Prowler: AWS CIS Benchmark Tool

Description

Prowler is a command line tool for AWS Security Best Practices Assessment, Auditing, Hardening and Forensics Readiness Tool.

It follows guidelines of the CIS Amazon Web Services Foundations Benchmark (49 checks) and has 40 additional checks including related to GDPR and HIPAA.

Read more about CIS Amazon Web Services Foundations Benchmark v1.2.0 - 05-23-2018

Features

It covers hardening and security best practices for all AWS regions related to the next groups:

Identity and Access Management (22 checks) [group1]
Logging (9 checks) [group2]
Monitoring (14 checks) [group3]
Networking (4 checks) [group4]
CIS Level 1 [cislevel1]
CIS Level 2 [cislevel2]
Extras (39 checks) see Extras section [extras]
Forensics related group of checks [forensics-ready]
GDPR [gdpr] Read more here
HIPAA [hipaa] Read more here

For a comprehensive list and resolution look at the guide on the link above.

With Prowler you can:

get a colorful or monochrome report
a CSV format report for diff
run specific checks without having to run the entire report
check multiple AWS accounts in parallel

Requirements and Installation

This script has been written in bash using AWS-CLI and it works in Linux and OSX.

Make sure your AWS-CLI is installed on your workstation, with Python pip already installed:
```
pip install awscli
```
Or install it using "brew", "apt", "yum" or manually from https://aws.amazon.com/cli/

Previous steps, from your workstation:

git clone https://github.com/toniblyx/prowler
cd prowler

Make sure you have properly configured your AWS-CLI with a valid Access Key and Region:
```
aws configure
```
Make sure your Secret and Access Keys are associated to a user with proper permissions to do all checks. To make sure add SecurityAuditor default policy to your user. Policy ARN is
```
arn:aws:iam::aws:policy/SecurityAudit
```
In some cases you may need more list or get permissions in some services, look at the Troubleshooting section for a more comprehensive policy if you find issues with the default SecurityAudit policy.

Usage

Run the prowler command without options (it will use your environment variable credentials if they exist or will default to using the ~/.aws/credentials file and run checks over all regions when needed. The default region is us-east-1):
```
./prowler
```
Use -l to list all available checks and group of checks (sections)
For custom AWS-CLI profile and region, use the following: (it will use your custom profile and run checks over all regions when needed):
```
./prowler -p custom-profile -r us-east-1
```
For a single check use option -c:
```
./prowler -c check310
```
or multiple checks separated by comma:
```
./prowler -c check310,check722
```
or all checks but some of them:
```
./prowler -E check42,check43
```
or for custom profile and region:
```
./prowler -p custom-profile -r us-east-1 -c check11
```
or for a group of checks use group name:
```
./prowler -g group1 # for iam related checks
```
or exclude some checks in the group:
```
./prowler -g group4 -E check42,check43
```
Valid check numbers are based on the AWS CIS Benchmark guide, so 1.1 is check11 and 3.10 is check310

If you want to save your report for later analysis:

./prowler -M mono > prowler-report.txt

or if you want a coloured HTML report do:

pip install ansi2html
./prowler | ansi2html -la > report.html

or if you want a pipe-delimited report file, do:

./prowler -M csv > output.psv

or json formatted output using jq, do:

./prowler -M json > prowler-output.json

or save your report in a S3 bucket:

./prowler -M mono | aws s3 cp - s3://bucket-name/prowler-report.txt

To perform an assessment based on CIS Profile Definitions you can use cislevel1 or cislevel2 with -c flag, more information about this here, page 8:
```
./prowler -g cislevel1
```

If you want to run Prowler to check multiple AWS accounts in parallel (runs up to 4 simultaneously -P 4):

grep -E '^\[([0-9A-Aa-z_-]+)\]'  ~/.aws/credentials | tr -d '][' | shuf |  \
xargs -n 1 -L 1 -I @ -r -P 4 ./prowler -p @ -M csv  2> /dev/null  >> all-accounts.csv

For help use:

./prowler -h

USAGE:
    prowler [ -p <profile> -r <region>  -h ]

