Skip to content

Connect Nintendo Joycon

strodown edited this page Aug 2, 2018 · 2 revisions

###Connect Nintendo Joycon with Recalbox

Attention this technique takes load every joycon as two independent levers, no possibility of gathering joycon in a single lever.

  • Remove the joycons of the nintendo Switch, then press the small black button place between buttons L and R.

This operation will be to renew when the lever goes out.

  • Find the Mac address of your lever:

Via putty online of order, seize this order by validating by enter.

 bluetoothctl 
  • Your lever is recognized in the form:
- [NEW DEVICE AA:88:EB:D2:59:34 JOY-CON] ( R )

Note the PIMP address of your lever ! !

  • Then seize the following commands(orders) one after the other:
Agent one
Default-agent
Power one
Scan one
  • Wait that bluetoothctl post(show) your device, then bang(type) these commands(orders):
Peer AA:88:EB:D2:59:34
AA:88:EB:D2:59:34 connect
Trust AA:88:EB:D2:59:34
  • If these commands(orders) return successfull, then your joycon is connected to your recalbox. Meeting(Appointment) in the option of levers to configure touches.

English

Basic

Advanced


Français

Basique

Avancée


Deutsch

Basic

Fortgeschritten


Español

Basic

Avanzado


Português

Básico

Avançado


Italiano

Di base

Avanzate

Clone this wiki locally
You can’t perform that action at this time.