Hooks-based WebGL library for React
This library is experimental.
npm install @react-vertex/core
I started working on this to try out hooks and learn more about WebGL. It quickly got out of hand. There's a lot to do still.
All the demos on the site are in the demos folder
- Scene renderer using React Reconciler
- Scene graph which handles matrix multiplication
- Basic lighting system (only point lights so far)
- Orbit camera and controls
- Hooks for geometries and materials
- Dat Gui like dev controls and scene helpers
Keep in mind these sandboxes run in "development" mode and, just like for React, that makes a significant difference in performance for this library.
- Sphere of Spheres - Basic scene with Phong shading and a single point light.
- Sphere Wireframe - Simple sphere wireframe example with axes.
- Starter Sandbox - Starter sandbox with axes.
React components, renderer and hooks for React Vertex.
npm install @react-vertex/core
React hooks for working with geometries in React Vertex.
npm install @react-vertex/geometry-hooks
React hooks for working with materials in React Vertex.
npm install @react-vertex/material-hooks
React hooks for working with vectors and matrices in React Vertex. Almost all of this is gl-matrix so this adds very little to your bundle. The core also relies on gl-matrix.
npm install @react-vertex/math-hooks
React hooks for a basic orbit camera and controls. Almost all of this is gl-matrix so this adds very little to your bundle. The core also relies on gl-matrix.
npm install @react-vertex/orbit-camera
Inside of a <Canvas />
component you are no longer building an HTML document. Instead, a React Vertex scene is built of four primary elements: <camera>
, <group>
, <material>
and <geometry>
. You use the elements to build up the WebGL state used by the renderer.
At its most simple, a scene would look like:
<camera>
<material>
<geometry />
</material>
</camera>
Or something like:
<camera>
<group>
<material>
<group>
<geometry />
<geometry />
<geometry />
</group>
</material>
<material>
<group>
<material>
<geometry />
</material>
<geometry />
<geometry />
</group>
</material>
</group>
</camera>
Of course, you can create your own custom components to build up that document however you like:
<camera>
<group>
<Asteroids />
<Robots />
{showSharks ? (
<group>
<Shark weapon={laserBeam} />
<Shark weapon={laserBeam} />
</group>
) : null}
</group>
<SeaBass illTempered={true} />
</camera>
The camera takes just two props that define the view
(matrix) and the projection
(matrix):
<camera view={view} projection={projection}>
<material>
<geometry />
<geometry />
<geometry />
</material>
</camera>
The view
and projection
should be instances of gl-matrix mat4. If you already know how to work with gl-matrix
then you can use whatever method you like to keep those props up to date. You can mutate the matrices and the changes will be reflected in the render.
For convenience you can use @react-vertex/math-hooks
to create a static camera view:
import {
useInvertedMatrix,
usePerspectiveMatrix,
} from '@react-vertex/math-hooks'
function Scene() {
const view = useInvertedMatrix(0, 0, 50)
const projection = usePerspectiveMatrix(35, 1.0, 0.1, 1000)
...
return (
<camera view={view} projection={projection}>
...
</camera>
)
Or use @react-vertex/orbit-camera
to create a dynamic camera:
import { useOrbitCamera, useOrbitControls } from '@react-vertex/orbit-camera'
import { useCanvasSize } from '@react-vertex/core'
function Scene() {
const { width, height } = useCanvasSize()
const camera = useOrbitCamera(55, width / height, 1, 5000)
useOrbitControls(camera)
...
return (
<camera view={camera.view} projection={camera.projection}>
...
</camera>
)
Right now, the material nodes just take a single program
prop. The program
is a WebGL program returned from a hook. The nearest <camera>
ancestor will define the view and projection. The renderer will set viewMatrix
, modelMatrix
and projectionMatrix
uniforms in the program shaders. You can use @react-vertex/material-hooks
for some common programs or look at the source to compose your own custom program hooks. The Phong and Lambert programs in @react-vertex/material-hooks
make use of lights in the scene.
import React from 'react'
import PropTypes from 'prop-types'
import { useHex } from '@react-vertex/color-hooks'
import { useSphereElements } from '@react-vertex/geometry-hooks'
import { useBasicSolid } from '@react-vertex/material-hooks'
function Example({ position }) {
const sphere = useSphereElements(0.75, 10, 10)
const diffuse = useHex('#ffa500', true)
const program = useBasicSolid(diffuse)
return (
<material program={program}>
<geometry position={position} {...sphere} />
</material>
)
}
Example.propTypes = {
position: PropTypes.array.isRequired,
}
export default Example
The <geometry>
element defines the attributes and several other parameters for drawing. You can also set the position
, rotation
and scale
. The nearest <material>
ancestor will define what program is applied to the geometries. Probably, the easiest way to get started is to use the hooks from @react-vertex/geometry-hooks
.