Options:
    -p <profile>        specify your AWS profile to use (i.e.: default)
    -r <region>         specify an AWS region to direct API requests to
                            (i.e.: us-east-1), all regions are checked anyway if the check requires it
    -c <check_id>       specify a check id, to see all available checks use -l option
                            (i.e.: check11 for check 1.1 or extra71 for extra check 71)
    -g <group_id>       specify a group of checks by id, to see all available group of checks use -L
                            (i.e.: check3 for entire section 3, cislevel1 for CIS Level 1 Profile Definitions or forensics-ready)
    -f <filterregion>   specify an AWS region to run checks against
                            (i.e.: us-west-1)
    -m <maxitems>       specify the maximum number of items to return for long-running requests (default: 100)
    -M <mode>           output mode: text (default), mono, json, csv (separator is ,; data is on stdout; progress on stderr)
    -k                  keep the credential report
    -n                  show check numbers to sort easier
                            (i.e.: 1.01 instead of 1.1)
    -l                  list all available checks only (does not perform any check)
    -L                  list all groups (does not perform any check)
    -e                  exclude group extras
    -E                  execute all tests except a list of specified checks separated by comma (i.e. check21,check31)
    -b                  do not print Prowler banner
    -V                  show version number & exit
    -s                  show scoring report
    -h                  this help

How to fix every FAIL

Check your report and fix the issues following all specific guidelines per check in https://d0.awsstatic.com/whitepapers/compliance/AWS_CIS_Foundations_Benchmark.pdf

Screenshots

Sample screenshot of report first lines:
Sample screenshot of single check for check 3.3:

Troubleshooting

STS expired token

If you are using an STS token for AWS-CLI and your session is expired you probably get this error:

A client error (ExpiredToken) occurred when calling the GenerateCredentialReport operation: The security token included in the request is expired

To fix it, please renew your token by authenticating again to the AWS API, see next section below if you use MFA.

Run Prowler with MFA protected credentials

To run Prowler using a profile that requires MFA you just need to get the session token before hand. Just make sure you use this command:

aws --profile <YOUR_AWS_PROFILE> sts get-session-token --duration 129600 --serial-number <ARN_OF_MFA> --token-code <MFA_TOKEN_CODE> --output text

Once you get your token you can export it as environment variable:

export AWS_PROFILE=YOUR_AWS_PROFILE 
export AWS_SESSION_TOKEN=YOUR_NEW_TOKEN
AWS_SECRET_ACCESS_KEY=YOUR_SECRET
export AWS_ACCESS_KEY_ID=YOUR_KEY

or set manually up your ~/.aws/credentials file properly.

There are some helpfull tools to save time in this process like aws-mfa-script or aws-cli-mfa.

Custom IAM Policy

Instead of using default policy SecurityAudit for the account you use for checks you may need to create a custom policy with a few more permissions (get and list, not change!) here you go a good example for a "ProwlerPolicyReadOnly":

