From e57950c01441a4d5b7e8282954f55e85711c251a Mon Sep 17 00:00:00 2001
From: inc <87362+inc@users.noreply.github.com>
Date: Wed, 6 Nov 2024 06:41:26 +0100
Subject: [PATCH 1/2] add support for machdyne werkzeug rp2040 board

---
 src/boards/include/boards/machdyne_werkzeug.h | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 src/boards/include/boards/machdyne_werkzeug.h

diff --git a/src/boards/include/boards/machdyne_werkzeug.h b/src/boards/include/boards/machdyne_werkzeug.h
new file mode 100644
index 000000000..472a94029
--- /dev/null
+++ b/src/boards/include/boards/machdyne_werkzeug.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// pico_cmake_set PICO_PLATFORM=rp2040
+
+#ifndef _BOARDS_MACHDYNE_WERKZEUG_H
+#define _BOARDS_MACHDYNE_WERKZEUG_H
+
+// For board detection
+#define MACHDYNE_WERKZEUG
+
+// On some samples, the xosc can take longer to stabilize than is usual
+#ifndef PICO_XOSC_STARTUP_DELAY_MULTIPLIER
+#define PICO_XOSC_STARTUP_DELAY_MULTIPLIER 64
+#endif
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 0
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 0
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 1
+#endif
+
+// --- LED ---
+#ifndef PICO_DEFAULT_LED_PIN
+#define PICO_DEFAULT_LED_PIN 20
+#define PICO_DEFAULT_LED_PIN_INVERTED 1
+#endif
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 0
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 4
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 5
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN 18
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN 19
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN 16
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN 17
+#endif
+
+// --- FLASH ---
+
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (1 * 1024 * 1024)
+#endif
+
+#ifndef PICO_RP2040_B0_SUPPORTED
+#define PICO_RP2040_B0_SUPPORTED 1
+#endif
+
+#endif

From 34faf11f4705693e939997da93473ceea2bc3d9b Mon Sep 17 00:00:00 2001
From: inc <87362+inc@users.noreply.github.com>
Date: Mon, 11 Nov 2024 16:30:55 +0100
Subject: [PATCH 2/2] boards/machdyne_werkzeug: set default flash size for
 cmake

---
 src/boards/include/boards/machdyne_werkzeug.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/src/boards/include/boards/machdyne_werkzeug.h b/src/boards/include/boards/machdyne_werkzeug.h
index 472a94029..8b45829b7 100644
--- a/src/boards/include/boards/machdyne_werkzeug.h
+++ b/src/boards/include/boards/machdyne_werkzeug.h
@@ -75,6 +75,7 @@
 #define PICO_FLASH_SPI_CLKDIV 2
 #endif
 
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (1 * 1024 * 1024)
 #ifndef PICO_FLASH_SIZE_BYTES
 #define PICO_FLASH_SIZE_BYTES (1 * 1024 * 1024)
 #endif