Perl C Eiffel
Fetching latest commit…
Cannot retrieve the latest commit at this time.
|Failed to load latest commit information.|
README - Net::SSLeay Perl module for using OpenSSL $Id$ By popular demand... -------------------- perl -MNet::SSLeay -e '($p)=Net::SSLeay::get_https("www.openssl.org", 443, "/"); print $p' Prerequisites ------------- perl-5.6.1 though anything starting from perl5.003 probably works. OpenSSL-0.9.6j or OpenSSL-0.9.7b (try http://www.openssl.org/) - This release has been tested with 0.9.6d and in historical light it seems likely that future versions will work as well (if major version number changes all bets are off, though) Note: SSLeay is no longer supported. If you want to use Net::SSLeay with SSLeay or early versions of OpenSSL, use version 1.03. The support for SSLeay was dropped due to nobody maintaining it (all active work goes on with OpenSSL) and due to incompatible API changes in OpenSSL-0.9.2b. OpenSSL-0.9.1c support has also been dropped, version 1.03 was the last one to support that. You should use the same C compiler and options to compile OpenSSL, perl, and Net::SSLeay. This is the only supported configuration. If you insist on using different compilers (perhaps because you obtained either OpenSSL or perl as binaries from a vendor and they used a compiler that you do not have) then all requests for support will be ignored. If the only way for you to use the same compiler for all three components is to recompile your openssl or perl, then that is exactly what I expect you to do before asking for support. Installing ---------- Unix: # build OpenSSL as per instructions in that package gunzip <Net-SSLeay.pm-1.35.tar.gz | tar xvf - cd Net-SSLeay.pm-1.35 perl Makefile.PL # builds and tests it make test # Run the test suite make install # You probably have to su to root to do this HPUX: In principle the Unix build should work (Makefile.PL contains special code to detect aCC), but historically there have been some problems. Marko Asplund (aspa@@kronodoc._fi) reports that he has successfully compiled on HP-UX. He used following incantations Configuring OpenSSL: ./Configure no-asm --prefix=/openssl/path hpux-parisc2-cc Configuring Net::SSLeay: OPENSSL_PREFIX=/openssl/path perl Makefile.PL CCFLAGS='-D_HPUX_SOURCE \ -Aa -I/usr/local/include +e' The magic bit seemed to be the `+e' flag. Since version 1.14 Makefile.PL tries to figure this out. He was using: gcc v2.95.2, OpenSSL v0.9.6c, Net::SSLeay-1.13 Windows: Supported on 32 and 64 bit platforms See README.Win32 for details You should also be able to use CPAN.pm to install this module if you like. Linking with RSAref is no longer supported (the patent issue is moot due to patent expiring). If you want to try it, you are on your own, but here's how it used to work... For linking against RSAref the the OPENSSL_RSAREF environment variable like this: OPENSSL_RSAREF=1 ./Makefile.PL -t # builds and tests it, link against RSAref You must previously have built OpenSSL with RSAref support (which implies first building rsaref itself), I use the RSAglue method. File librsaref.a must be found in one of the locations searched by linker (-L switches). Usually this means that you have to rename rsaref.a to librsaref.a and copy it to suitable directory, e.g. /usr/local/ssl/lib. N.B. AFAIK the patent that made using RSAref necessary has expired, so this should be nonissue by now. Problems (read this before sending mail) ---------------------------------------- Please, do not send bug report before you have - compiled your OpenSSL yourself - don't copy binaries, please - compiled your perl yourself and with substantially same CFLAGS and same C compiler (say `which cc' or `which gcc') as your OpenSSL. This is especially applicable to link errors and shared library loading problems. Please do not even dream of copying a perl binary or installing perl binary from a package. Perl's idea of calling conventions has to match OpenSSL's and unfortunately both are quite advanced pieces of code (guru duel: Larry Wall vs. Eric Young :-) with dynamic loading and who knows what - compiled my module from source against correct perl (say `which perl' and check your path). Generally my module's build process will discover correct compiler and flags from `perl -V' - tried gcc, if your vendor cc fails If you post a question or make a bug report, please remeber to mention - Your platform and OS version (i386 Linux, Sparc Solaris, etc) (uname -a) - On Linux, please report glibc version as well (ls -l /lib/libc*) - Net::SSLeay version (see tar ball) - OpenSSL version (`/usr/local/ssl/bin/openssl version') - ANSI C compiler brand and