{
    "Version": "2012-10-17",
    "Statement": [{
        "Action": [
            "acm:describecertificate",
            "acm:listcertificates",
            "apigateway:get",
            "autoscaling:describe*",
            "cloudformation:describestack*",
            "cloudformation:getstackpolicy",
            "cloudformation:gettemplate",
            "cloudformation:liststack*",
            "cloudfront:get*",
            "cloudfront:list*",
            "cloudtrail:describetrails",
            "cloudtrail:geteventselectors",
            "cloudtrail:gettrailstatus",
            "cloudtrail:listtags",
            "cloudwatch:describe*",
            "codecommit:batchgetrepositories",
            "codecommit:getbranch",
            "codecommit:getobjectidentifier",
            "codecommit:getrepository",
            "codecommit:list*",
            "codedeploy:batch*",
            "codedeploy:get*",
            "codedeploy:list*",
            "config:deliver*",
            "config:describe*",
            "config:get*",
            "datapipeline:describeobjects",
            "datapipeline:describepipelines",
            "datapipeline:evaluateexpression",
            "datapipeline:getpipelinedefinition",
            "datapipeline:listpipelines",
            "datapipeline:queryobjects",
            "datapipeline:validatepipelinedefinition",
            "directconnect:describe*",
            "dynamodb:listtables",
            "ec2:describe*",
            "ecr:describe*",
            "ecs:describe*",
            "ecs:list*",
            "elasticache:describe*",
            "elasticbeanstalk:describe*",
            "elasticloadbalancing:describe*",
            "elasticmapreduce:describejobflows",
            "elasticmapreduce:listclusters",
            "es:describeelasticsearchdomainconfig",
            "es:listdomainnames",
            "firehose:describe*",
            "firehose:list*",
            "glacier:listvaults",
            "guardduty:listdetectors",
            "iam:generatecredentialreport",
            "iam:get*",
            "iam:list*",
            "kms:describe*",
            "kms:get*",
            "kms:list*",
            "lambda:getpolicy",
            "lambda:listfunctions",
            "logs:DescribeLogGroups",
            "logs:DescribeMetricFilters",
            "rds:describe*",
            "rds:downloaddblogfileportion",
            "rds:listtagsforresource",
            "redshift:describe*",
            "route53:getchange",
            "route53:getcheckeripranges",
            "route53:getgeolocation",
            "route53:gethealthcheck",
            "route53:gethealthcheckcount",
            "route53:gethealthchecklastfailurereason",
            "route53:gethostedzone",
            "route53:gethostedzonecount",
            "route53:getreusabledelegationset",
            "route53:listgeolocations",
            "route53:listhealthchecks",
            "route53:listhostedzones",
            "route53:listhostedzonesbyname",
            "route53:listqueryloggingconfigs",
            "route53:listresourcerecordsets",
            "route53:listreusabledelegationsets",
            "route53:listtagsforresource",
            "route53:listtagsforresources",
            "route53domains:getdomaindetail",
            "route53domains:getoperationdetail",
            "route53domains:listdomains",
            "route53domains:listoperations",
            "route53domains:listtagsfordomain",
            "s3:getbucket*",
            "s3:getlifecycleconfiguration",
            "s3:getobjectacl",
            "s3:getobjectversionacl",
            "s3:listallmybuckets",
            "sdb:domainmetadata",
            "sdb:listdomains",
            "ses:getidentitydkimattributes",
            "ses:getidentityverificationattributes",
            "ses:listidentities",
            "ses:listverifiedemailaddresses",
            "ses:sendemail",
            "sns:gettopicattributes",
            "sns:listsubscriptionsbytopic",
            "sns:listtopics",
            "sqs:getqueueattributes",
            "sqs:listqueues",
            "support:describetrustedadvisorchecks",
            "tag:getresources",
            "tag:gettagkeys"
        ],
        "Effect": "Allow",
        "Resource": "*"
    }]
}

Incremental IAM Policy

Alternatively, here is a policy which defines the permissions which are NOT present in the AWS Managed SecurityAudit policy. Attach both this policy and the AWS Managed SecurityAudit policy to the group and you're good to go.

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Action": [
        "support:DescribeTrustedAdvisorChecks"
      ],
      "Effect": "Allow",
      "Resource": "*"
    }
  ]
}

Bootstrap Script

Quick bash script to set up a "prowler" IAM user and "SecurityAudit" group with the required permissions. To run the script below, you need user with administrative permissions; set the AWS_DEFAULT_PROFILE to use that account.

export AWS_DEFAULT_PROFILE=default
export ACCOUNT_ID=$(aws sts get-caller-identity --query 'Account' | tr -d '"')
aws iam create-group --group-name SecurityAudit
aws iam create-policy --policy-name ProwlerAuditAdditions --policy-document file://$(pwd)/iam/prowler-policy-additions.json
aws iam attach-group-policy --group-name SecurityAudit --policy-arn arn:aws:iam::aws:policy/SecurityAudit
aws iam attach-group-policy --group-name SecurityAudit --policy-arn arn:aws:iam::${ACCOUNT_ID}:policy/ProwlerAuditAdditions
aws iam create-user --user-name prowler
aws iam add-user-to-group --user-name prowler --group-name SecurityAudit
aws iam create-access-key --user-name prowler
unset ACCOUNT_ID AWS_DEFAULT_PROFILE

The aws iam create-access-key command will output the secret access key and the key id; keep these somewhere safe, and add them to ~/.aws/credentials with an appropriate profile name to use them with prowler. This is the only time they secret key will be shown. If you lose it, you will need to generate a replacement.

Extras

We are adding additional checks to improve the information gather from each account, these checks are out of the scope of the CIS benchmark for AWS but we consider them very helpful to get to know each AWS account set up and find issues on it.

