[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.52-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1441 SMP Tue Aug 3 18:10:09 BST 2021 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x34000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] On node 0 totalpages: 229376 [ 0.000000] DMA zone: 2016 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 229376 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [ 0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=21f79a9a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 826024K/917504K available (10240K kernel code, 1312K rwdata, 2948K rodata, 1024K init, 863K bss, 25944K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 32043 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=1 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000020] Switching to timer-based delay loop, resolution 52ns [ 0.000310] Console: colour dummy device 80x30 [ 0.000383] printk: console [tty1] enabled [ 0.000435] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000463] pid_max: default: 32768 minimum: 301 [ 0.000669] LSM: Security Framework initializing [ 0.000912] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000935] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002386] cgroup: Disabling memory control group subsystem [ 0.002651] CPU: Testing write buffer coherency: ok [ 0.003147] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004398] Setting up static identity map for 0x100000 - 0x10003c [ 0.004585] rcu: Hierarchical SRCU implementation. [ 0.005513] smp: Bringing up secondary CPUs ... [ 0.006689] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007980] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009190] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009348] smp: Brought up 1 node, 4 CPUs [ 0.009370] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.009382] CPU: All CPU(s) started in HYP mode. [ 0.009393] CPU: Virtualization extensions available. [ 0.010492] devtmpfs: initialized [ 0.028323] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.028578] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.028608] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.031899] pinctrl core: initialized pinctrl subsystem [ 0.033071] NET: Registered protocol family 16 [ 0.037453] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.043203] audit: initializing netlink subsys (disabled) [ 0.044101] thermal_sys: Registered thermal governor 'step_wise' [ 0.045110] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.045294] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.045307] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045599] Serial: AMBA PL011 UART driver [ 0.065302] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.080119] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-03T18:18:41, variant start_x [ 0.090130] raspberrypi-firmware soc:firmware: Firmware hash is 40787ee5905644f639a2a0f6e00ae12e517a2211 [ 0.134479] Kprobes globally optimized [ 0.139761] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.142023] SCSI subsystem initialized [ 0.142285] usbcore: registered new interface driver usbfs [ 0.142361] usbcore: registered new interface driver hub [ 0.142433] usbcore: registered new device driver usb [ 0.144612] clocksource: Switched to clocksource arch_sys_counter [ 1.918457] VFS: Disk quotas dquot_6.6.0 [ 1.918579] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.918782] FS-Cache: Loaded [ 1.919025] CacheFiles: Loaded [ 1.929014] NET: Registered protocol family 2 [ 1.929294] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.930708] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.930768] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.930982] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.931175] TCP: Hash tables configured (established 8192 bind 8192) [ 1.931355] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.931411] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.932092] NET: Registered protocol family 1 [ 1.932934] RPC: Registered named UNIX socket transport module. [ 1.932947] RPC: Registered udp transport module. [ 1.932959] RPC: Registered tcp transport module. [ 1.932970] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.934998] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.938778] Initialise system trusted keyrings [ 1.939074] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.948663] zbud: loaded [ 1.950751] FS-Cache: Netfs 'nfs' registered for caching [ 1.951643] NFS: Registering the id_resolver key type [ 1.951696] Key type id_resolver registered [ 1.951708] Key type id_legacy registered [ 1.951863] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.951877] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.953080] Key type asymmetric registered [ 1.953095] Asymmetric key parser 'x509' registered [ 1.953149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.953164] io scheduler mq-deadline registered [ 1.953177] io scheduler kyber registered [ 1.956855] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.997633] Console: switching to colour frame buffer device 240x67 [ 2.032927] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 [ 2.038945] bcm2835-rng 3f104000.rng: hwrng registered [ 2.039397] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.040224] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.052576] brd: module loaded [ 2.065457] loop: module loaded [ 2.067188] Loading iSCSI transport class v2.0-870. [ 2.068939] libphy: Fixed MDIO Bus: probed [ 2.069253] usbcore: registered new interface driver lan78xx [ 2.069321] usbcore: registered new interface driver smsc95xx [ 2.069349] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.798658] Core Release: 2.80a [ 2.798676] Setting default values for core params [ 2.798706] Finished setting default values for core params [ 2.999092] Using Buffer DMA mode [ 2.999106] Periodic Transfer Interrupt Enhancement - disabled [ 2.999117] Multiprocessor Interrupt Enhancement - disabled [ 2.999133] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.999150] Dedicated Tx FIFOs mode [ 2.999750] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b4114000 dma = 0xf4114000 len=9024 [ 2.999787] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.999802] dwc_otg: Microframe scheduler enabled [ 2.999884] WARN::hcd_init_fiq:457: FIQ on core 1 [ 2.999901] WARN::hcd_init_fiq:458: FIQ ASM at 807c8de0 length 36 [ 2.999918] WARN::hcd_init_fiq:497: MPHI regs_base at b8810000 [ 2.999943] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.999985] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.000035] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 