Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
683 lines (585 sloc) 21.7 KB
;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2005-01-11 10:31 ******* Source: ATtiny45.xml ************
;*************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number : AVR000
;* File Name : "tn45def.inc"
;* Title : Register/Bit Definitions for the ATtiny45
;* Date : 2005-01-11
;* Version : 2.14
;* Support E-mail : avr@atmel.com
;* Target MCU : ATtiny45
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
;* SRAM is also defined
;*
;* The Register names are represented by their hexadecimal address.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;*************************************************************************
#ifndef _TN45DEF_INC_
#define _TN45DEF_INC_
#pragma partinc 0
; ***** SPECIFY DEVICE ***************************************************
.device ATtiny45
#pragma AVRPART ADMIN PART_NAME ATtiny45
.equ SIGNATURE_000 = 0x1e
.equ SIGNATURE_001 = 0x92
.equ SIGNATURE_002 = 0x06
#pragma AVRPART CORE CORE_VERSION V2
#pragma AVRPART CORE NEW_INSTRUCTIONS lpm rd,z+
; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ SREG = 0x3f
.equ SPH = 0x3e
.equ SPL = 0x3d
.equ GIMSK = 0x3b
.equ GIFR = 0x3a
.equ TIMSK = 0x39
.equ TIFR = 0x38
.equ SPMCSR = 0x37
.equ MCUCR = 0x35
.equ MCUSR = 0x34
.equ TCCR0B = 0x33
.equ TCNT0 = 0x32
.equ OSCCAL = 0x31
.equ TCCR1 = 0x30
.equ TCNT1 = 0x2f
.equ OCR1A = 0x2e
.equ OCR1C = 0x2d
.equ GTCCR = 0x2c
.equ OCR1B = 0x2b
.equ TCCR0A = 0x2a
.equ OCR0A = 0x29
.equ OCR0B = 0x28
.equ PLLCSR = 0x27
.equ CLKPR = 0x26
.equ DTVALA = 0x25
.equ DTVALB = 0x24
.equ DTPS = 0x23
.equ DWDR = 0x22
.equ WDTCR = 0x21
.equ PRR = 0x20
.equ EEARH = 0x1f
.equ EEARL = 0x1e
.equ EEDR = 0x1d
.equ EECR = 0x1c
.equ PORTB = 0x18
.equ DDRB = 0x17
.equ PINB = 0x16
.equ PCMSK = 0x15
.equ DIDR0 = 0x14
.equ GPIOR2 = 0x13
.equ GPIOR1 = 0x12
.equ GPIOR0 = 0x11
.equ USIBR = 0x10
.equ USIDR = 0x0f
.equ USISR = 0x0e
.equ USICR = 0x0d
.equ ACSR = 0x08
.equ ADMUX = 0x07
.equ ADCSRA = 0x06
.equ ADCH = 0x05
.equ ADCL = 0x04
.equ ADCSRB = 0x03
; ***** BIT DEFINITIONS **************************************************
; ***** PORTB ************************
; PORTB - Data Register, Port B
.equ PORTB0 = 0 ;
.equ PB0 = 0 ; For compatibility
.equ PORTB1 = 1 ;
.equ PB1 = 1 ; For compatibility
.equ PORTB2 = 2 ;
.equ PB2 = 2 ; For compatibility
.equ PORTB3 = 3 ;
.equ PB3 = 3 ; For compatibility
.equ PORTB4 = 4 ;
.equ PB4 = 4 ; For compatibility
.equ PORTB5 = 5 ;
.equ PB5 = 5 ; For compatibility
; DDRB - Data Direction Register, Port B
.equ DDB0 = 0 ;
.equ DDB1 = 1 ;
.equ DDB2 = 2 ;
.equ DDB3 = 3 ;
.equ DDB4 = 4 ;
.equ DDB5 = 5 ;
; PINB - Input Pins, Port B
.equ PINB0 = 0 ;
.equ PINB1 = 1 ;
.equ PINB2 = 2 ;
.equ PINB3 = 3 ;
.equ PINB4 = 4 ;
.equ PINB5 = 5 ;
