Skip to content
Permalink
Branch: master
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
240 lines (193 sloc) 9.29 KB
# EXAMPLE "local.cfg" for DSpace.
#
# Any configurations added to this file will automatically OVERRIDE configurations
# of the same name in any of the DSpace *.cfg files. This includes overriding
# settings in any of these files:
# * [dspace]/config/dspace.cfg
# * Or any configuration file that is included in 'dspace.cfg'
# (See "include = [filepath]" settings near the end of dspace.cfg.
# By default, it includes all [dspace]/config/modules/*.cfg files)
#
# By default, this EXAMPLE file includes a number of commonly overridden configurations.
# * ADD configurations by simply copying them into this file from any existing *.cfg file.
# * REMOVE configurations by simply commenting them out or deleting them below.
#
# Any commented out settings in this file are simply ignored. A configuration
# will only override another configuration if it has the EXACT SAME key/name.
# For example, including "dspace.dir" in this local.cfg will override the
# default value of "dspace.dir" in the dspace.cfg file.
# Similarly, including "oai.solr.url" in this local.cfg will override the
# default value of "oai.solr.url" in the modules/oai.cfg file.
#
##########################
# SERVER CONFIGURATION #
##########################
# DSpace installation directory.
# This is the location where you want to install DSpace.
# Windows note: Please remember to use forward slashes for all paths (e.g. C:/dspace)
dspace.dir=/dspace
# DSpace host name - should match base URL. Do not include port number
dspace.hostname = localhost
# DSpace base host URL. Include port number etc.
dspace.baseUrl = http://localhost:8080
# The user interface you will be using for DSpace. Common usage is either xmlui or jspui
####################################################
# Changed #
#dspace.ui = jspui
dspace.ui = xmlui
# Full link your end users will use to access DSpace. In most cases, this will be the baseurl followed by
# the context path to the UI you are using.
#
# Alternatively, you can use a url redirect or deploy the web application under the servlet container root.
# In this case, make sure to remove the /${dspace.ui} from the dspace.url property.
#dspace.url = ${dspace.baseUrl}/${dspace.ui}
####################################################
# Changed #
# This overrides the default value of "dspace.baseUrl" in dspace.cfg
#dspace.baseUrl = http://dspacetest.azurewebsites.net
# The overrides the default "dspace.url" setting it to the same value as my "baseUrl" above
#dspace.url = ${dspace.baseUrl}
# Name of the site
####################################################
# Changed #
dspace.name = Dspace - Azure Webapp Containers
# assetstore.dir, look at DSPACE/config/spring/api/bitstore.xml for more options
# default is ${dspace.dir}/assetstore, uncomment and modify if you need to use a different path
#assetstore.dir = ${dspace.dir}/assetstore
assetstore.dir = ${dspace.dir}/assetstore
# Default language for metadata values
####################################################
# Change defaulto to US English #
default.language = en_US
# Solr server/webapp.
# DSpace uses Solr for all search/browse capability (and for usage statistics by default).
# The included 'solr' webapp MUST be deployed to Tomcat for DSpace to function.
# Usually it will be available via port 8080 and the 'solr' context path. But,
# But, you may need to modify this if you are running DSpace on a custom port, etc.
solr.server = http://localhost:8080/solr
##########################
# DATABASE CONFIGURATION #
##########################
# DSpace only supports two database types: PostgreSQL or Oracle
# URL for connecting to database
# * Postgres template: jdbc:postgresql://localhost:5432/dspace
# * Oracle template: jdbc:oracle:thin:@//localhost:1521/xe
####################################################
# Change defaulto to work in docker-compose #
db.url = jdbc:postgresql://testedspace.postgres.database.azure.com:5432/dspace?user=dspace@testedspace&password=Pass0rd1?wx$&ssl=false
# JDBC Driver
# * For Postgres: org.postgresql.Driver
# * For Oracle: oracle.jdbc.OracleDriver
db.driver = org.postgresql.Driver
# Database Dialect (for Hibernate)
# * For Postgres: org.dspace.storage.rdbms.hibernate.postgres.DSpacePostgreSQL82Dialect
# * For Oracle: org.hibernate.dialect.Oracle10gDialect
db.dialect = org.dspace.storage.rdbms.hibernate.postgres.DSpacePostgreSQL82Dialect
