RESCUE dwrdev01:/ # cat /var/log/rear/rear-dwrdev01res.log
2019-04-03 10:11:16.121014995 Relax-and-Recover 2.4 / 2018-06-21
2019-04-03 10:11:16.122111050 Command line options: /bin/rear recover
2019-04-03 10:11:16.123121671 Using log file: /var/log/rear/rear-dwrdev01res.log
2019-04-03 10:11:16.124592152 Including /etc/rear/os.conf
2019-04-03 10:11:16.127593632 Including conf/Linux-ppc64le.conf
2019-04-03 10:11:16.130780641 Including conf/GNU/Linux.conf
2019-04-03 10:11:16.135554828 Including conf/SUSE_LINUX.conf
2019-04-03 10:11:16.136934442 Including /etc/rear/site.conf
2019-04-03 10:11:16.138553291 Including /etc/rear/local.conf
2019-04-03 10:11:16.139731641 Including /etc/rear/rescue.conf
2019-04-03 10:11:16.142570578 ======================
2019-04-03 10:11:16.143447037 Running 'init' stage
2019-04-03 10:11:16.144347097 ======================
2019-04-03 10:11:16.150451475 Including init/default/005_verify_os_conf.sh
2019-04-03 10:11:16.153543149 Including init/default/010_set_drlm_env.sh
2019-04-03 10:11:16.156650907 Including init/default/030_update_recovery_system.sh
2019-04-03 10:11:16.159733081 Including init/default/050_check_rear_recover_mode.sh
2019-04-03 10:11:16.161039529 Running workflow recover within the ReaR rescue/recovery system
2019-04-03 10:11:16.162340853 Finished running 'init' stage in 0 seconds
2019-04-03 10:11:16.169890580 Using build area '/tmp/rear.ZNx547vzv3GNktg'
mkdir: created directory '/tmp/rear.ZNx547vzv3GNktg/rootfs'
mkdir: created directory '/tmp/rear.ZNx547vzv3GNktg/tmp'
2019-04-03 10:11:16.172904423 Running recover workflow
2019-04-03 10:11:16.174034714 ======================
2019-04-03 10:11:16.174911652 Running 'setup' stage
2019-04-03 10:11:16.175754134 ======================
2019-04-03 10:11:16.181799733 Including setup/default/005_ssh_agent_start.sh
2019-04-03 10:11:16.186272374 Starting up ssh-agent
Agent pid 13669
2019-04-03 10:11:16.191996015 Including setup/default/010_pre_recovery_script.sh
2019-04-03 10:11:16.193007021 Finished running 'setup' stage in 0 seconds
2019-04-03 10:11:16.193950748 ======================
2019-04-03 10:11:16.194826425 Running 'verify' stage
2019-04-03 10:11:16.195670499 ======================
2019-04-03 10:11:16.201798791 Including verify/default/020_cciss_scsi_engage.sh
2019-04-03 10:11:16.205623748 Including verify/default/020_translate_url.sh
2019-04-03 10:11:16.209022496 Including verify/default/030_translate_tape.sh
2019-04-03 10:11:16.212269805 Including verify/default/040_validate_variables.sh
2019-04-03 10:11:16.215407075 Including verify/default/050_create_mappings_dir.sh
2019-04-03 10:11:16.218467211 Including verify/GNU/Linux/050_sane_recovery_check.sh
2019-04-03 10:11:16.221636511 Including verify/GNU/Linux/230_storage_and_network_modules.sh
2019-04-03 10:11:16.222806648 Including storage drivers
2019-04-03 10:11:16.227656191 Including network drivers
2019-04-03 10:11:16.233082952 Including crypto drivers
2019-04-03 10:11:16.236697600 Including virtualization drivers
2019-04-03 10:11:16.240229961 Including additional drivers
2019-04-03 10:11:16.245385856 Including verify/GNU/Linux/260_recovery_storage_drivers.sh
2019-04-03 10:11:16.286483379 Will do driver migration (recreating initramfs/initrd)
2019-04-03 10:11:16.289942240 Including verify/NSR/default/400_verify_nsr.sh
2019-04-03 10:11:16.291135026 NSRSERVER (c301bcksrv1.infra.bck.itdn.org) was defined in /etc/rear/local.conf
2019-04-03 10:11:16.292561292 Skipping ping test
2019-04-03 10:11:16.293748501 EMC NetWorker server NSRSERVER=c301bcksrv1.infra.bck.itdn.org
2019-04-03 10:11:16.297170729 Including verify/NSR/default/410_verify_nsr_paths.sh
2019-04-03 10:11:16.299537204 We will recover the following file systems from EMC NetWorker: /
/tmp
/var
/hana/data
/hana/log
/usr/sap
/sapmnt
/hana/shared
/install
/usr/sap/trans
2019-04-03 10:11:16.300976716 Finished running 'verify' stage in 0 seconds
2019-04-03 10:11:16.301986945 ======================
2019-04-03 10:11:16.302891172 Running 'layout/prepare' stage
2019-04-03 10:11:16.303868892 ======================
2019-04-03 10:11:16.310359776 Including layout/prepare/default/010_prepare_files.sh
2019-04-03 10:11:16.315965555 Including layout/prepare/GNU/Linux/100_include_partition_code.sh
2019-04-03 10:11:16.326066710 Including layout/prepare/GNU/Linux/110_include_lvm_code.sh
2019-04-03 10:11:16.335410094 Including layout/prepare/GNU/Linux/120_include_raid_code.sh
/usr/share/rear/lib/_input-output-functions.sh: line 328: type: mdadm: not found
2019-04-03 10:11:16.338480902 Including layout/prepare/GNU/Linux/130_include_filesystem_code.sh
2019-04-03 10:11:16.343738647 Including layout/prepare/GNU/Linux/130_include_mount_filesystem_code.sh
2019-04-03 10:11:16.347437282 Including layout/prepare/GNU/Linux/130_include_mount_subvolumes_code.sh
2019-04-03 10:11:16.354262328 Including layout/prepare/GNU/Linux/140_include_swap_code.sh
2019-04-03 10:11:16.361661368 Including layout/prepare/GNU/Linux/150_include_drbd_code.sh
2019-04-03 10:11:16.364947282 Including layout/prepare/GNU/Linux/160_include_luks_code.sh
2019-04-03 10:11:16.368415237 Including layout/prepare/GNU/Linux/170_include_hpraid_code.sh
/usr/share/rear/lib/_input-output-functions.sh: line 328: type: hpacucli: not found
/usr/share/rear/lib/_input-output-functions.sh: line 328: type: hpssacli: not found
/usr/share/rear/lib/_input-output-functions.sh: line 328: type: ssacli: not found
2019-04-03 10:11:16.372130891 Including layout/prepare/GNU/Linux/180_include_opaldisk_code.sh
2019-04-03 10:11:16.375734637 Including layout/prepare/default/200_recreate_hpraid.sh
2019-04-03 10:11:16.379820442 Including layout/prepare/GNU/Linux/210_load_multipath.sh
2019-04-03 10:11:16.382369080 Setting up multipathing
2019-04-03 10:11:16.383743666 Activating multipath
2019-04-03 10:11:16.386286295 multipath activated
2019-04-03 10:11:16.473826632 Starting multipath daemon
2019-04-03 10:11:16.478296185 multipathd started
2019-04-03 10:11:16.479673966 Listing multipath device found
2019-04-03 10:11:16.534828083 mpathp (3600507680c8182613800000000000417) dm-9 IBM,2145 size=100G
mpatho (3600507680c8182613800000000000dc4) dm-8 IBM,2145 size=30G
