Permalink
Switch branches/tags
Nothing to show
Find file Copy path
0cb5510 Sep 15, 2015
1 contributor

Users who have contributed to this file

89 lines (76 sloc) 2.4 KB

#OLED Screen Shots alt text

Below is a quick video demonstration the performance of the I2C OLED display. Video

#Source Code Code You will need the following Adafruit libraries:

Adafruit_SSD1306.h
Adafruit_GFX.h

In the settings.h file uncomment the following line OLED_128x64_ADAFRUIT_SCREENS

// Choose the display you will be using
// you will also have to uncomment the includes in the main project.
//#define TVOUT_SCREENS
#define OLED_128x64_ADAFRUIT_SCREENS

NOTE: only one screen can be use at a time.

In the main project uncomment the following lines

// uncomment depending on the display you are using.
// this is an issue with the arduino preprocessor
#ifdef TVOUT_SCREENS
//    #include <TVout.h>
//    #include <fontALL.h>
#endif
#ifdef OLED_128x64_ADAFRUIT_SCREENS
    #include <Adafruit_SSD1306.h>
    #include <Adafruit_GFX.h>
    #include <Wire.h>
    #include <SPI.h>
#endif

Make sure the you have selected the correct screen size in Adafruit_SSD1306.h

#define SSD1306_128_64
//   #define SSD1306_128_32
//   #define SSD1306_96_16

You may need to change the following line to be the correct I2C address for your OLED display. Found in here

display.begin(SSD1306_SWITCHCAPVCC, 0x3C);  // initialize with the I2C addr 0x3D (for the 128x64)

#OLED Diversity - Arduino Nano

####BOM

  • 3x 1k resistor
  • 3x 330 resistor
  • 2x rx5808 receiver with spi mod
  • 3x LEDs
  • 3x Momentary switch
  • 1x Toggle switch
  • 1x Buzzer (optional)
  • 1x 4066 digital switch chip
  • 1x Arduino Nano 3.0 328
  • 1x OLED 128x64 display I2C (5v tollerant)

####Schematic alt text

#OLED Basic - Arduino Nano (Not Diversity) You can comment out the following line to remove the diversity menu from the GUI. (Note: dip mode is still not implemented.)

#define USE_DIVERSITY

####BOM

  • 3x 1k resistor
  • 1x 330 resistor (optional)
  • 1x rx5808 receiver with spi mod
  • 1x LEDs (optional)
  • 3x Momentary switch
  • 1x Toggle switch
  • 1x Buzzer (optional)
  • 1x Arduino Nano 3.0 328
  • 1x OLED 128x64 display I2C (5v tollerant)

####Schematic alt text