import React from 'react'
import { useVector3 } from '@react-vertex/math-hooks'
import { useBoxElements } from '@react-vertex/geometry-hooks'
const PI = Math.PI
function Boxes() {
const boxElements = useBoxElements(10, 10, 10)
const r1 = useVector3(PI / 4, PI, 0)
const p1 = useVector3(10, 0, 0)
const p2 = useVector3(20, 0, 0)
const p3 = useVector3(30, 0, 0)
const p4 = useVector3(40, 0, 0)
return (
<group rotation={r1}>
<geometry position={p1} {...boxElements} />
<geometry position={p2} {...boxElements} />
<geometry position={p3} {...boxElements} />
<geometry position={p4} {...boxElements} />
</group>
)
}
To get more control over the geometry buffers and attributes you can use some of the more low-level hooks from the @react-vertex/core
:
import React, { Fragment, useMemo } from 'react'
import { useVector3 } from '@react-vertex/math-hooks'
import { useBoxGeometry } from '@react-vertex/geometry-hooks'
import {
useWebGLContext,
useStaticBuffer,
useAttribute,
} from '@react-vertex/core'
function Boxes() {
const geometry = useBoxGeometry(10, 10, 10)
// this is what "useBoxElements" does internally...
const gl = useWebGLContext()
const positionBuffer = useStaticBuffer(gl, geometry.vertices, false, 'F32')
const position = useAttribute(gl, 3, positionBuffer)
const normalBuffer = useStaticBuffer(gl, geometry.normals, false, 'F32')
const normal = useAttribute(gl, 3, normalBuffer)
const uvBuffer = useStaticBuffer(gl, geometry.uvs, false, 'F32')
const uv = useAttribute(gl, 2, uvBuffer)
const indexBuffer = useStaticBuffer(gl, geometry.indices, true, 'U16')
const boxElements = useMemo(
() => ({
index: indexBuffer,
attributes: { position, normal, uv },
drawElements: { mode: 'TRIANGLES', count: geometry.indices.length },
}),
[indexBuffer, geometry.indices.length, position, normal, uv],
)
const r1 = useVector3(PI / 4, PI, 0)
const p1 = useVector3(10, 0, 0)
const p2 = useVector3(20, 0, 0)
const p3 = useVector3(30, 0, 0)
const p4 = useVector3(40, 0, 0)
return (
<group rotation={r1}>
<geometry position={p1} {...boxElements} />
<geometry position={p2} {...boxElements} />
<geometry position={p3} {...boxElements} />
<geometry position={p4} {...boxElements} />
</group>
)
}
By default nothing will be rendered. You can set the renderOnUpdate
prop on the Canvas
component to true to have it work something like a regular react component tree. If the scene has lots of elements or is animating constantly it's going to make more sense to render it in more controlled way with the useRender
hook.
You can get a function to render the scene by calling useRender
anywhere in a React Vertex component tree. If your scene is animating constantly, it's probably best to have one loop right at the root of the tree that renders on each frame. You can use d3-timer
to create a loop like so:
import React, { useEffect } from 'react'
import { timer } from 'd3-timer'
import { useRender } from '@react-vertex/core'
function Scene() {
const renderScene = useRender()
useEffect(() => {
const timerLoop = timer(renderScene)
return () => timerLoop.stop()
}, [renderScene])
...
If you want to render when the camera moves. You can do something like the below example. If you look at the "Tuna Wireframe" example, it updates when the camera changes and ALSO sets the renderOnUpdate
prop on the canvas to true to make sure it renders when the controls in the scene update. If you are creating more of an app that has less frequent state updates and mainly responding to user input that's a pretty efficient way to approach it.
import React, { useEffect } from 'react'
import { useRender, useCanvasSize } from '@react-vertex/core'
import { useOrbitCamera, useOrbitControls } from '@react-vertex/orbit-camera'
function Scene() {
const { width, height } = useCanvasSize()
const renderScene = useRender()
const camera = useOrbitCamera(55, width / height, 1, 5000)
useOrbitControls(camera)
useEffect(() => {
renderScene()
camera.addListener(renderScene)
return () => camera.removeListener(renderScene)
}, [camera, renderScene])
...
You must have Yarn
(currently version 1.22.4) installed to run the repo.
git clone git@github.com:sghall/react-vertex.git
cd react-vertex
yarn install
npx lerna bootstrap
npx lerna run docs:dev
Go to http://localhost:3000/