Note: Some of these checks for publicly facing resources may not actually be fully public due to other layered controls like S3 Bucket Policies, Security Groups or Network ACLs.

At this moment we have 37 extra checks:

7.1 (extra71) Ensure users with AdministratorAccess policy have MFA tokens enabled (Not Scored) (Not part of CIS benchmark)
7.2 (extra72) Ensure there are no EBS Snapshots set as Public (Not Scored) (Not part of CIS benchmark)
7.3 (extra73) Ensure there are no S3 buckets open to the Everyone or Any AWS user (Not Scored) (Not part of CIS benchmark)
7.4 (extra74) Ensure there are no Security Groups without ingress filtering being used (Not Scored) (Not part of CIS benchmark)
7.5 (extra75) Ensure there are no Security Groups not being used (Not Scored) (Not part of CIS benchmark)
7.6 (extra76) Ensure there are no EC2 AMIs set as Public (Not Scored) (Not part of CIS benchmark)
7.7 (extra77) Ensure there are no ECR repositories set as Public (Not Scored) (Not part of CIS benchmark)
7.8 (extra78) Ensure there are no Public Accessible RDS instances (Not Scored) (Not part of CIS benchmark)
7.9 (extra79) Check for internet facing Elastic Load Balancers (Not Scored) (Not part of CIS benchmark)
7.10 (extra710) Check for internet facing EC2 Instances (Not Scored) (Not part of CIS benchmark)
7.11 (extra711) Check for Publicly Accessible Redshift Clusters (Not Scored) (Not part of CIS benchmark)
7.12 (extra712) Check if Amazon Macie is enabled (Not Scored) (Not part of CIS benchmark)
7.13 (extra713) Check if GuardDuty is enabled (Not Scored) (Not part of CIS benchmark)
7.14 (extra714) Check if CloudFront distributions have logging enabled (Not Scored) (Not part of CIS benchmark)
7.15 (extra715) Check if Elasticsearch Service domains have logging enabled (Not Scored) (Not part of CIS benchmark)
7.16 (extra716) Check if Elasticsearch Service domains allow open access (Not Scored) (Not part of CIS benchmark)
7.17 (extra717) Check if Elastic Load Balancers have logging enabled (Not Scored) (Not part of CIS benchmark)
7.18 (extra718) Check if S3 buckets have server access logging enabled (Not Scored) (Not part of CIS benchmark)
7.19 (extra719) Check if Route53 hosted zones are logging queries to CloudWatch Logs (Not Scored) (Not part of CIS benchmark)
7.20 (extra720) Check if Lambda functions are being recorded by CloudTrail (Not Scored) (Not part of CIS benchmark)
7.21 (extra721) Check if Redshift cluster has audit logging enabled (Not Scored) (Not part of CIS benchmark)
7.22 (extra722) Check if API Gateway has logging enabled (Not Scored) (Not part of CIS benchmark)
7.23 (extra723) Check if RDS Snapshots are public (Not Scored) (Not part of CIS benchmark)
7.24 (extra724) Check if ACM certificates have Certificate Transparency logging enabled (Not Scored) (Not part of CIS benchmark)
7.25 (extra725) Check if S3 buckets have Object-level logging enabled in CloudTrail (Not Scored) (Not part of CIS benchmark)
7.26 (extra726) Check Trusted Advisor for errors and warnings (Not Scored) (Not part of CIS benchmark)
7.27 (extra727) Check if SQS queues have policy set as Public (Not Scored) (Not part of CIS benchmark)
7.28 (extra728) Check if SQS queues have Server Side Encryption enabled (Not Scored) (Not part of CIS benchmark)
7.29 (extra729) Ensure there are no EBS Volumes unencrypted (Not Scored) (Not part of CIS benchmark)
7.30 (extra730) Check if ACM Certificates are about to expire in 7 days or less (Not Scored) (Not part of CIS benchmark)
7.31 (extra731) Check if SNS topics have policy set as Public (Not Scored) (Not part of CIS benchmark)
7.32 (extra732) Check if Geo restrictions are enabled in CloudFront distributions (Not Scored) (Not part of CIS benchmark)
7.33 (extra733) Check if there are SAML Providers then STS can be used (Not Scored) (Not part of CIS benchmark)
7.34 (extra734) Check if S3 buckets have default encryption (SSE) enabled and policy to enforce it (Not Scored) (Not part of CIS benchmark)
7.35 (extra735) Check if RDS instances storage is encrypted (Not Scored) (Not part of CIS benchmark)
7.36 (extra736) Check exposed KMS keys (Not Scored) (Not part of CIS benchmark)
7.37 (extra737) Check KMS keys with key rotation disabled (Not Scored) (Not part of CIS benchmark)
7.38 (extra738) Check if CloudFront distributions are set to HTTPS (Not Scored) (Not part of CIS benchmark)
7.38 (extra739) Check if ELBs have logging enabled (Not Scored) (Not part of CIS benchmark)
7.40 (extra740) Check if EBS snapshots are encrypted (Not Scored) (Not part of CIS benchmark)

