dummy robot demo

Mikael Arguedas edited this page Jun 30, 2018 · 22 revisions

In this demo, we present a simple demo robot with all components from publishing joint states over publishing fake laser data until visualizing the robot model on a map in RViz.

Launching the demo

We assume your ROS2 installation dir as ~/ros2_ws. Please change the directories according to your platform.

To start the demo, we execute the demo bringup launch file, which we are going to explain in more details in the next section.

source ~/ros2_ws/install/setup.bash
ros2 launch dummy_robot_bringup dummy_robot_bringup.launch.py
# For ROS 2 releases prior to Bouncy, instead run:
# launch ~/ros2_ws/install/share/dummy_robot_bringup/launch/dummy_robot_bringup.py

You should see some prints inside your terminal along the lines of the following:

[INFO] [launch]: process[dummy_map_server-1]: started with pid [25812]
[INFO] [launch]: process[robot_state_publisher-2]: started with pid [25813]
[INFO] [launch]: process[dummy_joint_states-3]: started with pid [25814]
[INFO] [launch]: process[dummy_laser-4]: started with pid [25815]
Initialize urdf model from file: /home/mikael/work/ros2/bouncy_ws/install_debug_isolated/dummy_robot_bringup/share/dummy_robot_bringup/launch/single_rrbot.urdf
Parsing robot urdf xml string.
Link single_rrbot_link1 had 1 children
Link single_rrbot_link2 had 1 children
Link single_rrbot_link3 had 2 children
Link single_rrbot_camera_link had 0 children
Link single_rrbot_hokuyo_link had 0 children
got segment single_rrbot_camera_link
got segment single_rrbot_hokuyo_link
got segment single_rrbot_link1
got segment single_rrbot_link2
got segment single_rrbot_link3
got segment world
Adding fixed segment from world to single_rrbot_link1
Adding moving segment from single_rrbot_link1 to single_rrbot_link2
[INFO] [dummy_laser]: angle inc:	0.004363
[INFO] [dummy_laser]: scan size:	1081
[INFO] [dummy_laser]: scan time increment: 	0.000028
Adding moving segment from single_rrbot_link2 to single_rrbot_link3
Adding fixed segment from single_rrbot_link3 to single_rrbot_camera_link
Adding fixed segment from single_rrbot_link3 to single_rrbot_hokuyo_link

If you now open in a next terminal your RViz, you'll see your robot. 🎉

$ source <ROS2_INSTALL_FOLDER>/setup.bash
$ rviz2

This opens RViz2. Assuming you have your dummy_robot_bringup still launched, you can now add the TF display plugin and configure your global frame to world. Once you did that, you should see a similar picture:

What's happening?

If you have a closer look at the launch file, we start a couple of nodes at the same time.

  • dummy_map_server
  • dummy_laser
  • dummy_joint_states
  • robot_state_publisher

The first two packages are relatively simple. The dummy_map_server constantly publishes an empty map with a periodic update. The dummy_laser does basically the same; publishing dummy fake laser scans.

The dummy_joint_states node is publishing fake joint state data. As we are publishing a simple RRbot with only two joints, this node publishes joint states values for these two joints.

The robot_state_publisher is doing the actual interesting work. It parses the given URDF file, extracts the robot model and listens to the incoming joint states. With this information, it publishes TF values for our robot which we visualize in RViz.

Hooray!

Clone this wiki locally
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.