diff --git a/Doxyfile.html_cfg b/Doxyfile.html_cfg
index bba4cca..96155c1 100644
--- a/Doxyfile.html_cfg
+++ b/Doxyfile.html_cfg
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.9.1
+# Doxyfile 1.8.12
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -38,13 +38,13 @@ PROJECT_NAME           = "CCCC - C and C++ Code Counter"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 9999-git
+PROJECT_NUMBER         = 3.1.5
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
 # quick idea about the purpose of the project. Keep the description short.
 
-PROJECT_BRIEF          = "CCCC Development version (post-3.1.4)"
+PROJECT_BRIEF          = "CCCC master branch"
 
 # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
 # in the documentation. The maximum height of the logo should not exceed 55
@@ -293,6 +293,15 @@ EXTENSION_MAPPING      =
 
 MARKDOWN_SUPPORT       = YES
 
+# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
+# to that level are automatically included in the table of contents, even if
+# they do not have an id attribute.
+# Note: This feature currently applies only to Markdown headings.
+# Minimum value: 0, maximum value: 99, default value: 0.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+TOC_INCLUDE_HEADINGS   = 0
+
 # When enabled doxygen tries to link words that correspond to documented
 # classes, or namespaces to their corresponding documentation. Such a link can
 # be prevented in individual cases by putting a % sign in front of the word or
@@ -333,7 +342,7 @@ SIP_SUPPORT            = NO
 # should set this option to NO.
 # The default value is: YES.
 
-IDL_PROPERTY_SUPPORT   = YES
+IDL_PROPERTY_SUPPORT   = NO
 
 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
 # tag is set to YES then doxygen will reuse the documentation of the first
@@ -343,6 +352,13 @@ IDL_PROPERTY_SUPPORT   = YES
 
 DISTRIBUTE_GROUP_DOC   = NO
 
+# If one adds a struct or class to a group and this option is enabled, then also
+# any nested class or struct is added to the same group. By default this option
+# is disabled and one has to add nested compounds explicitly via \ingroup.
+# The default value is: NO.
+
+GROUP_NESTED_COMPOUNDS = NO
+
 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
 # (for instance a group of public functions) to be put as a subgroup of that
 # type (e.g. under the Public Functions section). Set it to NO to prevent
@@ -371,7 +387,7 @@ INLINE_GROUPED_CLASSES = NO
 # Man pages) or section (for LaTeX and RTF).
 # The default value is: NO.
 
-INLINE_SIMPLE_STRUCTS  = NO
+INLINE_SIMPLE_STRUCTS  = YES
 
 # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
 # enum is documented as struct, union, or enum with the name of the typedef. So
@@ -525,7 +541,7 @@ SHOW_INCLUDE_FILES     = YES
 # which file to include in order to use the member.
 # The default value is: NO.
 
-SHOW_GROUPED_MEMB_INC  = NO
+SHOW_GROUPED_MEMB_INC  = YES
 
 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
 # files with double quotes in the documentation rather than with sharp brackets.
@@ -732,6 +748,12 @@ WARN_IF_DOC_ERROR      = YES
 
 WARN_NO_PARAMDOC       = NO
 
+# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
+# a warning is encountered.
+# The default value is: NO.
+
+WARN_AS_ERROR          = NO
+
 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
 # can produce. The string should contain the $file, $line, and $text tags, which
 # will be replaced by the file and line number from which the warning originated
@@ -755,10 +777,11 @@ WARN_LOGFILE           =
 # The INPUT tag is used to specify the files and/or directories that contain
 # documented source files. You may enter file names like myfile.cpp or
 # directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
+# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
 INPUT                  = ./cccc
+
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
@@ -770,12 +793,17 @@ INPUT_ENCODING         = UTF-8
 
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
+# *.h) to filter out the source-files in the directories.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# read by doxygen.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
+# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.
 
 FILE_PATTERNS          =
 
@@ -819,7 +847,7 @@ EXCLUDE_PATTERNS       =
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories use the pattern */test/*
 
-EXCLUDE_SYMBOLS        =
+EXCLUDE_SYMBOLS        = */test/*
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
 # that contain example code fragments that are included (see the \include
@@ -861,6 +889,10 @@ IMAGE_PATH             =
 # Note that the filter must not add or remove lines; it is applied before the
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
 
 INPUT_FILTER           =
 
@@ -870,6 +902,10 @@ INPUT_FILTER           =
 # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
 # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
 # patterns match the file name, INPUT_FILTER is applied.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
 
 FILTER_PATTERNS        =
 
@@ -987,10 +1023,10 @@ VERBATIM_HEADERS       = YES
 # rich C++ code for which doxygen's built-in parser lacks the necessary type
 # information.
 # Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
+# generated with the -Duse-libclang=ON option for CMake.
 # The default value is: NO.
 
-CLANG_ASSISTED_PARSING = NO
+CLANG_ASSISTED_PARSING = YES
 
 # If clang assisted parsing is enabled you can provide the compiler with command
 # line options that you would normally use when invoking the compiler. Note that
@@ -1147,8 +1183,9 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
 # page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
+# to YES can help to show when doxygen was last run and thus if the
+# documentation is up to date.
+# The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 HTML_TIMESTAMP         = YES
@@ -1622,9 +1659,12 @@ COMPACT_LATEX          = NO
 PAPER_TYPE             = a4
 
 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
+# that should be included in the LaTeX output. The package can be specified just
+# by its name or with the correct syntax as to be used with the LaTeX
+# \usepackage command. To get the times font for instance you can specify :
+# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
+# To use the option intlimits with the amsmath package you can specify:
+# EXTRA_PACKAGES=[intlimits]{amsmath}
 # If left blank no extra packages will be included.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1727,6 +1767,14 @@ LATEX_SOURCE_CODE      = NO
 
 LATEX_BIB_STYLE        = plain
 
+# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_TIMESTAMP        = NO
+
 #---------------------------------------------------------------------------
 # Configuration options related to the RTF output
 #---------------------------------------------------------------------------
@@ -1980,7 +2028,7 @@ SEARCH_INCLUDES        = YES
 # preprocessor.
 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
 
-INCLUDE_PATH           = ./pccts/h
+INCLUDE_PATH           = ./cccc/ ./pccts/h
 
 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
 # patterns (like *.h and *.hpp) to filter out the header-files in the
@@ -2179,7 +2227,7 @@ GROUP_GRAPHS           = YES
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-UML_LOOK               = NO
+UML_LOOK               = YES
 
 # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
 # class node. If there are many fields or methods and many nodes the graph may
@@ -2200,7 +2248,7 @@ UML_LIMIT_NUM_FIELDS   = 10
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-TEMPLATE_RELATIONS     = NO
+TEMPLATE_RELATIONS     = YES
 
 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
 # YES then doxygen will generate a graph for each documented file showing the
@@ -2225,7 +2273,8 @@ INCLUDED_BY_GRAPH      = YES
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
+# functions only using the \callgraph command. Disabling a call graph can be
+# accomplished by means of the command \hidecallgraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2236,7 +2285,8 @@ CALL_GRAPH             = YES
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
+# functions only using the \callergraph command. Disabling a caller graph can be
+# accomplished by means of the command \hidecallergraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2259,11 +2309,15 @@ GRAPHICAL_HIERARCHY    = YES
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
+# generated by dot. For an explanation of the image formats see the section
+# output formats in the documentation of the dot tool (Graphviz (see:
+# http://www.graphviz.org/)).
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
-# Possible values are: png, jpg, gif and svg.
+# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# png:gdiplus:gdiplus.
 # The default value is: png.
 # This tag requires that the tag HAVE_DOT is set to YES.