Skip to content
Rob Stave edited this page Oct 20, 2015 · 1 revision

The most important thing I need is a good indexing system. Before this, the collection of sketches I had was a mismash of poorly named files. I have added a bit of an organization here and hope to keep it consistant.

Everybody that plays with lunetta circuits knows exactly what to expect form a CD40106. They have specs. Thats what Im going for.

Another good thing about that is that it helps keep the functionality of components from turning to mud. An existing sketch can always be improved, but there is no need to do it if that functionality exists elsewhere. For example, the CD40163 is an excellent Cmos counter. It does not count up AND down however. If thats functionality thats needed, use the CD40193 instead of adding that functionality to the CD40163.

Proposed numbering is as follows

ACS-[85,84,23]-xyyy

For example the first component in the series is

ACS-85-0001

Range Description
000-199 Oscillators, Vco, LFO
200-299 Envelope generators, VCA
300-499 Modulation. Adders, Mixers, dividers, Multiplexers, Gates, Vibrato
500-699 Shift, Delay, Melody Makers, Atari Punk Console
700-899 Interface, Control, Midi, Visualization
900-999 Other

The next [x] digit is for Attiny clock.

0yyy is 8Mhz no xtal

1yyy is 1Mhz

2yyy is 16Mhz with xtal

if we run outta space...we can start over at 5.

So say we have ACS-85-0104 as PsychoLfo

If I happened to port it to say an ATTiny84 with a 16mhz xtal it would be

ACS-84-2104 as the ATTiny 84 port and

but not too important