mpathn (3600507680c8182613800000000000dc3) dm-7 IBM,2145 size=2.0G
mpathm (3600507680c8182613800000000000dc6) dm-6 IBM,2145 size=227G
mpathl (3600507680c8182613800000000000dc5) dm-5 IBM,2145 size=196G
mpathk (3600507680c8182613800000000000dc8) dm-4 IBM,2145 size=171G
mpathj (3600507680c8182613800000000000dc7) dm-3 IBM,2145 size=171G
mpathi (3600507680c8182613800000000000415) dm-0 IBM,2145 size=20G
2019-04-03 10:11:16.538556208 Including layout/prepare/default/250_compare_disks.sh
2019-04-03 10:11:16.540148514 Comparing disks
2019-04-03 10:11:16.544701102 Ambiguous disk layout needs manual configuration (more than one disk with same size used in '/var/lib/rear/layout/disklayout.conf')
2019-04-03 10:11:16.546895477 Switching to manual disk layout configuration
2019-04-03 10:11:16.550629151 Including layout/prepare/default/270_overrule_migration_mode.sh
2019-04-03 10:11:16.555456013 Including layout/prepare/default/300_map_disks.sh
2019-04-03 10:11:16.815787548 Using /dev/mapper/mpathp (same size) for recreating /dev/mapper/DWR_dwrdev01_ivg
2019-04-03 10:11:16.873977836 Using /dev/mapper/mpathl (same size) for recreating /dev/mapper/DWR_dwrdev01_lvg
2019-04-03 10:11:16.938350067 Using /dev/mapper/mpathm (same size) for recreating /dev/mapper/DWR_dwrdev01_shvg
2019-04-03 10:11:16.950557521 Using /dev/mapper/mpathi (same size) for recreating /dev/mapper/DWR_dwrdev01_rvg
2019-04-03 10:11:17.021865566 Using /dev/mapper/mpathn (same size) for recreating /dev/mapper/DWR_dwrdev01_svg
2019-04-03 10:11:17.099269715 Using /dev/mapper/mpatho (same size) for recreating /dev/mapper/DWR_dwrdev01_tvg
2019-04-03 10:11:17.144661040 Using /dev/mapper/mpathj (same size) for recreating /dev/mapper/DWR_dwrdev01_dvg_m2
2019-04-03 10:11:17.196216753 Using /dev/mapper/mpathk (same size) for recreating /dev/mapper/DWR_dwrdev01_dvg_m1
2019-04-03 10:11:17.209078807 Current disk mapping table (source -> target):
2019-04-03 10:11:17.211864977     /dev/mapper/DWR_dwrdev01_ivg /dev/mapper/mpathp
    /dev/mapper/DWR_dwrdev01_lvg /dev/mapper/mpathl
    /dev/mapper/DWR_dwrdev01_shvg /dev/mapper/mpathm
    /dev/mapper/DWR_dwrdev01_rvg /dev/mapper/mpathi
    /dev/mapper/DWR_dwrdev01_svg /dev/mapper/mpathn
    /dev/mapper/DWR_dwrdev01_tvg /dev/mapper/mpatho
    /dev/mapper/DWR_dwrdev01_dvg_m2 /dev/mapper/mpathj
    /dev/mapper/DWR_dwrdev01_dvg_m1 /dev/mapper/mpathk
2019-04-03 10:11:17.214624295 UserInput: called in /usr/share/rear/layout/prepare/default/300_map_disks.sh line 211
2019-04-03 10:11:17.217683303 UserInput: Default input in choices - using choice number 1 as default input
2019-04-03 10:11:17.219181256 Confirm or edit the disk mapping
2019-04-03 10:11:17.220701093 1) Confirm disk mapping and continue 'rear recover'
2019-04-03 10:11:17.222041298 2) Edit disk mapping (/var/lib/rear/layout/disk_mappings)
2019-04-03 10:11:17.223404914 3) Use Relax-and-Recover shell and return back to here
2019-04-03 10:11:17.224703777 4) Abort 'rear recover'
2019-04-03 10:11:17.226004378 (default '1' timeout 300 seconds)
2019-04-03 10:11:18.646936526 UserInput: 'read' got as user input '1'
