Skip to content
This repository has been archived by the owner. It is now read-only.
openchronos-ng fork with control of intertechno radio switches
C Python Perl C++ Makefile Shell Assembly
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
contrib
drivers
modules
tools
.diffexclude
Common.mk
Doxyfile
LICENSE
LICENSE-TI
Makefile
README
boot.c
diff_to_upstream.patch
even_in_range.s
modinit.h
openchronos.c
openchronos.h

README

C code that can run on an Texas Instruments EZ430-Chronos 433MHz watch [1] with a software module that implements interfacing with intertechno radio switches


 forked from:     http://openchronos-ng.sourceforge.net

 new module:      https://github.com/rodan/openchronos-rfsw
 author:          Petre Rodan <2b4eda@subdimension.ro>
 license:         GNU GPLv3

 Based on a nice tutorial by Christian M. Schmid
 http://blog.chschmid.com/?page_id=193

 Requirements:

   msp430 toolchain
   python-2.7

 Usage:

 Line1 contains FF.DD

 FF is the decimal notation of the family in which the device is placed [1-16]
                  A is 01, B is 02 ... P is 16.
                  this option must be used for doorbell/PIR device selection
 DD is the decimal notation of the device number [1-16]
                  on some factory remotes devices are placed in 4 groups,
                  in this case device 2 from group 3 is device number 10.
                  special devices like doorbell/PIRs must be set as device number 8.

 Line2 becomes 'on', 'off', 'spe' depending on what command was sent last

  if compile time option CONFIG_MOD_INTERTECHNO_PW is set then the output power is 
 selectable on Line2.

 radio glyphs come up when the command is sent.

 buttons:

 up      - send an 'on' command to the current device
 down    - send an 'off' command
 #       - send a special command (for doorbells/PIRs), make sure DD is 8 in this case.
 long *  - enter config mode. use up, down, # to select family and device, * to save.

[1] http://www.ti.com/tool/ez430-chronos
You can’t perform that action at this time.