version (e.g. gcc -v) If build fails, - three compiler warnings are known to be emitted (due to lack of const in some places), one of them indicates a fatal bug in callback handling, but as I have not yet sorted it out, you'll simply have to ignore it - if you installed OpenSSL from some distribution, try getting a fresh copy from www.openssl.org and recompiling and installing it yourself - make sure you are not being confused by the fact that OpenSSL-0.9.3 changed the location of include files to /usr/local/ssl/include/openssl/* Consider deleting all old bogus headers - if using newer than supported OpenSSL, please downgrade to supported version to see if it makes difference - you must compile the module, perl, and openssl with the same C compiler and the same options. Use perl -V to check what options were used and recompile openssl and Net::SSLeay accordingly - never report bugs related to binary installs. First compile _yourself_ perl, openssl and my module, always using the same compiler and compiler flags. Many distros are known to "know better" and thus cause problems for their users. I'm not very sympathetic to having to answer end user questions thus created. - send full output of `make clean; perl Makefile.PL -t' If make test fails, please - one warning is known to be emitted between tests 4 and 5 (callback) - edit test.pl and set $trace=2 - send full output of `make clean; perl Makefile.PL -t' - send contents of sslecho.log If you have problems with a site, please - what site, what server software (including version and platform) - does it reproduce with s_client, try with something like echo 'GET /' | /usr/local/ssl/bin/openssl s_client -connect www.bacus.pt:443 - does it reproduce with popular web browsers - play with Net::SSLeay::ssl_version (see top of SSLeay.pm) - does the site run exotic configuration, e.g. insisting on specific protocol version, limiting available ciphers, using nonstandard ciphers, weird authentication arrangements, etc.) - contact the owner of the server to see what the problem looks like in his end. He should be able to tell you the exact versions used and the error messages he is seeing in his log - if you ask me to check a site out, you are granting me permission to access that site and will pay all legal expenses to defend me in court as well as any remedies that may be granted to the site in case the site decides to sue me. You warrant that you are authorized to give me permission to access the site. - if you ask me to check a site, please send me a working URL and include any authentication credentials if needed. If your site is so confidential that you can not give me an URL, then do not ask me to debug your problems. HP-UX is known to give some problems, please mail me or the mailing list so we can get these problems straightened. Hint: it has to do with dynamic loading. One user reports that adding `-lgcc' to EXTRALIBS and LD_LOAD_LIBS in Makefile fixes the problem. I have not received any confirmation whether this fix really works, but its worth a try. Another bag of problems is people installing against binary distributed perl and compiling the package with different cc or different options. Genereally this will never work. Please compile _yourself_ your perl, openssl, and the module, always with the same compiler and compiler flags. Solaris 8 does not come standard with /dev/random or /dev/urandom, and the 'make test' assumes that some source of randomness is available. 'make test' will fail on Solaris 8 if /dev/urandom is not available. The error message seen with trace enabled will be "SSL_GET_NEW_SESSION:ssl session id callback failed". In order to fix this, you must install Sun patch 112438-03 from http://sunsolve.sun.com #: unzip 112438-03.zip #: patchadd ./112438-03 You will probably need to reboot your system: #: reboot I have a report (schinder@@pobox._com) of make test segfaulting on Linux-PPC. This still needs to be investigated. No recent information has been received. It seems perl5.004 (at least some versions) has bad xsub compiler which can make builds sometimes fail. Try upgrading to perl-5.6.1 first. "Random number generator not seeded!!!" This warning indicates that randomize() was not able to read /dev/random or /dev/urandom, possibly because your system does not have them or they are differently named. You can still use SSL, but the encryption will not be as strong. Did you read the POD documentation (if you don't know what that is, just say `perldoc Net::SSLeay' or `more SSLeay.pm')? Are you sure you didn't confuse `Net::SSLeay' with `SSLeay' that comes with OpenSSL? My development environments used to be