; ***** ANALOG_COMPARATOR ************
; ADCSRB - ADC Control and Status Register B
.equ ACME = 6 ; Analog Comparator Multiplexer Enable
; ACSR - Analog Comparator Control And Status Register
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
.equ ACI = 4 ; Analog Comparator Interrupt Flag
.equ ACO = 5 ; Analog Compare Output
.equ ACBG = 6 ; Analog Comparator Bandgap Select
.equ AINBG = ACBG ; For compatibility
.equ ACD = 7 ; Analog Comparator Disable
; DIDR0 -
.equ AIN0D = 0 ; AIN0 Digital Input Disable
.equ AIN1D = 1 ; AIN1 Digital Input Disable
; ***** AD_CONVERTER *****************
; ADMUX - The ADC multiplexer Selection Register
.equ MUX0 = 0 ; Analog Channel and Gain Selection Bits
.equ MUX1 = 1 ; Analog Channel and Gain Selection Bits
.equ MUX2 = 2 ; Analog Channel and Gain Selection Bits
.equ MUX3 = 3 ; Analog Channel and Gain Selection Bits
.equ REFS2 = 4 ; Reference Selection Bit 2
.equ ADLAR = 5 ; Left Adjust Result
.equ REFS0 = 6 ; Reference Selection Bit 0
.equ REFS1 = 7 ; Reference Selection Bit 1
; ADCSRA - The ADC Control and Status register
.equ ADPS0 = 0 ; ADC Prescaler Select Bits
.equ ADPS1 = 1 ; ADC Prescaler Select Bits
.equ ADPS2 = 2 ; ADC Prescaler Select Bits
.equ ADIE = 3 ; ADC Interrupt Enable
.equ ADIF = 4 ; ADC Interrupt Flag
.equ ADATE = 5 ; ADC Auto Trigger Enable
.equ ADSC = 6 ; ADC Start Conversion
.equ ADEN = 7 ; ADC Enable
; ADCH - ADC Data Register High Byte
.equ ADCH0 = 0 ; ADC Data Register High Byte Bit 0
.equ ADCH1 = 1 ; ADC Data Register High Byte Bit 1
.equ ADCH2 = 2 ; ADC Data Register High Byte Bit 2
.equ ADCH3 = 3 ; ADC Data Register High Byte Bit 3
.equ ADCH4 = 4 ; ADC Data Register High Byte Bit 4
.equ ADCH5 = 5 ; ADC Data Register High Byte Bit 5
.equ ADCH6 = 6 ; ADC Data Register High Byte Bit 6
.equ ADCH7 = 7 ; ADC Data Register High Byte Bit 7
; ADCL - ADC Data Register Low Byte
.equ ADCL0 = 0 ; ADC Data Register Low Byte Bit 0
.equ ADCL1 = 1 ; ADC Data Register Low Byte Bit 1
.equ ADCL2 = 2 ; ADC Data Register Low Byte Bit 2
.equ ADCL3 = 3 ; ADC Data Register Low Byte Bit 3
.equ ADCL4 = 4 ; ADC Data Register Low Byte Bit 4
.equ ADCL5 = 5 ; ADC Data Register Low Byte Bit 5
.equ ADCL6 = 6 ; ADC Data Register Low Byte Bit 6
.equ ADCL7 = 7 ; ADC Data Register Low Byte Bit 7
; ADCSRB - ADC Control and Status Register B
.equ ADTS0 = 0 ; ADC Auto Trigger Source 0
.equ ADTS1 = 1 ; ADC Auto Trigger Source 1
.equ ADTS2 = 2 ; ADC Auto Trigger Source 2
.equ IPR = 5 ; Input Polarity Mode
.equ BIN = 7 ; Bipolar Input Mode
; DIDR0 - Digital Input Disable Register 0
.equ ADC1D = 2 ; ADC1 Digital input Disable
.equ ADC3D = 3 ; ADC3 Digital input Disable
.equ ADC2D = 4 ; ADC2 Digital input Disable
.equ ADC0D = 5 ; ADC0 Digital input Disable
; ***** USI **************************
; USIBR - USI Buffer Register
.equ USIBR0 = 0 ; USI Buffer Register bit 0
.equ USIBR1 = 1 ; USI Buffer Register bit 1
.equ USIBR2 = 2 ; USI Buffer Register bit 2
.equ USIBR3 = 3 ; USI Buffer Register bit 3
.equ USIBR4 = 4 ; USI Buffer Register bit 4
.equ USIBR5 = 5 ; USI Buffer Register bit 5
.equ USIBR6 = 6 ; USI Buffer Register bit 6
.equ USIBR7 = 7 ; USI Buffer Register bit 7
; USIDR - USI Data Register
.equ USIDR0 = 0 ; USI Data Register bit 0
.equ USIDR1 = 1 ; USI Data Register bit 1
.equ USIDR2 = 2 ; USI Data Register bit 2
.equ USIDR3 = 3 ; USI Data Register bit 3
.equ USIDR4 = 4 ; USI Data Register bit 4
.equ USIDR5 = 5 ; USI Data Register bit 5
.equ USIDR6 = 6 ; USI Data Register bit 6
.equ USIDR7 = 7 ; USI Data Register bit 7
; USISR - USI Status Register
.equ USICNT0 = 0 ; USI Counter Value Bit 0
.equ USICNT1 = 1 ; USI Counter Value Bit 1
.equ USICNT2 = 2 ; USI Counter Value Bit 2
.equ USICNT3 = 3 ; USI Counter Value Bit 3
.equ USIDC = 4 ; Data Output Collision
.equ USIPF = 5 ; Stop Condition Flag
.equ USIOIF = 6 ; Counter Overflow Interrupt Flag
.equ USISIF = 7 ; Start Condition Interrupt Flag
; USICR - USI Control Register
.equ USITC = 0 ; Toggle Clock Port Pin
.equ USICLK = 1 ; Clock Strobe
.equ USICS0 = 2 ; USI Clock Source Select Bit 0
.equ USICS1 = 3 ; USI Clock Source Select Bit 1
.equ USIWM0 = 4 ; USI Wire Mode Bit 0
.equ USIWM1 = 5 ; USI Wire Mode Bit 1
.equ USIOIE = 6 ; Counter Overflow Interrupt Enable
.equ USISIE = 7 ; Start Condition Interrupt Enable
; ***** EXTERNAL_INTERRUPT ***********
; MCUCR - MCU Control Register
.equ ISC00 = 0 ; Interrupt Sense Control 0 Bit 0
.equ ISC01 = 1 ; Interrupt Sense Control 0 Bit 1
; GIMSK - General Interrupt Mask Register
.equ GICR = GIMSK ; For compatibility
.equ PCIE = 5 ; Pin Change Interrupt Enable
.equ INT0 = 6 ; External Interrupt Request 0 Enable
; GIFR - General Interrupt Flag register
.equ PCIF = 5 ; Pin Change Interrupt Flag
.equ INTF0 = 6 ; External Interrupt Flag 0
; PCMSK - Pin Change Enable Mask
.equ PCINT0 = 0 ; Pin Change Enable Mask Bit 0
.equ PCINT1 = 1 ; Pin Change Enable Mask Bit 1
.equ PCINT2 = 2 ; Pin Change Enable Mask Bit 2
.equ PCINT3 = 3 ; Pin Change Enable Mask Bit 3
.equ PCINT4 = 4 ; Pin Change Enable Mask Bit 4
.equ PCINT5 = 5 ; Pin Change Enable Mask Bit 5
; ***** EEPROM ***********************
; EEARL - EEPROM Address Register Low Byte
.equ EEAR0 = 0 ; EEPROM Read/Write Access Bit 0
.equ EEAR1 = 1 ; EEPROM Read/Write Access Bit 1
.equ EEAR2 = 2 ; EEPROM Read/Write Access Bit 2
.equ EEAR3 = 3 ; EEPROM Read/Write Access Bit 3
.equ EEAR4 = 4 ; EEPROM Read/Write Access Bit 4
.equ EEAR5 = 5 ; EEPROM Read/Write Access Bit 5
.equ EEAR6 = 6 ; EEPROM Read/Write Access Bit 6
.equ EEAR7 = 7 ; EEPROM Read/Write Access Bit 7
; EEARH - EEPROM Address Register High Byte
.equ EEAR8 = 0 ; EEPROM Read/Write Access Bit 0