2019-04-03 10:11:18.650495143 User confirmed disk mapping
2019-04-03 10:11:18.664157146 Including layout/prepare/default/310_remove_exclusions.sh
2019-04-03 10:11:18.670123305 Including layout/prepare/default/320_apply_mappings.sh
2019-04-03 10:11:18.846637796 Including layout/prepare/default/420_autoresize_last_partitions.sh
2019-04-03 10:11:18.856881557 Including layout/prepare/default/430_autoresize_all_partitions.sh
2019-04-03 10:11:18.860173769 Including layout/prepare/default/500_confirm_layout_file.sh
2019-04-03 10:11:18.863679941 UserInput: called in /usr/share/rear/layout/prepare/default/500_confirm_layout_file.sh line 26
2019-04-03 10:11:18.866854993 UserInput: Default input in choices - using choice number 1 as default input
2019-04-03 10:11:18.868345511 Confirm or edit the disk layout file
2019-04-03 10:11:18.869871044 1) Confirm disk layout and continue 'rear recover'
2019-04-03 10:11:18.871400641 2) Edit disk layout (/var/lib/rear/layout/disklayout.conf)
2019-04-03 10:11:18.872834807 3) View disk layout (/var/lib/rear/layout/disklayout.conf)
2019-04-03 10:11:18.874218096 4) View original disk space usage (/var/lib/rear/layout/config/df.txt)
2019-04-03 10:11:18.875682697 5) Use Relax-and-Recover shell and return back to here
2019-04-03 10:11:18.877155021 6) Abort 'rear recover'
2019-04-03 10:11:18.878572463 (default '1' timeout 300 seconds)
2019-04-03 10:11:19.960731195 UserInput: 'read' got as user input '1'
2019-04-03 10:11:19.964276115 User confirmed disk layout file
2019-04-03 10:11:19.967921582 Including layout/prepare/default/510_list_dependencies.sh
2019-04-03 10:11:20.141741671 Including layout/prepare/default/520_exclude_components.sh
2019-04-03 10:11:20.215712147 Including layout/prepare/default/540_generate_device_code.sh
multipath /dev/mapper/mpathp 107374182400 /dev/sdaf,/dev/sdan,/dev/sdav,/dev/sdbd,/dev/sdbl,/dev/sdh,/dev/sdp,/dev/sdx
2019-04-03 10:11:20.341136895 Found current or former multipath device /dev/mapper/mpathp in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:20.344030762 No partitions on device /dev/mapper/mpathp.
multipath /dev/mapper/mpathl 210453397504 /dev/sdac,/dev/sdak,/dev/sdas,/dev/sdba,/dev/sdbi,/dev/sde,/dev/sdm,/dev/sdu
2019-04-03 10:11:20.582304812 Found current or former multipath device /dev/mapper/mpathl in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:20.585039227 No partitions on device /dev/mapper/mpathl.
multipath /dev/mapper/mpathm 243739394048 /dev/sdad,/dev/sdal,/dev/sdat,/dev/sdbb,/dev/sdbj,/dev/sdf,/dev/sdn,/dev/sdv
2019-04-03 10:11:20.795946805 Found current or former multipath device /dev/mapper/mpathm in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:20.798561823 No partitions on device /dev/mapper/mpathm.
multipath /dev/mapper/mpathi 21474836480 /dev/sda,/dev/sdag,/dev/sdao,/dev/sdaw,/dev/sdbe,/dev/sdi,/dev/sdq,/dev/sdy
2019-04-03 10:11:21.044005821 Found current or former multipath device /dev/mapper/mpathi in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:21.046717514 Disk label for /dev/mapper/mpathi detected as msdos.
