Skip to content
Samuel Elliott edited this page Aug 4, 2017 · 1 revision

You can enable SSH on AirPort devices by setting the dbug property to 0x3000.

With AirPyrt:

python -m acp -t {ipv4-address} -p {password} --setprop dbug 0x3000

{ipv4-address} should be the IPv4 address of the AirPort device.
{password} should be the admin password of the AirPort device.

Remember you must restart the device to change any settings.


python -m acp -t -p password --setprop dbug 0x3000
python -m acp -t -p password --reboot
You can’t perform that action at this time.