Project name: specci48

Description: Sinclair ZX spectrum48 emulator on stm32f103c8t6 & ILI9341 SPI display

Installation on ubuntu:

• git clone https://github.com/sdima1357/specci48
• cd specci48
• make
• .. connect hardware
• ./load.sh

Status:

Work in progress... Right now only proof of concept https://youtu.be/n4u6VNxCTdA

today i have recieved new blue pill board . Seems that not every board the same , part of them 64K Older board (same price) was have 128K flash

On ili9341 board You must close(short) jumper J1 to 3.3v .Check board documentation... 5 volt can damage your stm32 Touch,Display and SD card use common (3 wire CLK,MISO,MOSI) SPI1 interface. Chip selects are different.

Credits:

1. Sir Clive Marles Sinclair

2. started from here: gorien for stm32f4 (last version very simular to fuse,same macros) http://forum.easyelectronics.ru/viewtopic.php?f=35&t=16592&start=150

3. most tricks from here, but simplified & reduced and added partially instruction decoding: fuse (http://fuse-emulator.sourceforge.net/)

4. baseline display routines from: fagcinsk (https://github.com/fagcinsk/stm-ILI9341-spi/)

5. touch from here,completely rewritten calibration by LS 6 points: martnak (https://github.com/martnak/STM32-ILI9341)

6. stm32 libraries from st (http://www.st.com/content/st_com/en.html)