# Database username and password
#db.username = dspace
#db.password = dspace
# Database Schema name
# * For Postgres, this is often "public" (default schema)
# * For Oracle, schema is equivalent to the username of your database account,
# so this may be set to ${db.username} in most scenarios.
db.schema = public
## Connection pool parameters
# Maximum number of DB connections in pool (default = 30)
#db.maxconnections = 30
# Maximum time to wait before giving up if all connections in pool are busy (milliseconds)
# (default = 5000ms or 5 seconds)
#db.maxwait = 5000
# Maximum number of idle connections in pool (-1 = unlimited)
# (default = 10)
#db.maxidle = 10
#######################
# EMAIL CONFIGURATION #
#######################
# SMTP mail server (allows DSpace to send email notifications)
#mail.server = smtp.example.com
# SMTP mail server authentication username and password (if required)
#mail.server.username = myusername
#mail.server.password = mypassword
# SMTP mail server alternate port (defaults to 25)
#mail.server.port = 25
# From address for mail
# All mail from the DSpace site will use this 'from' address
#mail.from.address = dspace-noreply@myu.edu
# When feedback is submitted via the Feedback form, it is sent to this address
# Currently limited to one recipient!
#feedback.recipient = dspace-help@myu.edu
# General site administration (Webmaster) e-mail
#mail.admin = dspace-help@myu.edu
# Recipient for server errors and alerts (defaults to mail.admin)
#alert.recipient = ${mail.admin}
# Recipient for new user registration emails (defaults to unspecified)
#registration.notify =
########################
# HANDLE CONFIGURATION #
########################
#
# Canonical Handle URL prefix
#
# Items in DSpace receive a unique URL, stored in dc.identifier.uri
# after it is generated during the submission process.
#
# If you register with CNRI's handle service at http://www.handle.net/,
# these links can be generated as permalinks using http://hdl.handle.net/
# as canonical prefix. Please make sure to change handle.canonical.prefix
# after registering with handle.net by uncommenting one of the following
# lines, depending if you prefer to use http or https:
# handle.canonical.prefix = http://hdl.handle.net/
# handle.canonical.prefix = https://hdl.handle.net/
#
# Note that this will not alter dc.identifer.uri metadata for existing
# items (only for subsequent submissions), but it will alter the URL
# in JSPUI's 'identifier' message on item record pages for existing items.
# CNRI Handle prefix
# (Defaults to a dummy/fake prefix of 123456789)
#handle.prefix = 123456789
#######################
# PROXY CONFIGURATION #
#######################
# uncomment and specify both properties if proxy server required
# proxy server for external http requests - use regular hostname without port number
#http.proxy.host =
# port number of proxy server
#http.proxy.port =
##########################
# AUTHENTICATION METHODS #
##########################
# EXAMPLE OVERRIDE:
# Override the default authentication method(s) defined in authentication.cfg
# by defining your own custom ordered list in this local.cfg.
#
# By default, all of these methods are commented out and DSpace will use the
# settings from authentication.cfg. But you may uncomment whichever plugins you
# need in order to change the default settings (or reorder them below).
#
# You may also copy default settings from the corresponding authentication-*.cfg
# configuration file and override them in this local.cfg.
# IP-based authentication/authorization. See authentication-ip.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.IPAuthentication
# LDAP authentication/authorization. See authentication-ldap.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.LDAPAuthentication
# Shibboleth authentication/authorization. See authentication-shibboleth.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.ShibAuthentication
# X.509 certificate authentication. See authentication-x509.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.X509Authentication
# Authentication by Password (encrypted in DSpace's database). See authentication-password.cfg for default configuration.
# Enabled by default in authentication.cfg
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.PasswordAuthentication
####################################################
# Changed #
##########################
# LOCALE CONFIGURATION #
##########################
default.locale = en_US
webui.supported.locales = en_US, en
##########################
# LOG CONFIGURATION #
##########################
log.init.config = ${dspace.dir}/config/log4j.properties
log.init.config = ${dspace.dir}/config/log4j-console.properties
log.dir = ${dspace.dir}/log
loglevel.dspace = INFO
You can’t perform that action at this time.