2019-04-03 10:11:21.458939063 Begin create_fs( fs:/ )
2019-04-03 10:11:21.584171382 Begin mount_fs( fs:/ )
2019-04-03 10:11:21.587308856 End mount_fs( fs:/ )
2019-04-03 10:11:21.588548628 End create_fs( fs:/ )
2019-04-03 10:11:21.621305920 Begin create_fs( fs:/hana/log )
2019-04-03 10:11:21.748813478 Begin mount_fs( fs:/hana/log )
2019-04-03 10:11:21.752104270 End mount_fs( fs:/hana/log )
2019-04-03 10:11:21.753307843 End create_fs( fs:/hana/log )
2019-04-03 10:11:21.787156962 Begin create_fs( fs:/sapmnt )
2019-04-03 10:11:21.914607762 Begin mount_fs( fs:/sapmnt )
2019-04-03 10:11:21.917858266 End mount_fs( fs:/sapmnt )
2019-04-03 10:11:21.919167541 End create_fs( fs:/sapmnt )
2019-04-03 10:11:21.951872493 Begin create_fs( fs:/hana/shared )
2019-04-03 10:11:22.081891278 Begin mount_fs( fs:/hana/shared )
2019-04-03 10:11:22.085140790 End mount_fs( fs:/hana/shared )
2019-04-03 10:11:22.086501967 End create_fs( fs:/hana/shared )
2019-04-03 10:11:22.120263222 Begin create_fs( fs:/usr/sap )
2019-04-03 10:11:22.249234452 Begin mount_fs( fs:/usr/sap )
2019-04-03 10:11:22.252593111 End mount_fs( fs:/usr/sap )
2019-04-03 10:11:22.253958469 End create_fs( fs:/usr/sap )
2019-04-03 10:11:22.287843900 Begin create_fs( fs:/install )
2019-04-03 10:11:22.416912558 Begin mount_fs( fs:/install )
2019-04-03 10:11:22.420174600 End mount_fs( fs:/install )
2019-04-03 10:11:22.421398053 End create_fs( fs:/install )
2019-04-03 10:11:22.453946481 Begin create_fs( fs:/tmp )
2019-04-03 10:11:22.582923496 Begin mount_fs( fs:/tmp )
2019-04-03 10:11:22.586079963 End mount_fs( fs:/tmp )
2019-04-03 10:11:22.587318496 End create_fs( fs:/tmp )
2019-04-03 10:11:22.621343320 Begin create_fs( fs:/var )
2019-04-03 10:11:22.754204341 Begin mount_fs( fs:/var )
2019-04-03 10:11:22.757670362 End mount_fs( fs:/var )
2019-04-03 10:11:22.758906823 End create_fs( fs:/var )
multipath /dev/mapper/mpathn 2147483648 /dev/sdah,/dev/sdap,/dev/sdax,/dev/sdb,/dev/sdbf,/dev/sdj,/dev/sdr,/dev/sdz
2019-04-03 10:11:22.846551675 Found current or former multipath device /dev/mapper/mpathn in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:22.849521952 No partitions on device /dev/mapper/mpathn.
multipath /dev/mapper/mpatho 32212254720 /dev/sdae,/dev/sdam,/dev/sdau,/dev/sdbc,/dev/sdbk,/dev/sdg,/dev/sdo,/dev/sdw
2019-04-03 10:11:22.930883193 Found current or former multipath device /dev/mapper/mpatho in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:22.933707607 No partitions on device /dev/mapper/mpatho.
2019-04-03 10:11:23.025023565 Begin create_fs( fs:/usr/sap/trans )
2019-04-03 10:11:23.157247725 Begin mount_fs( fs:/usr/sap/trans )
2019-04-03 10:11:23.160730224 End mount_fs( fs:/usr/sap/trans )
2019-04-03 10:11:23.162095267 End create_fs( fs:/usr/sap/trans )
multipath /dev/mapper/mpathj 183609851904 /dev/sdab,/dev/sdaj,/dev/sdar,/dev/sdaz,/dev/sdbh,/dev/sdd,/dev/sdl,/dev/sdt
2019-04-03 10:11:23.194191621 Found current or former multipath device /dev/mapper/mpathj in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:23.197077156 No partitions on device /dev/mapper/mpathj.
multipath /dev/mapper/mpathk 183609851904 /dev/sdaa,/dev/sdai,/dev/sdaq,/dev/sday,/dev/sdbg,/dev/sdc,/dev/sdk,/dev/sds
2019-04-03 10:11:23.238982365 Found current or former multipath device /dev/mapper/mpathk in /var/lib/rear/layout/disklayout.conf: Creating partitions on it
2019-04-03 10:11:23.241863704 No partitions on device /dev/mapper/mpathk.