i686, Linux-2.4.3, gcc-2.92.2, glibc-2.2, perl-5.6.0, openssl-0.9.6a i686, Linux-2.4.3, gcc-2.92.2, glibc-2.2, perl5.005_02, openssl-0.9.6a i686, Linux-2.0.35, gcc-22.214.171.124, glibc-2.0.6, perl5.005_02, openssl-0.9.5a i586, Linux-2.4.3, gcc-126.96.36.199, glibc-2.2.2, perl-5.6.0, openssl-0.9.6a i586, Linux-2.4.3, gcc-188.8.131.52, glibc-2.2.2, perl5.005_03, openssl-0.9.6 i586, Linux-2.4.3, gcc-184.108.40.206, glibc-2.2.2, perl5.005_03, openssl-0.9.6a Sun-U1, SunOS-5.6, gcc-2.92.2, libc2 perl-5.6.1, openssl-0.9.6c Unfortunately I do not have access to other systems so you are somewhat on your own. Everything compiles without a warning (except those mentioned above) on my systems. Check that perl is finding your OpenSSL. If `make test' bombs, add following line to the test script that fails: $Net::SSLeay::trace = 2; and see what happens. You may also have to edit test.pl to make sure the debugging output gets printed. If `make test' prints lots of `connect: Connection refused...' errors, then sslecho.pl test server has died. It is supposed to be launched in the beginning of test.pl, but can fail if, e.g. port 1212 is taken or in TIMEWAIT state. Look also in ssleacho.log file for diagnostics. If you are really low on memory and the 1 MB tests fail, edit value of $mb variable in test.pl. If you get core dump, build your perl for debugging (add -g to ccflags, see INSTALL in perl distribution), build your SSLeay for debugging as well, add -g flag to Makefile.PL: make clean perl Makefile.PL -g make static make test_static gdb perl core # post mortem > bt # show stack trace gdb perl # run live with debugging # set break point in SSLeay.xs or in suspect function of OpenSSL > br XS_Net__SSLeay_connect > run yourscript.pl arg arg For gdb'ing make sure gdb finds all the relevant source code. This may mean that you must run perl and OpenSSL from the directories where the respective makefiles build them. You can also enable PR and PRN macros in SSLeay.xs and sprinkle even some more around the code to figure out what's happening. Some exotic configurations of perl may cause unstability: make sure OpenSSL uses the same malloc as perl. Recompile perl without threads. Try not using the PerlIO abstraction. If you need to tweak build for some platform, please let me know so I can fix it. Patches and gdb session dumps are also welcome. License and Copying ------------------- Copyright (c) 1996-2002 Sampo Kellomaki <email@example.com> Copyright (c) 2005 Florian Ragwitz <firstname.lastname@example.org> Copyright (c) 2005 Mike McCauley <email@example.com> All Rights Reserved. Distribution and use of this module is under the same terms as the OpenSSL package itself (i.e. free, but mandatory attribution; NO WARRANTY). Please consult LICENSE file in the root of the OpenSSL distribution. While the source distribution of this perl module does not contain Eric's or OpenSSL's code, if you use this module you will use OpenSSL library. Please give Eric and OpenSSL team credit (as required by their licenses). And remember, you, and nobody else but you, are responsible for auditing this module and OpenSSL library for security problems, backdoors, and general suitability for your application. Recommended reading ------------------- ===> HTTP protocol specification. It applies 100% to HTTPS too and doing password authentication is explained there. <=== If you are newbie interested in grabbing web pages from https servers, please read HTTP documentation from http://www.w3c.org/ before asking trivial questions. That document also covers the basic-auth FAQ (URLs like http://user:pass@host). Do not ask questions about authentication before consulting the HTTP specification. HTTPS is just HTTP in SSL transport. If you are doing advanced stuff, and don't find documentation you need, please try to extrapolate from OpenSSL documentation (which unfortunately is quite sparse) and the source code. If you run into build problems, especially regarding shared libraries, check your perl documentation, especially the perlxtut(1) man page, which gives excellent tutorial of the build process of XSUBs. perlxtut(1) perlxs(1) perlguts(1) perlcall(1) Say `perldoc Net::SSLeay' _NOW_! To download OpenSSL, try URL http://www.openssl.org/ Of related interest may be `http://www.symlabs.com/Net_SSLeay/smime.html' Bug reports, patch submission, feature requests, subversion access to the latest source code etc can be obtained at http://alioth.debian.org/projects/net-ssleay The developer mailing list (for people interested in contributin to the source code) can be found at http://lists.alioth.debian.org/mailman/listinfo/net-ssleay-devel