reprappro

  • Joined on
@reprappro
  • 890e363
    Updating paste Slic3r settings.
@reprappro
  • 815ace4
    Slic3r settings for paste/clay printing added.
@reprappro
  • decb4f3
    Fisher SD image added to SD images. NB - this firmware version
@reprappro
@reprappro
  • 8a1d2c8
    Library modified to add correct holes for the spade connectors.
@reprappro
  • 0d8a639
    M579 changed to M42 (which already implemented the same function...)
@reprappro
  • 3e7f551
    M579 implemented. This allows any processor pin to be set or
@reprappro
  • 4160b70
    Horizontal mount slot expanded to accommodate PCB.
@reprappro
  • @reprappro ffd49e8
    STEP Files for case added
@reprappro
  • @reprappro 68c4db8
    Instructions and BOM added
@reprappro
  • c650dcc
    Screw-hole lugs added to horizontal mount.
@reprappro
  • @reprappro f589190
    All files for RS232 Driver Added
@reprappro
  • @reprappro ed89280
    Bringing files up to date
@reprappro
reprappro created repository reprappro/Arduino-RS232
@reprappro
  • 58d20b2
    SP2525A spec clarified to make it clear that the SP2525A-1 is the
@reprappro
  • f3941d6
    Setting up printing of all the parts.
@reprappro
  • 9ddcca3
    File tidying and creating all printed-part STL files.
reprappro created branch master at reprappro/Fisher
reprappro created repository reprappro/Fisher
@reprappro
@reprappro
  • 6492ce4
    Strengtheneinmg fillet added to top strengthener.
@reprappro
  • 9a4307c
    Fixed (I think) the component numbers in the inkjet driver.
@reprappro
  • @reprappro b3086d7
    Interface PCB changed to allow 19V supply to be routed past the buck …
@reprappro
  • 2e6c8cb
    Top strengthener modified to allow access for retaining nut.
@reprappro
  • @reprappro 0df1a2b
    'Inkjet driver PCB files added'
@reprappro
  • @reprappro ce8ab8e
    Updating the Inkjet repository with all Oliver's files.
@reprappro
  • 77a54d3
    Frame strengthened to prevent splitting of the column that supports t…