Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
README.txt
RW_CRing.scad
RW_CRing.stl
RW_ClawLeft_Heavy.stl
RW_ClawRight_Heavy.stl
RW_Claw_original.stl
RW_Claws.scad
RW_CrankD345L8.mix
RW_CrankD345L8.stl
RW_FrameBL.mix
RW_FrameBL.stl
RW_FrameBL_original.stl
RW_FrameBL_shaft.scad
RW_FrameBL_shaft.stl
RW_FrameBR.mix
RW_FrameBR.stl
RW_FrameBR_original.stl
RW_FrameBR_shaft.scad
RW_FrameBR_shaft.stl
RW_Link.scad
RW_Link.stl
RW_MotorCover.mix
RW_MotorCover.stl
RW_MotorCover_Walls.scad
RW_MotorCover_Walls.stl

README.txt

This directory contains the parts modified for easier printing on  all home grade printers.
Parts are a bit heavier than the original but they should withstand more mechanical stress.

Parts list:

RW_CRing.stl .................... C "ring" ........... 8x (there's no O "ring")
RW_ClawLeft_Heavy.stl ........... Left Claw .......... 3x
RW_ClawRight_Heavy.stl .......... Right Claw ......... 3x
RW_CrankD345L8.stl .............. Crank .............. 2x
RW_FrameBR.stl .................. Right frame ........ 2x
RW_FrameBL.stl .................. Left frame ......... 2x
RW_Link.stl ..................... Axle link .......... 6x
RW_MotorCover.stl ............... Motor cover ........ 2x

Sources:

RW_CRing.scad ................... OpenSCAD source of the C "ring"
RW_Claw_original.stl ............ Original claw
RW_Claws.scad ................... OpenSCAD source for the claws
RW_CrankD345L8.mix .............. Meshmixer source of the crank
RW_FrameBL.mix .................. Meshmixer source of the left frame
RW_FrameBL_original.stl ......... Original left frame
RW_FrameBL_shaft.scad ........... OpenSCAD source of the left frame shaft
RW_FrameBL_shaft.stl ............ STL left frame shaft (user for the meshmixing)
RW_FrameBR.mix .................. Meshmixer source of the right frame
RW_FrameBR_original.stl ......... Original left frame
RW_FrameBR_shaft.scad ........... OpenSCAD source of the right frame shaft
RW_FrameBR_shaft.stl ............ STL right frame shaft (user for the meshmixing)
RW_Link.scad .................... OpenSCAD source of the axle link
RW_MotorCover.mix ............... Meshmixer source of the improved motor cover
RW_MotorCover_Walls.scad ........ OpenSCAD source of the walls improving the original
RW_MotorCover_Walls.stl ......... STL file used for meshmixer in addition to the original
You can’t perform that action at this time.