- Boot from rootfs on encrypted storage, software raid, lvm or all of them together.
- Minimal rescue environment, also available remotely! SSH into initramfs before system boots, fix, for example, broken network scripts and boot it normaly.
- Choose rootfs over its LABEL or UUID, no more problems with wrong root variable because you added few hard disks.
- Debug, new kernel and kernel panic with unable to mount rootfs? Check in rescue shell if you have your disks in /dev, see dmesg if the kernel initialized hard disk controller.
- Support for LVM.
- Support for dmcrypt LUKS
- Support for software RAID
- Rescue shell
- Remote rescue shell, available over ssh.
- UUID/LABEL support for root and enc_root
- Support for TuxOnIce.
Clone git repository from github:
git clone https://github.com/slashbeast/better-initramfs.git
bootstrap/bootstrap-all make prepare make image
The first one will fetch Rob Landley's Aboriginal Linux root-filesystem image (about 25-27M), unpack it and prepare basic devices nodes (null, zero, random, urandom), next it will build in order busybox, lvm2, zlib, dropbear, libuuid, popt, libgpg-error, libgcrypt, cryptsetup and mdadm. The build process takes about 2 minutes on first generation mobile Core i5. As the build process is done in chroot, you need to do it as root. make prepare will copy binaries from bootstrap/output into sourceroot/bin. make image will pack sourceroot into cpio gzip archive. See about section for informations about why we build tools that way.
- drop to rescueshell just before mount rootfs to /newroot.
- Run sshd server. Let you ssh into initramfs on error, to input password for encrypted rootfs, or to fix something remotly.
- Wait X seconds after setting up sshd, useful when you want to login (and thus pause boot process) before booting real system.
- Setup sshd to listen on X port. Default: 22.
- Set an interface to what ssh deamon should bind to. Example: eth0
- Configure <addr> with <cidr> netmask on sshd_interface. Usualy you want something like '188.8.131.52/24'. If you will not add /CIDR, the IP will be configured with /32 thus you will be not able to connect to it no matter what, as we don't specify any gateway.
- Mount rootfs in read-write. Default: read-only.
- Don't check if kernel support devtmpfs, use mdev instead. (Useful for really old kernels).
- Get up raid arrays
- Run X after switching to newroot, Default: /sbin/init.
- try resuming with TuxOnIce. Remember to set resume= variable by kernel boot params.
- Use only with tuxonice switch, set resume device/file. This have nothing to do with initramfs..
- Scan all disks for volume groups and activate them.
- do cryptsetup luksOpen on enc_root variable.
- for example /dev/sda2 if sda2 is your encrypted rootfs. This variable is ignored if luks isn't enabled.
- for example /dev/mapper/enc_root if you have LUKS-encrypted rootfs, /dev/mapper/vg-rootfs or similar if lvm or just /dev/sdXX if you haven't rootfs over lvm or encrypted.
- rootfstype=<filesystem type>
- Set type of filesystem on your rootfs if you do not want to use 'auto',
- Set how many seconds initramfs should wait [for devices]. Useful for rootfs on USB device.
- pass X flag(s) to mount while mounting rootfs, you can use it to specify which btrfs subvolume you want to mount.
Rootfs over encrypted lvm's pv (extlinux config):
LABEL kernel1_bzImage-3.2.2-frontier2 MENU LABEL Gentoo Linux bzImage-3.2.2-frontier2 LINUX /bzImage-3.2.2-frontier2 INITRD /initramfs.cpio.gz APPEND rootfstype=ext4 luks enc_root=/dev/sda2 lvm root=/dev/mapper/vg-rootfs
Rootfs over software raid1 with remote rescueshell and rootfs over LABEL:
LABEL kernel1_bzImage-3.2.2-frontier2 MENU LABEL Gentoo Linux bzImage-3.2.2-frontier2 LINUX /bzImage-3.2.2-frontier2 INITRD /initramfs.cpio.gz APPEND softraid root=LABEL=rootfs sshd sshd_wait=10 sshd_port=2020 sshd_interface=eth0 sshd_ipv4=172.16.0.8/24
The better-initramfs started from the need to boot from dmcrypted rootfs and the genkernel's initramfs looked like wrong idea in so many ways. Later I was in need to support LVM, LVM over dmcrypt and dmcrypt over LVM, it ended with a several copies of code 'cryptlvm-initramfs' 'lvmcrypt-initramfs' and so on. So I decided to rename one of the 'best' copies into better-initramfs and make it flexible yet simple to read, understand and improve. The better-initramfs is host independent, thanks to the Aboriginal linux, we do build all the tools (and its deps) inside Aboriginal, with uClibc. The uClibc have many adventages over common used glibc, it is not so bloated, the static binaries are really static (static dropbear still need glibc's libc, libnss and friends to work!) and the size of uclibc-powered binaries is about 50% or even more smaller than the glibc one. For me, better-initramfs's (remote)rescueshell, among other features, is great replacement for livecd and other rescue systems for most of the incidents when I need to change/fix/adjust something what can't be done on booted system.
This code is released under Simplified BSD License, see LICENSE for more information.
- better-initramfs maintained by:
- Piotr Karbowski <email@example.com> Check contributors in git log.