; EEDR - EEPROM Data Register
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
; EECR - EEPROM Control Register
.equ EERE = 0 ; EEPROM Read Enable
.equ EEPE = 1 ; EEPROM Write Enable
.equ EEMPE = 2 ; EEPROM Master Write Enable
.equ EERIE = 3 ; EEPROM Ready Interrupt Enable
.equ EEPM0 = 4 ; EEPROM Programming Mode Bit 0
.equ EEPM1 = 5 ; EEPROM Programming Mode Bit 1
; ***** WATCHDOG *********************
; WDTCR - Watchdog Timer Control Register
.equ WDTCSR = WDTCR ; For compatibility
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
.equ WDE = 3 ; Watch Dog Enable
.equ WDCE = 4 ; Watchdog Change Enable
.equ WDTOE = WDCE ; For compatibility
.equ WDP3 = 5 ; Watchdog Timer Prescaler Bit 3
.equ WDIE = 6 ; Watchdog Timeout Interrupt Enable
.equ WDIF = 7 ; Watchdog Timeout Interrupt Flag
; ***** TIMER_COUNTER_0 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ TOIE0 = 1 ; Timer/Counter0 Overflow Interrupt Enable
.equ OCIE0B = 3 ; Timer/Counter0 Output Compare Match B Interrupt Enable
.equ OCIE0A = 4 ; Timer/Counter0 Output Compare Match A Interrupt Enable
; TIFR - Timer/Counter0 Interrupt Flag register
.equ TOV0 = 1 ; Timer/Counter0 Overflow Flag
.equ OCF0B = 3 ; Timer/Counter0 Output Compare Flag 0B
.equ OCF0A = 4 ; Timer/Counter0 Output Compare Flag 0A
; TCCR0A - Timer/Counter Control Register A
.equ WGM00 = 0 ; Waveform Generation Mode
.equ WGM01 = 1 ; Waveform Generation Mode
.equ COM0B0 = 4 ; Compare Output Mode, Fast PWm
.equ COM0B1 = 5 ; Compare Output Mode, Fast PWm
.equ COM0A0 = 6 ; Compare Output Mode, Phase Correct PWM Mode
.equ COM0A1 = 7 ; Compare Output Mode, Phase Correct PWM Mode
; TCCR0B - Timer/Counter Control Register B
.equ CS00 = 0 ; Clock Select
.equ CS01 = 1 ; Clock Select
.equ CS02 = 2 ; Clock Select
.equ WGM02 = 3 ;
.equ FOC0B = 6 ; Force Output Compare B
.equ FOC0A = 7 ; Force Output Compare A
; TCNT0 - Timer/Counter0
.equ TCNT0_0 = 0 ;
.equ TCNT0_1 = 1 ;
.equ TCNT0_2 = 2 ;
.equ TCNT0_3 = 3 ;
.equ TCNT0_4 = 4 ;
.equ TCNT0_5 = 5 ;
.equ TCNT0_6 = 6 ;
.equ TCNT0_7 = 7 ;
; OCR0A - Timer/Counter0 Output Compare Register
.equ OCR0_0 = 0 ;
.equ OCR0_1 = 1 ;
.equ OCR0_2 = 2 ;
.equ OCR0_3 = 3 ;
.equ OCR0_4 = 4 ;
.equ OCR0_5 = 5 ;
.equ OCR0_6 = 6 ;
.equ OCR0_7 = 7 ;
; OCR0B - Timer/Counter0 Output Compare Register
;.equ OCR0_0 = 0 ;
;.equ OCR0_1 = 1 ;
;.equ OCR0_2 = 2 ;
;.equ OCR0_3 = 3 ;
;.equ OCR0_4 = 4 ;
;.equ OCR0_5 = 5 ;
;.equ OCR0_6 = 6 ;
;.equ OCR0_7 = 7 ;
; GTCCR - General Timer/Counter Control Register
.equ PSR0 = 0 ; Prescaler Reset Timer/Counter1 and Timer/Counter0
.equ TSM = 7 ; Timer/Counter Synchronization Mode
; ***** TIMER_COUNTER_1 **************
; TCCR1 - Timer/Counter Control Register
.equ CS10 = 0 ; Clock Select Bits
.equ CS11 = 1 ; Clock Select Bits
.equ CS12 = 2 ; Clock Select Bits
.equ CS13 = 3 ; Clock Select Bits