To check all extras in one command:

./prowler -g extras

or to run just one of the checks:

./prowler -c extraNUMBER

Forensics Ready Checks

With this group of checks, Prowler looks if each service with logging or audit capabilities has them enabled to ensure all needed evidences are recorded and collected for an eventual digital forensic investigation in case of incident. List of checks part of this group (you can also see all groups with ./prowler -l):

2.1 Ensure CloudTrail is enabled in all regions (Scored)
2.2 Ensure CloudTrail log file validation is enabled (Scored)
2.3 Ensure the S3 bucket CloudTrail logs to is not publicly accessible (Scored)
2.4 Ensure CloudTrail trails are integrated with CloudWatch Logs (Scored)
2.5 Ensure AWS Config is enabled in all regions (Scored)
2.6 Ensure S3 bucket access logging is enabled on the CloudTrail S3 bucket (Scored)
2.7 Ensure CloudTrail logs are encrypted at rest using KMS CMKs (Scored)
4.3 Ensure VPC Flow Logging is Enabled in all VPCs (Scored)
7.12 Check if Amazon Macie is enabled (Not Scored) (Not part of CIS benchmark)
7.13 Check if GuardDuty is enabled (Not Scored) (Not part of CIS benchmark)
7.14 Check if CloudFront distributions have logging enabled (Not Scored) (Not part of CIS benchmark)
7.15 Check if Elasticsearch Service domains have logging enabled (Not Scored) (Not part of CIS benchmark)
7.17 Check if Elastic Load Balancers have logging enabled (Not Scored) (Not part of CIS benchmark)
7.18 Check if S3 buckets have server access logging enabled (Not Scored) (Not part of CIS benchmark)
7.19 Check if Route53 hosted zones are logging queries to CloudWatch Logs (Not Scored) (Not part of CIS benchmark)
7.20 Check if Lambda functions are being recorded by CloudTrail (Not Scored) (Not part of CIS benchmark)
7.21 Check if Redshift cluster has audit logging enabled (Not Scored) (Not part of CIS benchmark)
7.22 Check if API Gateway has logging enabled (Not Scored) (Not part of CIS benchmark)
7.23 Check if RDS Snapshots are public (Not Scored) (Not part of CIS benchmark)
7.24 Check if ACM certificates have Certificate Transparency logging enabled (Not Scored) (Not part of CIS benchmark)
7.25 Check if S3 buckets have Object-level logging enabled in CloudTrail (Not Scored) (Not part of CIS benchmark)
7.38 Check if ELBs have logging enabled (Not Scored) (Not part of CIS benchmark)

The forensics-ready group of checks uses existing and extra checks. To get a forensics readiness report, run this command:

./prowler -g forensics-ready

GDPR Checks

With this group of checks, Prowler shows result of checks related to GDPR, more information here. The list of checks showed by this group is as follows:

7.18 [extra718] Check if S3 buckets have server access logging enabled (Not Scored) (Not part of CIS benchmark)
7.25 [extra725] Check if S3 buckets have Object-level logging enabled in CloudTrail (Not Scored) (Not part of CIS benchmark)
7.27 [extra727] Check if SQS queues have policy set as Public (Not Scored) (Not part of CIS benchmark)
1.2 [check12] Ensure multi-factor authentication (MFA) is enabled for all IAM users that have a console password (Scored)
1.13 [check113] Ensure MFA is enabled for the root account (Scored)
1.14 [check114] Ensure hardware MFA is enabled for the root account (Scored)
7.1 [extra71] Ensure users with AdministratorAccess policy have MFA tokens enabled (Not Scored) (Not part of CIS benchmark)
7.31 [extra731] Check if SNS topics have policy set as Public (Not Scored) (Not part of CIS benchmark)
7.32 [extra732] Check if Geo restrictions are enabled in CloudFront distributions (Not Scored) (Not part of CIS benchmark)
7.33 [extra733] Check if there are SAML Providers then STS can be used (Not Scored) (Not part of CIS benchmark)
2.5 [check25] Ensure AWS Config is enabled in all regions (Scored)
3.9 [check39] Ensure a log metric filter and alarm exist for AWS Config configuration changes (Scored)
2.1 [check21] Ensure CloudTrail is enabled in all regions (Scored)
2.2 [check22] Ensure CloudTrail log file validation is enabled (Scored)
2.3 [check23] Ensure the S3 bucket CloudTrail logs to is not publicly accessible (Scored)
2.4 [check24] Ensure CloudTrail trails are integrated with CloudWatch Logs (Scored)
2.6 [check26] Ensure S3 bucket access logging is enabled on the CloudTrail S3 bucket (Scored)
2.7 [check27] Ensure CloudTrail logs are encrypted at rest using KMS CMKs (Scored)
3.5 [check35] Ensure a log metric filter and alarm exist for CloudTrail configuration changes (Scored)
7.26 [extra726] Check Trusted Advisor for errors and warnings (Not Scored) (Not part of CIS benchmark)
7.14 [extra714] Check if CloudFront distributions have logging enabled (Not Scored) (Not part of CIS benchmark)
7.15 [extra715] Check if Elasticsearch Service domains have logging enabled (Not Scored) (Not part of CIS benchmark)
7.17 [extra717] Check if Elastic Load Balancers have logging enabled (Not Scored) (Not part of CIS benchmark)
7.19 [extra719] Check if Route53 hosted zones are logging queries to CloudWatch Logs (Not Scored) (Not part of CIS benchmark)
7.20 [extra720] Check if Lambda functions invoke API operations are being recorded by CloudTrail (Not Scored) (Not part of CIS benchmark)
7.21 [extra721] Check if Redshift cluster has audit logging enabled (Not Scored) (Not part of CIS benchmark)
7.22 [extra722] Check if API Gateway has logging enabled (Not Scored) (Not part of CIS benchmark)
4.3 [check43] Ensure the default security group of every VPC restricts all traffic (Scored)
2.5 [check25] Ensure AWS Config is enabled in all regions (Scored)
7.14 [extra714] Check if CloudFront distributions have logging enabled (Not Scored) (Not part of CIS benchmark)
7.29 [extra729] Ensure there are no EBS Volumes unencrypted (Not Scored) (Not part of CIS benchmark)
7.34 [extra734] Check if S3 buckets have default encryption (SSE) enabled and policy to enforce it (Not Scored) (Not part of CIS benchmark)
7.35 [extra735] Check if RDS instances storage is encrypted (Not Scored) (Not part of CIS benchmark)
7.36 [extra736] Check exposed KMS keys (Not Scored) (Not part of CIS benchmark)
7.38 [extra738] Check if CloudFront distributions are set to HTTPS (Not Scored) (Not part of CIS benchmark)
7.40 [extra740] Check if EBS snapshots are encrypted (Not Scored) (Not part of CIS benchmark)

The gdpr group of checks uses existing and extra checks. To get a GDPR report, run this command:

./prowler -g gdpr

HIPAA Checks

With this group of checks, Prowler shows result of checks related to HIPAA, more information here. The list of checks showed by this group is as follows:

