diff --git a/docs/bridge-relayers-claim-rewards.png b/docs/bridge-relayers-claim-rewards.png new file mode 100644 index 000000000000..d56b8dd871e8 Binary files /dev/null and b/docs/bridge-relayers-claim-rewards.png differ diff --git a/docs/bridge-relayers-deregister.png b/docs/bridge-relayers-deregister.png new file mode 100644 index 000000000000..e7706cee7891 Binary files /dev/null and b/docs/bridge-relayers-deregister.png differ diff --git a/docs/bridge-relayers-register.png b/docs/bridge-relayers-register.png new file mode 100644 index 000000000000..e9e3e1b5ac87 Binary files /dev/null and b/docs/bridge-relayers-register.png differ diff --git a/docs/running-relayer.md b/docs/running-relayer.md new file mode 100644 index 000000000000..cda127cf0a8a --- /dev/null +++ b/docs/running-relayer.md @@ -0,0 +1,344 @@ +# Running your own bridge relayer + +:warning: :construction: Please read the [Disclaimer](#disclaimer) section first :construction: :warning: + +## Disclaimer + +There are several things you should know before running your own relayer: + +- initial bridge version (we call it bridges v1) supports any number of relayers, but **there's no guaranteed +compensation** for running a relayer and/or submitting valid bridge transactions. Most probably you'll end up +spending more funds than getting from rewards - please accept this fact; + +- even if your relayer has managed to submit a valid bridge transaction that has been included into the bridge +hub block, there's no guarantee that you will be able to claim your compensation for that transaction. That's +because compensations are paid from the account, controlled by relay chain governance and it could have no funds +to compensate your useful actions. We'll be working on a proper process to resupply it on-time, but we can't +provide any guarantee until that process is well established. + +## A Brief Introduction into Relayers and our Compensations Scheme + +Omitting details, relayer is an offchain process that is connected to both bridged chains. It looks at the +outbound bridge messages queue and submits message delivery transactions to the target chain. There's a lot +of details behind that simple phrase - you could find more info in the +[High-Level Bridge Overview](./high-level-overview.md) document. + +Reward that is paid to relayer has two parts. The first part static and is controlled by the governance. +It is rather small initially - e.g. you need to deliver `10_000` Kusama -> Polkadot messages to gain single +KSM token. + +The other reward part is dynamic. So to deliver an XCM message from one BridgeHub to another, we'll need to +submit two transactions on different chains. Every transaction has its cost, which is: + +- dynamic, because e.g. message size can change and/or fee factor of the target chain may change; + +- quite large, because those transactions are quite heavy (mostly in terms of size, not weight). + +We are compensating the cost of **valid**, **minimal** and **useful** bridge-related transactions to +relayer, that has submitted such transaction. Valid here means that the transaction doesn't fail. Minimal +means that all data within transaction call is actually required for the transaction to succeed. Useful +means that all supplied data in transaction is new and yet unknown to the target chain. + +We have implemented a relayer that is able to craft such transactions. The rest of document contains a detailed +information on how to deploy this software on your own node. + +## Relayers Concurrency + +As it has been said above, we are not compensating cost of transactions that are not **useful**. For +example, if message `100` has already been delivered from Kusama Bridge Hub to Polkadot Bridge Hub, then another +transaction that delivers the same message `100` won't be **useful**. Hence, no compensation to relayer that +has submitted that second transaction. + +But what if there are several relayers running? They are noticing the same queued message `100` and +simultaneously submit identical message delivery transactions. You may expect that there'll be one lucky +relayer, whose transaction would win the "race" and which will receive the compensation and reward. And +there'll be several other relayers, losing some funds on their unuseful transactions. + +But actually, we have a solution that invalidates transactions of "unlucky" relayers before they are +included into the block. So at least you may be sure that you won't waste your funds on duplicate transactions. + +
