Skip to content

Connect nintendo joycon (EN)

Laddyacris edited this page Aug 3, 2018 · 1 revision

Connect Nintendo Joycon with Recalbox

  Beware this technique supports each joycon as two independent controllers, no possibility to join the joycon in a single controller.

  • Detach the joycons of the Nintendo Switch, then press the small black button located between the L and R buttons. This operation will be repeated when the controller turns off.

  • Find the Mac address of your controller:

Via putty on the command line, enter this command by confirming with enter.

bluetoothctl
  • Your controller is recognized as:
-[NEW] Device AA:88:EB:D2:59:34 Joy-Con (R)

Write down the MAC address of your controller! !

  • Then enter the following commands one after the other:
agent on
default-agent
power on
scan on
  • Wait for bluetoothctl to display your device, then type these commands:
pair AA:88:EB:D2:59:34
connect AA:88:EB:D2:59:34
trust AA:88:EB:D2:59:34
  • If these commands return successfull, then your joycon is connected to your recalbox. Go to the joystick option to configure the keys in the Emulationstation menu.

English

Basic

Advanced


Français

Basique

Avancée


Deutsch

Basic

Fortgeschritten


Español

Basic

Avanzado


Português

Básico

Avançado


Italiano

Di base

Avanzate

Clone this wiki locally
You can’t perform that action at this time.