3.000091] Init: Port Power? op_state=1 [ 3.000103] Init: Power Port (0) [ 3.000470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.000488] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.000502] usb usb1: Product: DWC OTG Controller [ 3.000517] usb usb1: Manufacturer: Linux 5.10.52-v7+ dwc_otg_hcd [ 3.000531] usb usb1: SerialNumber: 3f980000.usb [ 3.001398] hub 1-0:1.0: USB hub found [ 3.001465] hub 1-0:1.0: 1 port detected [ 3.002778] dwc_otg: FIQ enabled [ 3.002791] dwc_otg: NAK holdoff enabled [ 3.002802] dwc_otg: FIQ split-transaction FSM enabled [ 3.002822] Module dwc_common_port init [ 3.003173] usbcore: registered new interface driver usb-storage [ 3.003413] mousedev: PS/2 mouse device common for all mice [ 3.004761] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.007714] sdhci: Secure Digital Host Controller Interface driver [ 3.007729] sdhci: Copyright(c) Pierre Ossman [ 3.008381] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 3.009034] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 3.009267] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.011141] ledtrig-cpu: registered to indicate activity on CPUs [ 3.011565] hid: raw HID events driver (C) Jiri Kosina [ 3.011727] usbcore: registered new interface driver usbhid [ 3.011739] usbhid: USB HID core driver [ 3.018309] Initializing XFRM netlink socket [ 3.018360] NET: Registered protocol family 17 [ 3.018530] Key type dns_resolver registered [ 3.019339] Registering SWP/SWPB emulation handler [ 3.019519] registered taskstats version 1 [ 3.019552] Loading compiled-in X.509 certificates [ 3.020432] Key type ._fscrypt registered [ 3.020447] Key type .fscrypt registered [ 3.020459] Key type fscrypt-provisioning registered [ 3.032463] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.032592] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.035146] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.036912] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.036930] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.063997] sdhost: log_buf @ (ptrval) (f4113000) [ 3.099102] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 3.100761] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.102420] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.105400] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 3.114050] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.117229] of_cfs_init [ 3.117527] of_cfs_init: OK [ 3.135387] Waiting for root device PARTUUID=21f79a9a-02... [ 3.135589] Indeed it is in host mode hprt0 = 00021501 [ 3.250723] mmc1: new high speed SDIO card at address 0001 [ 3.263088] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.267660] mmc0: new high speed SDHC card at address aaaa [ 3.268688] mmcblk0: mmc0:aaaa SC32G 29.7 GiB [ 3.272197] mmcblk0: p1 p2 [ 3.301102] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.301207] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.309043] devtmpfs: mounted [ 3.316288] Freeing unused kernel memory: 1024K [ 3.344695] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.345160] Run /sbin/init as init process [ 3.345173] with arguments: [ 3.345184] /sbin/init [ 3.345195] splash [ 3.345206] with environment: [ 3.345217] HOME=/ [ 3.345228] TERM=linux [ 3.345323] Indeed it is in host mode hprt0 = 00001101 [ 3.585059] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 3.585086] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.586157] hub 1-1:1.0: USB hub found [ 3.586290] hub 1-1:1.0: 4 ports detected [ 3.914686] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.031444] systemd[1]: System time before build time, advancing clock. [ 4.065015] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 4.065043] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.065947] hub 1-1.1:1.0: USB hub found [ 4.066057] hub 1-1.1:1.0: 3 ports detected [ 4.186359] NET: Registered protocol family 10 [ 4.187955] Segment Routing with IPv6 [ 4.276361] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.277621] systemd[1]: Detected architecture arm. [ 4.325274] systemd[1]: Set hostname to . [ 4.386068] usb 1-1.1.3: new full-speed USB device number 4 using dwc_otg [ 4.521526] usb 1-1.1.3: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 4.521562] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.521579] usb 1-1.1.3: Product: USB Receiver [ 4.521593] usb 1-1.1.3: Manufacturer: Logitech [ 4.531457] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:046D:C534.0001/input/input0 [ 4.596617] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.1.3/input0 [ 4.608092] input: Logitech USB Receiver Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/input/input1 [ 4.609195] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/input/input2 [ 4.675554] input: Logitech USB Receiver System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/input/input3 [ 4.676244] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.1.3/input1 [ 4.994733] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg [ 5.135318] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 5.135347] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.383887] random: systemd: uninitialized urandom read (16 bytes read) [ 5.402500] random: systemd: uninitialized urandom read (16 bytes read) [ 5.403316] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.403715] random: systemd: uninitialized urandom read (16 bytes read) [ 5.404796] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.408387] systemd[1]: Created slice system-getty.slice. [ 5.408454] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 5.408899] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.410278] systemd[1]: Created slice User and Session Slice. [ 5.410293] libphy: lan78xx-mdiobus: probed [ 5.411705] systemd[1]: Listening on Journal Audit Socket. [ 5.412887] systemd[1]: Listening on Journal Socket. [ 5.435203] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 5.623383] i2c /dev entries driver [ 5.826412] snd_soc_seeed_voicecard: loading out-of-tree module taints kernel. [ 6.401894] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.527010] systemd-journald[118]: Received request to flush runtime journal from PID 1 [ 7.512273] mc: Linux media interface: v0.10 [ 7.548588] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 7.551516] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.551548] [vc_sm_connected_init]: start [ 7.559361] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 7.578969] bcm2835_audio bcm2835_audio: card created with 4 channels [ 7.598274] [vc_sm_connected_init]: installed successfully [ 7.608108] bcm2835_audio bcm2835_audio: card created with 4 channels [ 7.610734] videodev: Linux video capture interface: v2.00 [ 7.639334] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 7.639340] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 7.650619] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 7.652367] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 7.666334] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 7.666739] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 7.666946] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 7.667405] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 7.667753] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 7.667789] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 7.667816] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 7.667855] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 7.667876] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 7.668138] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 8.021165] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.253193] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.370815] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 8.370896] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 8.388779] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 8.388842] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 8.412970] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 8.413053] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 8.418603] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.1.3/input0 [ 8.435150] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 8.471212] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.473297] usbcore: registered new interface driver brcmfmac [ 8.734185] random: crng init done [ 8.734210] random: 7 urandom warning(s) missed due to ratelimiting [ 8.761690] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.761871] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.787136] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 8.902507] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.1.3/input1 [ 8.970879] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 8.973011] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 8.976160] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input6 [ 8.977969] input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input7 [ 8.978509] input: Logitech Wireless Keyboard PID:4023 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input8 [ 8.978993] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3f980000.usb-1.1.3/input1:1 [ 8.981851] input: Logitech Wireless Mouse PID:4058 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/0003:046D:4058.0004/input/input13 [ 8.982693] hid-generic 0003:046D:4058.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4058] on usb-3f980000.usb-1.1.3/input1:2 [ 10.214112] input: Logitech Wireless Keyboard PID:4023 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input17 [ 10.222500] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3f980000.usb-1.1.3/input1:1 [ 10.347250] input: Logitech Wireless Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C534.0002/0003:046D:4058.0004/input/input18 [ 10.351061] logitech-hidpp-device 0003:046D:4058.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-3f980000.usb-1.1.3/input1:2 [ 12.911578] uart-pl011 3f201000.serial: no DMA platform data [ 12.915264] 8021q: 802.1Q VLAN Support v1.8 [ 13.243013] Bluetooth: Core ver 2.22 [ 13.243162] NET: Registered protocol family 31 [ 13.243175] Bluetooth: HCI device and connection manager initialized [ 13.243213] Bluetooth: HCI socket layer initialized [ 13.243236] Bluetooth: L2CAP socket layer initialized [ 13.243279] Bluetooth: SCO socket layer initialized [ 13.288095] Bluetooth: HCI UART driver ver 2.3 [ 13.288128] Bluetooth: HCI UART protocol H4 registered [ 13.288304] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.289035] Bluetooth: HCI UART protocol Broadcom registered [ 13.384780] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 14.132123] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c@7e804000/status [ 14.145032] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 14.476679] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.476710] Bluetooth: BNEP filters: protocol multicast [ 14.476760] Bluetooth: BNEP socket layer initialized [ 14.627465] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/spi@7e204000/status [ 15.007376] 8021q: adding VLAN 0 to HW filter on device eth0 [ 15.240680] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2s@7e203000/#sound-dai-cells [ 15.240714] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2s@7e203000/status [ 15.240789] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c@7e804000/status [ 15.240817] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/compatible [ 15.240833] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/seeed-voice-card,format [ 15.240847] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/seeed-voice-card,name [ 15.240858] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/status [ 15.240870] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/seeed-voice-card,bitclock-master [ 15.240883] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/seeed-voice-card,frame-master [ 15.240894] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/seeed-voice-card,channels-playback-override [ 15.240916] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/sound/seeed-voice-card,channels-capture-override [ 15.247272] ac10x i2c_id number: 0 [ 15.247291] ac10x data protocol: 0 [ 15.416507] ac10x codec count : 1 [ 15.417758] ac10x-codec 1-003b: ac108_set_sysclk freq = 24000000 clk = 0 [ 15.417775] ac108_set_sysclk :24000000 [ 20.423686] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 22.441994] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 22.551984] fuse: init (API version 7.32) [ 25.402996] bcm2835-i2s 3f203000.i2s: I2S SYNC error! [ 25.421881] bcm2835-i2s 3f203000.i2s: I2S SYNC error! [ 25.575149] Bluetooth: RFCOMM TTY layer initialized [ 25.575217] Bluetooth: RFCOMM socket layer initialized [ 25.575265] Bluetooth: RFCOMM ver 1.11 [ 72.082999] logitech-hidpp-device 0003:046D:4058.0004: HID++ 4.5 device connected. [ 165.526240] input: B8:D5:0B:EB:58:54 as /devices/virtual/input/input19 [ 168.620880] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected. [ 214.533278] bcm2835-i2s 3f203000.i2s: I2S SYNC error! [ 434.147191] input: B8:D5:0B:EB:58:54 as /devices/virtual/input/input20