+Some details? + +All **unuseful** transactions are rejected by our +[transaction extension](https://github.com/paritytech/polkadot-sdk/blob/master/bridges/bin/runtime-common/src/refund_relayer_extension.rs), +which also handles transaction fee compensations. You may find more info on unuseful (aka obsolete) transactions +by lurking in the code. + +We also have the WiP prototype of relayers coordination protocol, where relayers will get some guarantee +that their transactions will be prioritized over other relayers transactions at their assigned slots. +That is planned for the future version of bridge and the progress is +[tracked here](https://github.com/paritytech/parity-bridges-common/issues/2486). + +
+ +## Prerequisites + +Let's focus on the bridge between Polkadot and Kusama Bridge Hubs. Let's also assume that we want to start +a relayer that "serves" an initial lane [`0x00000001`](https://github.com/polkadot-fellows/runtimes/blob/9ce1bbbbcd7843b3c76ba4d43c036bc311959e9f/system-parachains/bridge-hubs/bridge-hub-kusama/src/bridge_to_polkadot_config.rs#L54). + +
+Lane? + +Think of lane as a queue of messages that need to be delivered to the other/bridged chain. The lane is +bidirectional, meaning that there are four "endpoints". Two "outbound" endpoints (one at every chain), contain +messages that need to be delivered to the bridged chain. Two "inbound" are accepting messages from the bridged +chain and also remember the relayer, who has delivered message(s) to reward it later. + +
+ +The same steps may be performed for other lanes and bridges as well - you'll just need to change several parameters. + +So to start your relayer instance, you'll need to prepare: + +- an address of ws/wss RPC endpoint of the Kusama relay chain; + +- an address of ws/wss RPC endpoint of the Polkadot relay chain; + +- an address of ws/wss RPC endpoint of the Kusama Bridge Hub chain; + +- an address of ws/wss RPC endpoint of the Polkadot Bridge Hub chain; + +- an account on Kusama Bridge Hub; + +- an account on Polkadot Bridge Hub. + +For RPC endpoints, you could start your own nodes, or use some public community nodes. Nodes are not meant to be +archive or provide access to insecure RPC calls. + +To create an account on Bridge Hubs, you could use XCM teleport functionality. E.g. if you have an account on +the relay chain, you could use the `teleportAssets` call of `xcmPallet` and send asset +`V3 { id: Concrete(0, Here), Fungible: }` to beneficiary `V3(0, X1(AccountId32()))` +on destination `V3(0, X1(Parachain(1002)))`. To estimate amounts you need, please refer to the [Costs](#costs) +section of the document. + +## Registering your Relayer Account (Optional, But Please Read) + +Bridge transactions are quite heavy and expensive. We want to minimize block space that can be occupied by +invalid bridge transactions and prioritize valid transactions over invalid. That is achieved by **optional** +relayer registration. Transactions, signed by relayers with active registration, gain huge priority boost. +In exchange, such relayers may be slashed if they submit **invalid** or **non-minimal** transaction. + +Transactions, signed by relayers **without** active registration, on the other hand, receive no priority +boost. It means that if there is active registered relayer, most likely all transactions from unregistered +will be counted as **unuseful**, not included into the block and unregistered relayer won't get any reward +for his operations. + +Before registering, you should know several things about your funds: + +- to register, you need to hold significant amount of funds on your relayer account. As of now, it is + [100 KSM](https://github.com/polkadot-fellows/runtimes/blob/9ce1bbbbcd7843b3c76ba4d43c036bc311959e9f/system-parachains/bridge-hubs/bridge-hub-kusama/src/bridge_to_polkadot_config.rs#L71C14-L71C43) + for registration on Kusama Bridge Hub and + [500 DOT](https://github.com/polkadot-fellows/runtimes/blob/9ce1bbbbcd7843b3c76ba4d43c036bc311959e9f/system-parachains/bridge-hubs/bridge-hub-polkadot/src/bridge_to_kusama_config.rs#L71C14-L71C43) + for registration on Polkadot Bridge Hub; + +- when you are registered, those funds are reserved on relayer account and you can't transfer them. + +The registration itself, has three states: active, inactive or expired. Initially, it is active, meaning that all +your transactions that are **validated** on top of block, where it is active get priority boost. Registration +becomes expired when the block with the number you have specified during registration is "mined". It is the +`validTill` parameter of the `register` call (see below). After that `validTill` block, you may unregister and get +your reserved funds back. There's also an intermediate point between those blocks - it is the `validTill - LEASE`, +where `LEASE` is the the chain constant, controlled by the governance. Initially it is set to `300` blocks. +All your transactions, **validated** between the `validTill - LEASE` and `validTill` blocks do not get the +priority boost. Also, it is forbidden to specify `validTill` such that the `validTill - currentBlock` is less +than the `LEASE`. + +
