diff --git a/docs/guides/file_sharing/samba_file_share.md b/docs/guides/file_sharing/samba_file_share.md
index 6bb67d39f7..de449a8acf 100644
--- a/docs/guides/file_sharing/samba_file_share.md
+++ b/docs/guides/file_sharing/samba_file_share.md
@@ -1,7 +1,7 @@
 ---
 title: Samba Windows File Sharing
 author: Neel Chauhan
-contributors:
+contributors: Steven Spencer
 tested_with: 9.4
 tags:
   - file transfer
@@ -10,11 +10,11 @@ tags:
 
 ## Introduction
 
-If you've ever dealt with Windows systems chances are you're aware of SMB (Server Message Block) for file sharing. If you're a seasoned Linux administrator chances are that you've heard of Samba but if you haven't, [Samba](https://www.samba.org/) is the de-facto open source implementation of SMB to enable file sharing and Active Directory access of Linux machines to Windows networks.
+If you have ever dealt with Windows systems chances are you are aware of SMB (Server Message Block) for file sharing. If you are a seasoned Linux administrator chances are that you have heard of Samba but if you have not, [Samba](https://www.samba.org/) is the de-facto open source implementation of SMB to enable file sharing and Active Directory access from Linux machines to Windows networks.
 
 ## Installation
 
-You need to install Samba from the `dnf` repositories:
+You need to install Samba using `dnf`:
 
 ```bash
 dnf install -y samba
@@ -28,7 +28,7 @@ First make a directory you want to share with Windows clients:
 mkdir /var/store
 ```
 
-Subsequently you will set the SELinux labels on the `/var/store` directory:
+Next set the SELinux labels on the `/var/store` directory:
 
 ```bash
 semanage fcontext -a -t samba_share_t  "/var/store(/.*)?"
@@ -37,7 +37,7 @@ restorecon -Rv /var/store
 
 Replace `/var/store` with the directory to be shared.
 
-Next we will configure Samba:
+Now configure Samba:
 
 ```bash
 vi /etc/samba/smb.conf
@@ -54,13 +54,13 @@ In the `smb.conf` file navigate to the bottom and insert the following:
         guest ok = yes
 ```
 
-If you're unaware of the options above, they are:
+If you are unaware of the options above, they are:
 
- * `path` is the directory we are sharing. Set this to your respective directory (`/var/store` in our case).
- * `browseable` is to allow clients to browsing access. If you wish to disallow browsing set this to `no`.
- * `writable` is to allow clients writing access. If you wish to allow write access set this to `yes`.
- * `read only` is to mark the share as read-only. If you wish to allow write or execute access set this to `no`.
- * `guest ok` is to allow non-authenticated users access to our share. If you wish to deny guests set this to `no`.
+* `path` is the directory we are sharing. Set this to your respective directory (`/var/store` in our case).
+* `browseable` is to allow clients to browsing access. If you want to disallow browsing set this to `no`.
+* `writable` is to allow clients writing access. If you want to allow write access set this to `yes`.
+* `read only` is to mark the share as read-only. If you want to allow write or execute access set this to `no`.
+* `guest ok` is to allow non-authenticated users access to our share. If you want to deny guests set this to `no`.
 
 To test the configuration you can run:
 
@@ -70,14 +70,14 @@ testparm
 
 ## Enabling Samba
 
-Ocne the configuration is okay you will open the Samba port in `firewall-cmd`:
+Once the configuration tests OK, open the Samba port in `firewall-cmd`:
 
 ```bash
 firewall-cmd --permanent --add-service=samba
 firewall-cmd --reload
 ```
 
-Nest, you can enable Samba:
+Next, you can enable Samba:
 
 ```bash
 systemctl enable --now smb nmb
@@ -87,14 +87,14 @@ systemctl enable --now smb nmb
 
 You can access the Samba share using the following URI (Note: replace `SERVER_IP` with the IP address or FQDN of your machine running Samba):
 
- * Windows: `\\SERVER_IP`
- * Linux/Mac: `smb://SERVER_IP`
+* Windows: `\\SERVER_IP`
+* Linux or Mac: `smb://SERVER_IP`
 
-`SERVER_IP` on the author's home network is `172.20.0.100` so while the instructions vary based on operating system the author will access the new share from their Fedora 40 laptop:
+`SERVER_IP` on the author's home network is `172.20.0.100` so while the instructions vary based on operating system, the author will access the new share from their Fedora 40 notebook:
 
 ![Fedora 40 Nautilus showing our Samba Share](../images/samba_nautilus.png)
 
-As you can see all files accessible on the server are also available on client machines.
+All files accessible on the server are also available on client machines.
 
 ## Conclusion