Modular Smartphone on Raspberry Pi.
Steps for PiTalk software installation -
Open Terminal and download the code by writing:
git clone https://github.com/sbcshop/PiTalk_5.git
Your code will be downloaded to '/home/pi' directory. Use 'ls' command to check the list of directories.
Go to directory 'PiTalk_5' and run the command to change the permissions:
sudo chmod +x setup
and then run 'setup', but make sure Raspberry Pi is connected to Internet.
It will reboot your Raspberry Pi
Go to directoy 'PiTalk_5' and you will see there are two GUI files i.e. GUI5_Landscape.py and GUI5_Portrait.py. As its name indicates it will create PiTalk GUI in Landscape and Portrait mode.
Lets run the PiTalk code (Landscape or Portrait Mode). Open the terminal and write:
For Raspberry Pi 3 or 3B+ use 'ttyS0' if PiTalk is connected through GPIO or 'ttyUSB3' if connected through USB
sudo python3 ./GUI5_Landscape.py ttyS0
For other version use 'ttyAMA0' if connected through GPIO or 'ttyUSB3' if connected throught USB
sudo python3 ./GUI5_Portrait.py ttyAMA0
Note: Default it will take 'ttyS0' port. It means if you simply write :
It will also work but for Raspberry Pi 3 or 3B+ only.
This will run PiTalk code on HDMI screen. If you want to run this code on 5" LCD, go to 'setting' app and go to 'Screen Orientation'. You will see diffrent orientation at different angles. Click to any angle will reboot your Raspberry Pi and start GUI on 5" LCD.
Now to run the PiTalk code on 5" LCD, repeat Step 5
For more details, go to http://pitalk.co.uk/
For blogs and projects, go to http://sb-components.co.uk/pitalk-blog.html
Go to https://shop.sb-components.co.uk/ to order your PiTalk now