.equ COM1A0 = 4 ; Compare Output Mode, Bit 1
.equ COM1A1 = 5 ; Compare Output Mode, Bit 0
.equ PWM1A = 6 ; Pulse Width Modulator Enable
.equ CTC1 = 7 ; Clear Timer/Counter on Compare Match
; TCNT1 - Timer/Counter Register
.equ TCNT1_0 = 0 ; Timer/Counter Register Bit 0
.equ TCNT1_1 = 1 ; Timer/Counter Register Bit 1
.equ TCNT1_2 = 2 ; Timer/Counter Register Bit 2
.equ TCNT1_3 = 3 ; Timer/Counter Register Bit 3
.equ TCNT1_4 = 4 ; Timer/Counter Register Bit 4
.equ TCNT1_5 = 5 ; Timer/Counter Register Bit 5
.equ TCNT1_6 = 6 ; Timer/Counter Register Bit 6
.equ TCNT1_7 = 7 ; Timer/Counter Register Bit 7
; OCR1A - Output Compare Register
.equ OCR1A0 = 0 ; Output Compare Register A Bit 0
.equ OCR1A1 = 1 ; Output Compare Register A Bit 1
.equ OCR1A2 = 2 ; Output Compare Register A Bit 2
.equ OCR1A3 = 3 ; Output Compare Register A Bit 3
.equ OCR1A4 = 4 ; Output Compare Register A Bit 4
.equ OCR1A5 = 5 ; Output Compare Register A Bit 5
.equ OCR1A6 = 6 ; Output Compare Register A Bit 6
.equ OCR1A7 = 7 ; Output Compare Register A Bit 7
; OCR1B - Output Compare Register
.equ OCR1B0 = 0 ; Output Compare Register B Bit 0
.equ OCR1B1 = 1 ; Output Compare Register B Bit 1
.equ OCR1B2 = 2 ; Output Compare Register B Bit 2
.equ OCR1B3 = 3 ; Output Compare Register B Bit 3
.equ OCR1B4 = 4 ; Output Compare Register B Bit 4
.equ OCR1B5 = 5 ; Output Compare Register B Bit 5
.equ OCR1B6 = 6 ; Output Compare Register B Bit 6
.equ OCR1B7 = 7 ; Output Compare Register B Bit 7
; OCR1C - Output compare register
.equ OCR1C0 = 0 ;
.equ OCR1C1 = 1 ;
.equ OCR1C2 = 2 ;
.equ OCR1C3 = 3 ;
.equ OCR1C4 = 4 ;
.equ OCR1C5 = 5 ;
.equ OCR1C6 = 6 ;
.equ OCR1C7 = 7 ;
; TIMSK - Timer/Counter Interrupt Mask Register
.equ TOIE1 = 2 ; Timer/Counter1 Overflow Interrupt Enable
.equ OCIE1B = 5 ; OCIE1A: Timer/Counter1 Output Compare B Interrupt Enable
.equ OCIE1A = 6 ; OCIE1A: Timer/Counter1 Output Compare Interrupt Enable
; TIFR - Timer/Counter Interrupt Flag Register
.equ TOV1 = 2 ; Timer/Counter1 Overflow Flag
.equ OCF1B = 5 ; Timer/Counter1 Output Compare Flag 1B
.equ OCF1A = 6 ; Timer/Counter1 Output Compare Flag 1A
; GTCCR - Timer counter control register
.equ PSR1 = 1 ; Prescaler Reset Timer/Counter1
.equ FOC1A = 2 ; Force Output Compare 1A
.equ FOC1B = 3 ; Force Output Compare Match 1B
.equ COM1B0 = 4 ; Comparator B Output Mode
.equ COM1B1 = 5 ; Comparator B Output Mode
.equ PWM1B = 6 ; Pulse Width Modulator B Enable
; DTPS - Dead time prescaler register
.equ DTPS0 = 0 ;
.equ DTPS1 = 1 ;
; DTVALA - Dead time value register
.equ DTVL0 = 0 ;
.equ DTVL1 = 1 ;
.equ DTVL2 = 2 ;
.equ DTVL3 = 3 ;
.equ DTVH0 = 4 ;
.equ DTVH1 = 5 ;
.equ DTVH2 = 6 ;
.equ DTVH3 = 7 ;
; DTVALB - Dead time value B
;.equ DTVL0 = 0 ;
;.equ DTVL1 = 1 ;
;.equ DTVL2 = 2 ;
;.equ DTVL3 = 3 ;
;.equ DTVH0 = 4 ;