2019-04-03 10:11:23.298148032 Begin create_fs( fs:/hana/data )
2019-04-03 10:11:23.431376932 Begin mount_fs( fs:/hana/data )
2019-04-03 10:11:23.434587317 End mount_fs( fs:/hana/data )
2019-04-03 10:11:23.435811899 End create_fs( fs:/hana/data )
2019-04-03 10:11:23.444457152 Including layout/prepare/default/550_finalize_script.sh
2019-04-03 10:11:23.448494351 Including layout/prepare/default/600_show_unprocessed.sh
2019-04-03 10:11:23.454312206 Including layout/prepare/default/610_exclude_from_restore.sh
2019-04-03 10:11:23.455710416 Finished running 'layout/prepare' stage in 7 seconds
2019-04-03 10:11:23.456818026 ======================
2019-04-03 10:11:23.457750610 Running 'layout/recreate' stage
2019-04-03 10:11:23.458693936 ======================
2019-04-03 10:11:23.465138885 Including layout/recreate/default/100_confirm_layout_code.sh
2019-04-03 10:11:23.468886370 UserInput: called in /usr/share/rear/layout/recreate/default/100_confirm_layout_code.sh line 26
2019-04-03 10:11:23.472263195 UserInput: Default input in choices - using choice number 1 as default input
2019-04-03 10:11:23.473835144 Confirm or edit the disk recreation script
2019-04-03 10:11:23.475347308 1) Confirm disk recreation script and continue 'rear recover'
2019-04-03 10:11:23.476817144 2) Edit disk recreation script (/var/lib/rear/layout/diskrestore.sh)
2019-04-03 10:11:23.478254841 3) View disk recreation script (/var/lib/rear/layout/diskrestore.sh)
2019-04-03 10:11:23.479712687 4) View original disk space usage (/var/lib/rear/layout/config/df.txt)
2019-04-03 10:11:23.481242534 5) Use Relax-and-Recover shell and return back to here
2019-04-03 10:11:23.482655879 6) Abort 'rear recover'
2019-04-03 10:11:23.484100043 (default '1' timeout 300 seconds)
2019-04-03 10:11:26.694849357 UserInput: 'read' got as user input '1'
2019-04-03 10:11:26.698508853 User confirmed disk recreation script
2019-04-03 10:11:26.702881392 Including layout/recreate/default/200_run_layout_code.sh
2019-04-03 10:11:26.706439994 Start system layout restoration.
  Found duplicate PV 7DGexv5mGb83xwSTdIaKDHzahPeHZ87u: using /dev/disk/by-id/dm-name-mpathp-part2 not /dev/disk/by-id/dm-name-mpathi-part2
  Using duplicate PV /dev/disk/by-id/dm-name-mpathp-part2 which is last seen, replacing /dev/disk/by-id/dm-name-mpathi-part2
+++ create_component /dev/mapper/mpathp multipath
+++ local device=/dev/mapper/mpathp
+++ local type=multipath
+++ local touchfile=multipath--dev-mapper-mpathp
+++ '[' -e /tmp/rear.ZNx547vzv3GNktg/tmp/touch/multipath--dev-mapper-mpathp ']'
+++ return 0
+++ component_created /dev/mapper/mpathp multipath
+++ local device=/dev/mapper/mpathp
+++ local type=multipath
+++ local touchfile=multipath--dev-mapper-mpathp
+++ touch /tmp/rear.ZNx547vzv3GNktg/tmp/touch/multipath--dev-mapper-mpathp
+++ create_component pv:/dev/mapper/mpathp lvmdev
+++ local device=pv:/dev/mapper/mpathp
+++ local type=lvmdev
+++ local touchfile=lvmdev-pv:-dev-mapper-mpathp
+++ '[' -e /tmp/rear.ZNx547vzv3GNktg/tmp/touch/lvmdev-pv:-dev-mapper-mpathp ']'
+++ return 0
+++ LogPrint 'Creating LVM PV /dev/mapper/mpathp'
+++ Log 'Creating LVM PV /dev/mapper/mpathp'
++++ date '+%Y-%m-%d %H:%M:%S.%N '
+++ local 'timestamp=2019-04-03 10:11:26.773784532 '
+++ test 1 -gt 0
+++ echo '2019-04-03 10:11:26.773784532 Creating LVM PV /dev/mapper/mpathp'
