpu-release-addr = <0x0 0xf0>;
			device_type = "cpu";
			enable-method = "spin-table";
			phandle = <0x2d>;
			reg = <0x3>;
			clock-frequency = <0x47868c00>;
		};

		cpu@1 {
			compatible = "arm,cortex-a53";
			cpu-release-addr = <0x0 0xe0>;
			device_type = "cpu";
			enable-method = "spin-table";
			phandle = <0x2b>;
			reg = <0x1>;
			clock-frequency = <0x47868c00>;
		};

		cpu@2 {
			compatible = "arm,cortex-a53";
			cpu-release-addr = <0x0 0xe8>;
			device_type = "cpu";
			enable-method = "spin-table";
			phandle = <0x2c>;
			reg = <0x2>;
			clock-frequency = <0x47868c00>;
		};

		cpu@0 {
			compatible = "arm,cortex-a53";
			cpu-release-addr = <0x0 0xd8>;
			device_type = "cpu";
			enable-method = "spin-table";
			phandle = <0x2a>;
			reg = <0x0>;
			clock-frequency = <0x47868c00>;
		};
	};

	fixedregulator_5v0 {
		compatible = "regulator-fixed";
		phandle = <0x75>;
		regulator-min-microvolt = <0x4c4b40>;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-always-on;
		regulator-name = "5v0";
	};

	axi {

		vc_mem {
			reg = <0x3ec00000 0x40000000 0xc0000000>;
		};
	};
};