;.equ DTVH1 = 5 ;
;.equ DTVH2 = 6 ;
;.equ DTVH3 = 7 ;
; ***** CPU **************************
; SREG - Status Register
.equ SREG_C = 0 ; Carry Flag
.equ SREG_Z = 1 ; Zero Flag
.equ SREG_N = 2 ; Negative Flag
.equ SREG_V = 3 ; Two's Complement Overflow Flag
.equ SREG_S = 4 ; Sign Bit
.equ SREG_H = 5 ; Half Carry Flag
.equ SREG_T = 6 ; Bit Copy Storage
.equ SREG_I = 7 ; Global Interrupt Enable
; MCUCR - MCU Control Register
;.equ ISC00 = 0 ; Interrupt Sense Control 0 bit 0
;.equ ISC01 = 1 ; Interrupt Sense Control 0 bit 1
.equ SM0 = 3 ; Sleep Mode Select Bit 0
.equ SM1 = 4 ; Sleep Mode Select Bit 1
.equ SE = 5 ; Sleep Enable
.equ PUD = 6 ; Pull-up Disable
; MCUSR - MCU Status register
.equ PORF = 0 ; Power-On Reset Flag
.equ EXTRF = 1 ; External Reset Flag
.equ BORF = 2 ; Brown-out Reset Flag
.equ WDRF = 3 ; Watchdog Reset Flag
; PRR - Power Reduction Register
.equ PRADC = 0 ; Power Reduction ADC
.equ PRUSI = 1 ; Power Reduction USI
.equ PRTIM0 = 2 ; Power Reduction Timer/Counter0
.equ PRTIM1 = 3 ; Power Reduction Timer/Counter1
; OSCCAL - Oscillator Calibration Register
.equ CAL0 = 0 ; Oscillatro Calibration Value Bit 0
.equ CAL1 = 1 ; Oscillatro Calibration Value Bit 1
.equ CAL2 = 2 ; Oscillatro Calibration Value Bit 2
.equ CAL3 = 3 ; Oscillatro Calibration Value Bit 3
.equ CAL4 = 4 ; Oscillatro Calibration Value Bit 4
.equ CAL5 = 5 ; Oscillatro Calibration Value Bit 5
.equ CAL6 = 6 ; Oscillatro Calibration Value Bit 6
; PLLCSR - PLL Control and status register
.equ PLOCK = 0 ; PLL Lock detector
.equ PLLE = 1 ; PLL Enable
.equ PCKE = 2 ; PCK Enable
.equ LSM = 7 ; Low speed mode
; CLKPR - Clock Prescale Register
.equ CLKPS0 = 0 ; Clock Prescaler Select Bit 0
.equ CLKPS1 = 1 ; Clock Prescaler Select Bit 1
.equ CLKPS2 = 2 ; Clock Prescaler Select Bit 2
.equ CLKPS3 = 3 ; Clock Prescaler Select Bit 3
.equ CLKPCE = 7 ; Clock Prescaler Change Enable
; DWDR - debugWire data register
.equ DWDR0 = 0 ;
.equ DWDR1 = 1 ;
.equ DWDR2 = 2 ;
.equ DWDR3 = 3 ;
.equ DWDR4 = 4 ;
.equ DWDR5 = 5 ;
.equ DWDR6 = 6 ;
.equ DWDR7 = 7 ;
; GPIOR2 - General Purpose IO register 2
.equ GPIOR20 = 0 ;
.equ GPIOR21 = 1 ;
.equ GPIOR22 = 2 ;
.equ GPIOR23 = 3 ;
.equ GPIOR24 = 4 ;
.equ GPIOR25 = 5 ;
.equ GPIOR26 = 6 ;
.equ GPIOR27 = 7 ;
; GPIOR1 - General Purpose register 1
.equ GPIOR10 = 0 ;
.equ GPIOR11 = 1 ;
.equ GPIOR12 = 2 ;
.equ GPIOR13 = 3 ;
.equ GPIOR14 = 4 ;
.equ GPIOR15 = 5 ;
.equ GPIOR16 = 6 ;
.equ GPIOR17 = 7 ;
; GPIOR0 - General purpose register 0
.equ GPIOR00 = 0 ;
.equ GPIOR01 = 1 ;
.equ GPIOR02 = 2 ;
.equ GPIOR03 = 3 ;
.equ GPIOR04 = 4 ;
.equ GPIOR05 = 5 ;
.equ GPIOR06 = 6 ;
.equ GPIOR07 = 7 ;
; ***** BOOT_LOAD ********************
; SPMCSR - Store Program Memory Control Register
.equ SPMEN = 0 ; Store Program Memory Enable
.equ PGERS = 1 ; Page Erase
.equ PGWRT = 2 ; Page Write
