Skip to content

Connect your recalbox to a DVI screen (EN)

lackyluuk edited this page Aug 15, 2017 · 5 revisions

You have connected your recalbox on a DVI screen but you get a black screen?

Just edit the config.txt file and comment the line

  • hdmi_drive=2

with a #:

  • #hdmi_drive=2

Since recalbox 4.0.0, the /boot partition is read-only.
So before editing your config.txt, you must mount your /boot partition with read-write rights:

  • Get root access and type the following command: mount -o remount, rw /boot
Clone this wiki locally
You can’t perform that action at this time.