+Example? + +| Bridge Hub Block | Registration State | Comment | +| ----------------- | ------------------ | ------------------------------------------------------ | +| 100 | Active | You have submitted a tx with the `register(1000)` call | +| 101 | Active | Your message delivery transactions are boosted | +| 102 | Active | Your message delivery transactions are boosted | +| ... | Active | Your message delivery transactions are boosted | +| 700 | Inactive | Your message delivery transactions are not boosted | +| 701 | Inactive | Your message delivery transactions are not boosted | +| ... | Inactive | Your message delivery transactions are not boosted | +| 1000 | Expired | Your may submit a tx with the `deregister` call | + +
+ +So once you have enough funds on your account and have selected the `validTill` parameter value, you +could use the Polkadot JS apps to submit an extrinsic. If you want priority boost for your transactions +on the Kusama Bridge Hub, open the +[Polkadot JS Apps](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Fkusama-bridge-hub-rpc.polkadot.io#/extrinsics) +and submit the `register` extrinsic from the `bridgeRelayers` pallet: + +![Register Extrinsic](./bridge-relayers-register.png) + +To deregister, submit the simple `deregister` extrinsic when registration is expired: + +![Deregister Extrinsic](./bridge-relayers-deregister.png) + +At any time, you can prolong your registration by calling the `register` with the larger `validTill`. + +## Costs + +Your relayer account (on both Bridge Hubs) must hold enough funds to be able to pay costs of bridge +transactions. If your relayer behaves correctly, those costs will be compensated and you will be +able to claim it later. + +**IMPORTANT**: you may add tip to your bridge transactions to boost their priority. But our +compensation mechanism never refunds transaction tip, so all tip tokens will be lost. + +
+Types of bridge transactions + +There are two types of bridge transactions: + +- message delivery transaction brings queued message(s) from one Bridge Hub to another. We record + the fact that this specific (your) relayer has delivered those messages; + +- message confirmation transaction confirms that some message have been delivered and also brings + back information on how many messages (your) relayer has delivered. We use this information later + to register delivery rewards on the source chain. + +Several messages/confirmations may be included in a single bridge transaction. Apart from this +data, bridge transaction may include finality and storage proofs, required to prove authenticity of +this data. + +
+ +To deliver and get reward for a single message, the relayer needs to submit two transactions. One +at the source Bridge Hub and one at the target Bridge Hub. Below are costs for Polkadot <> Kusama +messages (as of today): + +- to deliver a single Polkadot -> Kusama message, you would need to pay around `0.06 KSM` at Kusama + Bridge Hub and around `1.62 DOT` at Polkadot Bridge Hub; + +- to deliver a single Kusama -> Polkadot message, you would need to pay around `1.70 DOT` at Polkadot + Bridge Hub and around `0.05 KSM` at Kusama Bridge Hub. + +Those values are not constants - they depend on call weights (that may change from release to release), +on transaction sizes (that depends on message size and chain state) and congestion factor. In any +case - it is your duty to make sure that the relayer has enough funds to pay transaction fees. + +## Claiming your Compensations and Rewards + +Hopefully you have successfully delivered some messages and now can claim your compensation and reward. +This requires submitting several transactions. But first, let's check that you actually have something to +claim. For that, let's check the state of the pallet that tracks all rewards. + +To check your rewards at the Kusama Bridge Hub, go to the +[Polkadot JS Apps](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Fkusama-bridge-hub-rpc.polkadot.io#/chainstate) +targeting Kusama Bridge Hub, select the `bridgeRelayers` pallet, choose `relayerRewards` map and +your relayer account. Then: + +- set the `laneId` to `0x00000001` + +- set the `bridgedChainId` to `bhpd`; + +- check the both variants of the `owner` field: `ThisChain` is used to pay for message delivery transactions + and `BridgedChain` is used to pay for message confirmation transactions. + +If check shows that you have some rewards, you can craft the claim transaction, with similar parameters. +For that, go to `Extrinsics` tab of the +[Polkadot JS Apps](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Fkusama-bridge-hub-rpc.polkadot.io#/extrinsics) +and submit the following transaction (make sure to change `owner` before): + +![Claim Rewards Extrinsic](./bridge-relayers-claim-rewards.png) + +To claim rewards on Polkadot Bridge Hub you can follow the same process. The only difference is that you +need to set value of the `bridgedChainId` to `bhks`. + +## Starting your Relayer + +### Starting your Rococo <> Westend Relayer + +We are using the following docker image to run our own Rococo <> Westend relayer: + +[paritytech/bridges-common-relay:v2024-02-16-rococo-westend-relayer](https://hub.docker.com/layers/paritytech/bridges-common-relay/v2024-02-16-rococo-westend-relayer/images/sha256-5ba4260d6bc2ac9e97c2e05d875f6dc44ee9265011311f268b66b8a5a672ada3?context=explore) + +You can grab the sources and build it manually: + +[v2024-02-16-rococo-westend-relayer](https://github.com/paritytech/parity-bridges-common/releases/tag/v2024-02-16-rococo-westend-relayer) + +Once you have the docker, update variables and run the following script: +```sh +export DOCKER_IMAGE= + +export ROCOCO_HOST= +export ROCOCO_PORT= +# or set it to '--rococo-secure' if wss is used above +export ROCOCO_IS_SECURE= +export BRIDGE_HUB_ROCOCO_HOST= +export BRIDGE_HUB_ROCOCO_PORT= +# or set it to '--bridge-hub-rococo-secure' if wss is used above +export BRIDGE_HUB_ROCOCO_IS_SECURE= +export BRIDGE_HUB_ROCOCO_KEY_FILE= + +export WESTEND_HOST= +export WESTEND_PORT= +# or set it to '--westend-secure' if wss is used above +export WESTEND_IS_SECURE= +export BRIDGE_HUB_WESTEND_HOST= +export BRIDGE_HUB_WESTEND_PORT= +# or set it to '--bridge-hub-westend-secure ' if wss is used above +export BRIDGE_HUB_WESTEND_IS_SECURE= +export BRIDGE_HUB_WESTEND_KEY_FILE= + +# you can get extended relay logs (e.g. for debugging issues) by passing `-e RUST_LOG=bridge=trace` +# argument to the `docker` binary +docker run \ + -v $BRIDGE_HUB_ROCOCO_KEY_FILE:/bhr.key \ + -v $BRIDGE_HUB_WESTEND_KEY_FILE:/bhw.key \ + $DOCKER_IMAGE \ + relay-headers-and-messages bridge-hub-rococo-bridge-hub-westend \ + --rococo-host $ROCOCO_HOST \ + --rococo-port $ROCOCO_PORT \ + $ROCOCO_IS_SECURE \ + --rococo-version-mode Auto \ + --bridge-hub-rococo-host $BRIDGE_HUB_ROCOCO_HOST \ + --bridge-hub-rococo-port $BRIDGE_HUB_ROCOCO_PORT \ + $BRIDGE_HUB_ROCOCO_IS_SECURE \ + --bridge-hub-rococo-version-mode Auto \ + --bridge-hub-rococo-signer-file /bhr.key \ + --bridge-hub-rococo-transactions-mortality 16 \ + --westend-host $WESTEND_HOST \ + --westend-port $WESTEND_PORT \ + $WESTEND_IS_SECURE \ + --westend-version-mode Auto \ + --bridge-hub-westend-host $BRIDGE_HUB_WESTEND_HOST \ + --bridge-hub-westend-port $BRIDGE_HUB_WESTEND_PORT \ + $BRIDGE_HUB_WESTEND_IS_SECURE \ + --bridge-hub-westend-version-mode Auto \ + --bridge-hub-westend-signer-file /bhw.key \ + --bridge-hub-westend-transactions-mortality 16 \ + --lane 00000002 +``` + +### Starting your Polkadot <> Kusama Relayer + +*Work in progress, coming soon* + +### Watching your relayer state + +Our relayer provides some Prometheus metrics that you may convert into some fancy Grafana dashboards +and alerts. By default, metrics are exposed at port `9616`. To expose endpoint to the localhost, change +the docker command by adding following two lines: + +```sh +docker run \ + .. + -p 127.0.0.1:9616:9616 \ # tell Docker to bind container port 9616 to host port 9616 + # and listen for connections on the host' localhost interface + .. + $DOCKER_IMAGE \ + relay-headers-and-messages bridge-hub-rococo-bridge-hub-westend \ + --prometheus-host 0.0.0.0 \ # tell `substrate-relay` binary to accept Prometheus endpoint + # connections from everywhere + .. +``` + +You can find more info on configuring Prometheus and Grafana in the +[Monitor your node](https://wiki.polkadot.network/docs/maintain-guides-how-to-monitor-your-node) +guide from Polkadot wiki. + +We have our own set of Grafana dashboards and alerts. You may use them for inspiration. +Please find them in this folder: + +- for Rococo <> Westend bridge: [rococo-westend](https://github.com/paritytech/parity-bridges-common/tree/master/deployments/bridges/rococo-westend). + +- for Polkadot <> Kusama bridge: *work in progress, coming soon*