Column token:
		---------------------------------------------------------------------------
		A   = Active
		I   = Init   (not changeable)
		R   = Reverse
		S   = Send not zero values (useful for rotary switches and pushbuttons)
		T   = Test
		LP  = Left padding
		dM  = dimming mode: 0 == off
		dT  = dimming time interval [sec.]
		dV  = dimming value
		Max = max value (range 0.0 - 1.0 only LED driver 3)
		
		For rotary switches, please check R and S for all positions.
		
		If you check one of these fields: 
		
		A  = Active
		R  = Reverse
		T  = Test
		
		Please select another field. Then the action behind the checkbox is 
		performed.
		

		Export.lua:
		---------------------------------------------------------------------------
		Package example: "File=A-10C:163=1.0:171=1.0:179=1.0:47=1.0:586=1.0:"
		The delimiter is ':'
		Switch/Load a new profile from data package ('File=A-10C:')
		The parameter 'A-10C' comes from selfData.Name. The file A-10C.xml will be 
		loaded.


		Log:
		---------------------------------------------------------------------------
		Modul == 00, Connector == 00 -> Port A  ... Arcaze USB
		Modul == 00, Connector == 01 -> Port B  ...    -"-
		Modul >= 01, Connector == 00 -> Port C  ... LED-Driver
		Modul >= 01, Connector == 01 -> Port D  ...    -"-
		Modul >= 01, Connector == 02 -> Port E  ...    -"-

		All values in HEX; Pin numbers in Dez;


		Tab 'Configuration'
		---------------------------------------------------------------------------
		Please, uncheck the checkbox 'log all actions', if you are ready with your 
		tests and configurations.
		

		Tab 'Display', 'LEDs', 'Switches' and 'Encoders'
		---------------------------------------------------------------------------
		Both checkboxes 'Active' and 'Init' must checked to get new values from a 
		record.
		

		Tab 'LEDs'
		---------------------------------------------------------------------------
		Dimming:

		dM = dimming mode: 0 == off
		dT = dimming time interval [sec.]
		dV = dimming value

		For activation of automatic dimming: value > 0.5; dM != 0
		Real dimming is only possible with LED-Driver 3, but for other LEDs you get 
		a automatic blinking.
		
		One more thing: Please use only LED-Driver 2 or LED-Driver 3 on a Arcaze.


		Tab 'Masterdata'
		---------------------------------------------------------------------------
		Table 'Device IDs' and 'Device IDs and Button IDs';

		Please look at the files device.lua and clickabledata.lua of your DCS-Modul. 
		There are all infos you need.

		For example look at:

		"... \Eagle Dynamics\DCS World\Mods\aircrafts\A-10C\Cockpit\Scripts\ ..."
		
		The infos for gauges are defined in the mainpanel_init.lua.