diff --git a/firmware/esp32-csi-node/README.md b/firmware/esp32-csi-node/README.md
index a3cfe28d7e..c60e59fe59 100644
--- a/firmware/esp32-csi-node/README.md
+++ b/firmware/esp32-csi-node/README.md
@@ -37,18 +37,22 @@ MSYS_NO_PATHCONV=1 docker run --rm \
 
 ### 2. Flash
 
+Offsets must match `partitions_display.csv` (8 MB) or `partitions_4mb.csv` (4 MB):
+`bootloader=0x0`, `partition-table=0x8000`, `otadata=0xf000`, `app (ota_0)=0x20000`.
+
 ```bash
 python -m esptool --chip esp32s3 --port COM7 --baud 460800 \
   write_flash --flash_mode dio --flash_size 8MB \
-  0x0 firmware/esp32-csi-node/build/bootloader/bootloader.bin \
-  0x8000 firmware/esp32-csi-node/build/partition_table/partition-table.bin \
-  0x10000 firmware/esp32-csi-node/build/esp32-csi-node.bin
+  0x0     firmware/esp32-csi-node/build/bootloader/bootloader.bin \
+  0x8000  firmware/esp32-csi-node/build/partition_table/partition-table.bin \
+  0xf000  firmware/esp32-csi-node/build/ota_data_initial.bin \
+  0x20000 firmware/esp32-csi-node/build/esp32-csi-node.bin
 ```
 
 ### 3. Provision WiFi credentials (no reflash needed)
 
 ```bash
-python scripts/provision.py --port COM7 \
+python firmware/esp32-csi-node/provision.py --port COM7 \
   --ssid "YourSSID" --password "YourPass" --target-ip 192.168.1.20
 ```
 
@@ -254,9 +258,10 @@ Find your serial port: `COM7` on Windows, `/dev/ttyUSB0` on Linux, `/dev/cu.SLAB
 ```bash
 python -m esptool --chip esp32s3 --port COM7 --baud 460800 \
   write_flash --flash_mode dio --flash_size 8MB \
-  0x0 firmware/esp32-csi-node/build/bootloader/bootloader.bin \
-  0x8000 firmware/esp32-csi-node/build/partition_table/partition-table.bin \
-  0x10000 firmware/esp32-csi-node/build/esp32-csi-node.bin
+  0x0     firmware/esp32-csi-node/build/bootloader/bootloader.bin \
+  0x8000  firmware/esp32-csi-node/build/partition_table/partition-table.bin \
+  0xf000  firmware/esp32-csi-node/build/ota_data_initial.bin \
+  0x20000 firmware/esp32-csi-node/build/esp32-csi-node.bin
 ```
 
 ### Serial Monitor
@@ -285,7 +290,7 @@ All settings can be changed at runtime via Non-Volatile Storage (NVS) without re
 The easiest way to write NVS settings:
 
 ```bash
-python scripts/provision.py --port COM7 \
+python firmware/esp32-csi-node/provision.py --port COM7 \
   --ssid "MyWiFi" \
   --password "MyPassword" \
   --target-ip 192.168.1.20
diff --git a/firmware/esp32-csi-node/provision.py b/firmware/esp32-csi-node/provision.py
index d6a0e2f0a2..b29e74638d 100644
--- a/firmware/esp32-csi-node/provision.py
+++ b/firmware/esp32-csi-node/provision.py
@@ -281,7 +281,7 @@ def main():
     if args.ssid:
         print(f"  WiFi SSID:     {args.ssid}")
     if args.password is not None:
-        print(f"  WiFi Password: {'*' * len(args.password)}")
+        print(f"  WiFi Password: {'(set)' if args.password else '(empty)'}")
     if args.target_ip:
         print(f"  Target IP:     {args.target_ip}")
     if args.target_port:
diff --git a/firmware/esp32-csi-node/test/stubs/esp_stubs.h b/firmware/esp32-csi-node/test/stubs/esp_stubs.h
index 20b4f7b825..be96f68934 100644
--- a/firmware/esp32-csi-node/test/stubs/esp_stubs.h
+++ b/firmware/esp32-csi-node/test/stubs/esp_stubs.h
@@ -153,6 +153,13 @@ typedef struct {
     uint8_t primary;
 } wifi_ap_record_t;
 
+typedef enum {
+    WIFI_PS_NONE = 0,
+    WIFI_PS_MIN_MODEM = 1,
+    WIFI_PS_MAX_MODEM = 2,
+} wifi_ps_type_t;
+
+static inline esp_err_t esp_wifi_set_ps(wifi_ps_type_t type) { (void)type; return ESP_OK; }
 static inline esp_err_t esp_wifi_set_promiscuous(bool en) { (void)en; return ESP_OK; }
 static inline esp_err_t esp_wifi_set_promiscuous_rx_cb(void *cb) { (void)cb; return ESP_OK; }
 static inline esp_err_t esp_wifi_set_promiscuous_filter(wifi_promiscuous_filter_t *f) { (void)f; return ESP_OK; }
diff --git a/scripts/provision.py b/scripts/provision.py
index f46f1543df..3222bf1017 100644
--- a/scripts/provision.py
+++ b/scripts/provision.py
@@ -213,7 +213,7 @@ def main():
     if args.ssid:
         print(f"  WiFi SSID:     {args.ssid}")
     if args.password is not None:
-        print(f"  WiFi Password: {'*' * len(args.password)}")
+        print(f"  WiFi Password: {'(set)' if args.password else '(empty)'}")
     if args.target_ip:
         print(f"  Target IP:     {args.target_ip}")
     if args.target_port:
diff --git a/scripts/qemu_swarm.py b/scripts/qemu_swarm.py
index e5cf97c6c9..5b32ccf776 100644
--- a/scripts/qemu_swarm.py
+++ b/scripts/qemu_swarm.py
@@ -259,11 +259,16 @@ def provision_node(
     if stale.exists():
         stale.unlink()
 
-    # Build provision.py arguments
+    # Build provision.py arguments.
+    # --force-partial: this is a per-node TDM/channel overlay; WiFi
+    # credentials live in the base flash image, not the per-node NVS slice.
+    # Without --force-partial, provision.py rejects calls missing the
+    # --ssid/--password/--target-ip trio (issue #391 guard).
     args = [
         sys.executable, str(PROVISION_SCRIPT),
         "--port", "/dev/null",
         "--dry-run",
+        "--force-partial",
         "--node-id", str(node.node_id),
         "--tdm-slot", str(node.tdm_slot),
         "--tdm-total", str(n_total),
diff --git a/verify b/verify
index dd7eab57d6..1b868238c8 100755
--- a/verify
+++ b/verify
@@ -19,9 +19,9 @@
 set -euo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-PROOF_DIR="${SCRIPT_DIR}/v1/data/proof"
+PROOF_DIR="${SCRIPT_DIR}/archive/v1/data/proof"
 VERIFY_PY="${PROOF_DIR}/verify.py"
-V1_SRC="${SCRIPT_DIR}/v1/src"
+V1_SRC="${SCRIPT_DIR}/archive/v1/src"
 
 # Colors (disabled if not a terminal)
 if [ -t 1 ]; then