.equ RFLB = 3 ; Read fuse and lock bits
.equ CTPB = 4 ; Clear temporary page buffer
; ***** LOCKSBITS ********************************************************
.equ LB1 = 0 ; Lockbit
.equ LB2 = 1 ; Lockbit
; ***** FUSES ************************************************************
; LOW fuse bits
.equ CKSEL0 = 0 ; Select Clock source
.equ CKSEL1 = 1 ; Select Clock source
.equ CKSEL2 = 2 ; Select Clock source
.equ CKSEL3 = 3 ; Select Clock source
.equ SUT0 = 4 ; Select start-up time
.equ SUT1 = 5 ; Select start-up time
.equ CKOUT = 6 ; Clock Output Enable
.equ CKDIV8 = 7 ; Divide clock by 8
; HIGH fuse bits
.equ BODLEVEL0 = 0 ; Brown-out Detector trigger level
.equ BODLEVEL1 = 1 ; Brown-out Detector trigger level
.equ BODLEVEL2 = 2 ; Brown-out Detector trigger level
.equ EESAVE = 3 ; EEPROM memory is preserved through the Chip Erase
.equ WDTON = 4 ; Watchdog Timer always on
.equ SPIEN = 5 ; Enable Serial Program and Data Downloading
.equ DWEN = 6 ; DebugWIRE Enable
.equ RSTDISBL = 7 ; External Reset disable
; EXTENDED fuse bits
.equ SELFPRGEN = 0 ; Self-Programming Enable
; ***** CPU REGISTER DEFINITIONS *****************************************
.def XH = r27
.def XL = r26
.def YH = r29
.def YL = r28
.def ZH = r31
.def ZL = r30
; ***** DATA MEMORY DECLARATIONS *****************************************
.equ FLASHEND = 0x07ff ; Note: Word address
.equ IOEND = 0x003f
.equ SRAM_START = 0x0060
.equ SRAM_SIZE = 256
.equ RAMEND = 0x015f
.equ XRAMEND = 0x0000
.equ E2END = 0x00ff
.equ EEPROMEND = 0x00ff
.equ EEADRBITS = 8
#pragma AVRPART MEMORY PROG_FLASH 4096
#pragma AVRPART MEMORY EEPROM 256
#pragma AVRPART MEMORY INT_SRAM SIZE 256
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x60
; ***** BOOTLOADER DECLARATIONS ******************************************
.equ NRWW_START_ADDR = 0x0
.equ NRWW_STOP_ADDR = 0x7ff
.equ RWW_START_ADDR = 0x0
.equ RWW_STOP_ADDR = 0x0
.equ PAGESIZE = 32
; ***** INTERRUPT VECTORS ************************************************
.equ INT0addr = 0x0001 ; External Interrupt 0
.equ PCI0addr = 0x0002 ; Pin change Interrupt Request 0
.equ OC1Aaddr = 0x0003 ; Timer/Counter1 Compare Match 1A
.equ OVF1addr = 0x0004 ; Timer/Counter1 Overflow
.equ OVF0addr = 0x0005 ; Timer/Counter0 Overflow
.equ ERDYaddr = 0x0006 ; EEPROM Ready
.equ ACIaddr = 0x0007 ; Analog comparator
.equ ADCCaddr = 0x0008 ; ADC Conversion ready
.equ OC1Baddr = 0x0009 ; Timer/Counter1 Compare Match B
.equ OC0Aaddr = 0x000a ; Timer/Counter0 Compare Match A
.equ OC0Baddr = 0x000b ; Timer/Counter0 Compare Match B
.equ WDTaddr = 0x000c ; Watchdog Time-out
.equ USI_STARTaddr = 0x000d ; USI START
.equ USI_OVFaddr = 0x000e ; USI Overflow
.equ INT_VECTORS_SIZE = 15 ; size in words
#endif /* _TN45DEF_INC_ */
; ***** END OF FILE ******************************************************