1.13 [check113] Ensure MFA is enabled for the root account (Scored)
2.3 [check23] Ensure the S3 bucket CloudTrail logs to is not publicly accessible (Scored)
2.6 [check26] Ensure S3 bucket access logging is enabled on the CloudTrail S3 bucket (Scored)
2.7 [check27] Ensure CloudTrail logs are encrypted at rest using KMS CMKs (Scored)
2.9 [check29] Ensure VPC Flow Logging is Enabled in all VPCs (Scored)
7.18 [extra718] Check if S3 buckets have server access logging enabled (Not Scored) (Not part of CIS benchmark)
7.25 [extra725] Check if S3 buckets have Object-level logging enabled in CloudTrail (Not Scored) (Not part of CIS benchmark)
7.2 [extra72] Ensure there are no EBS Snapshots set as Public (Not Scored) (Not part of CIS benchmark)
7.5 [extra75] Ensure there are no Security Groups not being used (Not Scored) (Not part of CIS benchmark)
7.39 [extra739] Check if ELBs have logging enabled (Not Scored) (Not part of CIS benchmark)
7.29 [extra729] Ensure there are no EBS Volumes unencrypted (Not Scored) (Not part of CIS benchmark)
7.34 [extra734] Check if S3 buckets have default encryption (SSE) enabled and policy to enforce it (Not Scored) (Not part of CIS benchmark)
3.8 [check38] Ensure a log metric filter and alarm exist for S3 bucket policy changes (Scored)
7.3 [extra73] Ensure there are no S3 buckets open to the Everyone or Any AWS user (Not Scored) (Not part of CIS benchmark)
7.40 [extra740] Check if EBS snapshots are encrypted (Not Scored) (Not part of CIS benchmark)
7.35 [extra735] Check if RDS instances storage is encrypted (Not Scored) (Not part of CIS benchmark)

The hipaa group of checks uses existing and extra checks. To get a HIPAA report, run this command:

./prowler -g hipaa

Add Custom Checks

In order to add any new check feel free to create a new extra check in the extras group or other group. To do so, you will need to follow these steps:

Follow structure in file checks/check_sample
Name your check with a number part of an existing group or a new one
Save changes and run it as ./prowler -c extraNN
Send me a pull request! :)

Add Custom Groups

Follow structure in file groups/groupN_sample
Name your group with a non existing number
Save changes and run it as ./prowler -g extraNN
Send me a pull request! :)

You can also create a group with only the checks that you want to perform in your company, for instance a group named group9_mycompany with only the list of checks that you care or your particular compliance applies.

Third Party Integrations

Telegram

Javier Pecete has done an awesome job integrating Prowler with Telegram, you have more details here https://github.com/i4specete/ServerTelegramBot

Cloud Security Suite

The guys of SecurityFTW have added Prowler in their Cloud Security Suite along with other cool security tools https://github.com/SecurityFTW/cs-suite

License

All CIS based checks in the checks folder are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International Public License. The link to the license terms can be found at https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode Any other piece of code is licensed as Apache License 2.0 as specified in each file. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

NOTE: If you are interested in using Prowler for commercial purposes remember that due to the CC4.0 license “The distributors or partners that are interested and using Prowler would need to enroll as CIS SecureSuite Members to incorporate this product, which includes references to CIS resources, in their offering.". Information about CIS pricing for vendors here: https://www.cisecurity.org/cis-securesuite/pricing-and-categories/product-vendor/

I'm not related anyhow with CIS organization, I just write and maintain Prowler to help companies over the world to make their cloud infrastructure more secure.

If you want to contact me visit https://blyx.com/contact

Name		Name	Last commit message	Last commit date
Latest commit History 723 Commits
checks		checks
groups		groups
iam		iam
include		include
integrations/wazuh		integrations/wazuh
util		util
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
LICENSE		LICENSE
LICENSE-APACHE-2.0		LICENSE-APACHE-2.0
LICENSE-CC-BY-SA-4.0		LICENSE-CC-BY-SA-4.0
LIST_OF_CHECKS_AND_GROUPS.md		LIST_OF_CHECKS_AND_GROUPS.md
Pipfile		Pipfile
README.md		README.md
prowler		prowler

License

Licenses found

rckasa/prowler

Folders and files

Latest commit

History

Repository files navigation

Prowler: AWS CIS Benchmark Tool

Table of Contents

Description

Features

Requirements and Installation

Usage

How to fix every FAIL

Screenshots

Troubleshooting

STS expired token

Run Prowler with MFA protected credentials

Custom IAM Policy

Incremental IAM Policy

Bootstrap Script

Extras

Forensics Ready Checks

GDPR Checks

HIPAA Checks

Add Custom Checks

Add Custom Groups

Third Party Integrations

Telegram

Cloud Security Suite

License

About

Resources

License

Licenses found

Code of conduct

Stars

Watchers

Forks

Languages