2019-04-03 10:11:26.773784532 Creating LVM PV /dev/mapper/mpathp
+++ Print 'Creating LVM PV /dev/mapper/mpathp'
+++ test 1
+++ echo -e 'Creating LVM PV /dev/mapper/mpathp'
+++ lvm vgchange -a n INSTALL
  Found duplicate PV 7DGexv5mGb83xwSTdIaKDHzahPeHZ87u: using /dev/disk/by-id/dm-name-mpathp-part2 not /dev/disk/by-id/dm-name-mpathi-part2
  Using duplicate PV /dev/disk/by-id/dm-name-mpathp-part2 which is last seen, replacing /dev/disk/by-id/dm-name-mpathi-part2
  Volume group "INSTALL" not found
  Cannot process volume group INSTALL
+++ true
+++ lvm pvcreate -ff --yes -v --uuid 2qVfcO-mTQp-NzPW-Xphj-ezrY-HMNy-OJN7Fi --norestorefile /dev/mapper/mpathp
  Found duplicate PV 7DGexv5mGb83xwSTdIaKDHzahPeHZ87u: using /dev/disk/by-id/dm-name-mpathp-part2 not /dev/disk/by-id/dm-name-mpathi-part2
  Using duplicate PV /dev/disk/by-id/dm-name-mpathp-part2 which is last seen, replacing /dev/disk/by-id/dm-name-mpathi-part2
  Device /dev/mapper/mpathp not found (or ignored by filtering). Please run with -vvv option for more details
2019-04-03 10:11:26.978480025 UserInput: called in /usr/share/rear/layout/recreate/default/200_run_layout_code.sh line 127
2019-04-03 10:11:26.981725981 UserInput: Default input in choices - using choice number 1 as default input
2019-04-03 10:11:26.983172537 The disk layout recreation script failed
2019-04-03 10:11:26.984584945 1) Rerun disk recreation script (/var/lib/rear/layout/diskrestore.sh)
2019-04-03 10:11:26.985921211 2) View 'rear recover' log file (/var/log/rear/rear-dwrdev01res.log)
2019-04-03 10:11:26.987233692 3) Edit disk recreation script (/var/lib/rear/layout/diskrestore.sh)
2019-04-03 10:11:26.988542901 4) View original disk space usage (/var/lib/rear/layout/config/df.txt)
2019-04-03 10:11:26.989896330 5) Use Relax-and-Recover shell and return back to here
2019-04-03 10:11:26.991220698 6) Abort 'rear recover'
2019-04-03 10:11:26.992539212 (default '1' timeout 300 seconds)
2019-04-03 10:11:32.597220492 UserInput: 'read' got as user input '6'
2019-04-03 10:11:32.600844366 Error detected during restore.
2019-04-03 10:11:32.602201907 Restoring saved original /var/lib/rear/layout/disklayout.conf
2019-04-03 10:11:32.604852549 ERROR: User chose to abort 'rear recover' in /usr/share/rear/layout/recreate/default/200_run_layout_code.sh
==== Stack trace ====
Trace 0: /bin/rear:543 main
Trace 1: /usr/share/rear/lib/recover-workflow.sh:33 WORKFLOW_recover
Trace 2: /usr/share/rear/lib/framework-functions.sh:101 SourceStage
Trace 3: /usr/share/rear/lib/framework-functions.sh:49 Source
Trace 4: /usr/share/rear/layout/recreate/default/200_run_layout_code.sh:153 source
Message: User chose to abort 'rear recover' in /usr/share/rear/layout/recreate/default/200_run_layout_code.sh
== End stack trace ==
2019-04-03 10:11:32.611176109 Exiting rear recover (PID 13496) and its descendant processes
2019-04-03 10:11:33.632352243 rear,13496 /bin/rear recover
  `-rear,21026 /bin/rear recover
      `-pstree,21027 -Aplau 13496
/usr/share/rear/lib/_input-output-functions.sh: line 157: kill: (21030) - No such process
2019-04-03 10:11:33.659023366 Running exit tasks
2019-04-03 10:11:33.662400098 Finished in 18 seconds
2019-04-03 10:11:33.663666061 Removing build area /tmp/rear.ZNx547vzv3GNktg
removed directory '/tmp/rear.ZNx547vzv3GNktg'
2019-04-03 10:11:33.669452881 End of program reached