A fully parametric RepRap. Designed to suit local economies.
Switch branches/tags
Nothing to show
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
docs
mendel-stl
README
assembly.scad
bar-clamp.scad
belt-clamp.scad
bushing.scad
calibration.scad
config.scad
idler-washer.scad
pulley.scad
top-piece.scad
vertex.scad
x-carriage.scad
x-end-idler.scad
x-end-motor.scad
y-bushing-holders.scad
y-motor-mount.scad
z-coupler.scad

README

Mixtape Mendel Version 0.2 : http://reprap.org/wiki/Mixtape_mendel

  Mixtape Mendel - A Fully Parametric RepRap
    Copyright (C) 2011  Steve Kelly

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.



Thanks to all of the reprappers who have contributed great ideas and refinements.
Special thanks to jmil(Sent me the link to the Google Science Fair!), prusajr, spacexula, makergear, kliment, shhhh, colah, Emakershop, Adrian Bowyer, Ed Sells, Rhys Jones and everybody else on IRC/thingiverse/wiki that has helped or inspired this project.

Squaring (not even close to complete)
verticle sides = 267
top= 282
bottom side = 332
vertex to z clamp = 158
cross = 268
vertex to bar clamp for y = 37




|---------------------------------------|
| Mendel Bill of materials (incomplete) | 
|---------------------------------------|

RP (Rapid Prototype) Parts
	bar-clamp (6)
	vertex (2 regular, 2 mirrored)
	top-piece (2)
	

Hardware (incomplete)
	M8 Nuts - 48
	608 Bearings - 2
	M3x10mm - 12
	M3x12mm - 4
	M4 set screws - 4

Smooth Rod 
	330mm
	360mm
	400mmx2
	270mmx2

Threaded Rod 
	333mm x 8
	360mm X 2
	420mm x 2
	230mm x 2
		Cutting from 1m lengths...
		1: 333mm, 333mm, 333mm
		2: 333mm, 333mm, 333mm
		3: 333mm, 333mm, 230mm
		4: 420mm, 420mm
		5: 360mm, 360mm, 230mm

MDF 
	260mmx140mm (Lower bed)
	260mmx230mm (Print bed)

|------|
| TODO |
|------|

Version 0.3
	Document
	Make work for linear bearings and pla bushings. All else is irrelephant. 
	X end bushing mounts turned 90 degrees
	Huxley Class config
	better x belt routing
	vertex feet
	Pulley script (T5 T2.5)
	Endstops