New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Strange perpendicular extrusions at the top and bottom of thin walls #1875

Closed
whosawhatsis opened this Issue Mar 29, 2014 · 3 comments

Comments

Projects
None yet
4 participants
@whosawhatsis

whosawhatsis commented Mar 29, 2014

I'm seeing these strange extrusion lines perpendicular to thin walls on the top and bottom layers. No idea where they're coming from, but they're putting weird edges on otherwise beautiful prints.

screen shot 2014-03-28 at 6 26 42 pm

STL, gcode, and profile:

https://www.dropbox.com/s/nonr1oieb1z1w7g/perpendicular%20extrusions.zip

@alexrj alexrj added this to the 1.1.1 milestone Apr 6, 2014

@alexrj alexrj added the Thin walls label Apr 6, 2014

@ledvinap

This comment has been minimized.

Show comment
Hide comment
@ledvinap

ledvinap Apr 11, 2014

Collaborator

Current master (maybe with last clipper fix) does much better job (no perpendicular artifacts), but there is artifact from medial-axis on both hollow cylinders - ends of extrusion do overlap.
circles
gray is surface, green is medial-axis

Collaborator

ledvinap commented Apr 11, 2014

Current master (maybe with last clipper fix) does much better job (no perpendicular artifacts), but there is artifact from medial-axis on both hollow cylinders - ends of extrusion do overlap.
circles
gray is surface, green is medial-axis

@ednisley

This comment has been minimized.

Show comment
Hide comment
@ednisley

ednisley Apr 16, 2014

Those artifacts kill thin-walled objects, because they're not buried inside the infill. I use a version of the classic thinwall box to verify the extrusion settings:
thinwall open box - 2 layers

That's cut down to 2 layers to reduce the clutter; normally it's 5 mm tall.

Slicing with either the default configuration or my usual one, using 1.1.1-dev (93f4fe0) produces the same extensions on one "corner" of the square:

thinwall open box - slice error layer 2

A detail view of that corner:

thinwall open box - slice error layer 2 - detail

This has become a showstopper for me, as many of the gadgets I build depend on thin walls. The binary 1.1.0 version doesn't run on Ubuntu 13.10 x86_64 (#1877) and binary 1.0.0 locks up solid with my usual configuration on that STL file.

Is there a workaround for this problem?

All the files are on my Dropbox account:

https://www.dropbox.com/sh/tmhp5ox0jfbw5c7/W-jJ3V-O9C

Thanks for any advice...

ednisley commented Apr 16, 2014

Those artifacts kill thin-walled objects, because they're not buried inside the infill. I use a version of the classic thinwall box to verify the extrusion settings:
thinwall open box - 2 layers

That's cut down to 2 layers to reduce the clutter; normally it's 5 mm tall.

Slicing with either the default configuration or my usual one, using 1.1.1-dev (93f4fe0) produces the same extensions on one "corner" of the square:

thinwall open box - slice error layer 2

A detail view of that corner:

thinwall open box - slice error layer 2 - detail

This has become a showstopper for me, as many of the gadgets I build depend on thin walls. The binary 1.1.0 version doesn't run on Ubuntu 13.10 x86_64 (#1877) and binary 1.0.0 locks up solid with my usual configuration on that STL file.

Is there a workaround for this problem?

All the files are on my Dropbox account:

https://www.dropbox.com/sh/tmhp5ox0jfbw5c7/W-jJ3V-O9C

Thanks for any advice...

@alexrj

This comment has been minimized.

Show comment
Hide comment
@alexrj

alexrj May 21, 2014

Member

Fixed! And added a regression test.

Member

alexrj commented May 21, 2014

Fixed! And added a regression test.

@alexrj alexrj closed this May 21, 2014

@alexrj alexrj added the Fixed label May 21, 2014

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment