Skip to content
Configuration Utility for HC-12 433MHz wireless serial communications modules
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
HC-12 config.exe
Project1.cfg initial upload to github Aug 26, 2016
Project1.dof initial upload to github Aug 26, 2016
Project1.dpr initial upload to github Aug 26, 2016
Project1.res initial upload to github Aug 26, 2016
README.md Update README.md Aug 26, 2016
Shared.dcu
Shared.pas
Unit1.dcu initial upload to github Aug 26, 2016
Unit1.dfm
Unit1.pas
Unit2.dcu
Unit2.dfm
Unit2.pas initial upload to github Aug 26, 2016
go.bat initial upload to github Aug 26, 2016

README.md

HC-12 configuration utility

Version: R6

Small win32 utility to configure the HC-12 Wireless Serial Port Communication Module. Module should be attached to a USB to TTL serial bridge, with the SET pin tied to ground. If the SET pin is grounded before power is applied, the module will default back to the required 9600 baud.

Authors Name: Robert Rozee

You can’t perform that action at this time.