Add weight/cost output to gcode. On the way to #647

lib/Slic3r/GUI/Plater.pm

@@ -142,6 +142,7 @@ sub new {
                         $self->stop_background_process;
                         $self->statusbar->SetStatusText("Slicing cancelled");
                         $self->{preview_notebook}->SetSelection(0);
+
                     });
                     $self->start_background_process;
                 } else {
@@ -431,6 +432,36 @@ sub new {
                 }
             }
         }
+
+        my $print_info_sizer;
+        {
+            my $box = Wx::StaticBox->new($self, -1, "Sliced Info");
+            $print_info_sizer = Wx::StaticBoxSizer->new($box, wxVERTICAL);
+            $print_info_sizer->SetMinSize([350,-1]);
+            my $grid_sizer = Wx::FlexGridSizer->new(2, 2, 5, 5);
+            $grid_sizer->SetFlexibleDirection(wxHORIZONTAL);
+            $grid_sizer->AddGrowableCol(1, 1);
+            $grid_sizer->AddGrowableCol(3, 1);
+            $print_info_sizer->Add($grid_sizer, 0, wxEXPAND);
+            my @info = (
+                fil_cm  => "Used Filament (cm)",
+                fil_cm3 => "Used Filament (cm^3)",
+                fil_g   => "Used Filament (g)",
+                cost    => "Cost",
+            );
+            while (my $field = shift @info) {
+                my $label = shift @info;
+                my $text = Wx::StaticText->new($self, -1, "$label:", wxDefaultPosition, wxDefaultSize, wxALIGN_RIGHT);
+                $text->SetFont($Slic3r::GUI::small_font);
+                $grid_sizer->Add($text, 0);
+
+                $self->{"print_info_$field"} = Wx::StaticText->new($self, -1, "", wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
+                $self->{"print_info_$field"}->SetFont($Slic3r::GUI::small_font);
+                $grid_sizer->Add($self->{"print_info_$field"}, 0);
+            }
+            $self->{"sliced_info_box"} = $print_info_sizer;
+
+        }
 
         my $buttons_sizer = Wx::BoxSizer->new(wxHORIZONTAL);
         $buttons_sizer->AddStretchSpacer(1);
@@ -444,6 +475,9 @@ sub new {
         $right_sizer->Add($buttons_sizer, 0, wxEXPAND | wxBOTTOM, 5);
         $right_sizer->Add($self->{list}, 1, wxEXPAND, 5);
         $right_sizer->Add($object_info_sizer, 0, wxEXPAND, 0);
+        $right_sizer->Add($print_info_sizer, 0, wxEXPAND, 0);
+        $right_sizer->Hide($print_info_sizer);
+        $self->{"right_sizer"} = $right_sizer;
 
         my $hsizer = Wx::BoxSizer->new(wxHORIZONTAL);
         $hsizer->Add($self->{preview_notebook}, 1, wxEXPAND | wxTOP, 1);
@@ -1090,6 +1124,11 @@ sub async_apply_config {
     if ($invalidated) {
         # kill current thread if any
         $self->stop_background_process;
+        # remove the sliced statistics box because something changed.
+        if ($self->{"right_sizer"}) { 
+            $self->{"right_sizer"}->Hide($self->{"sliced_info_box"});
+            $self->{"right_sizer"}->Layout;
+        }
     } else {
         $self->resume_background_process;
     }
@@ -1263,6 +1302,8 @@ sub export_gcode {
 
     # this updates buttons status
     $self->object_list_changed;
+    $self->{"right_sizer"}->Show($self->{"sliced_info_box"});
+    $self->{"right_sizer"}->Layout;
 
     return $self->{export_gcode_output_file};
 }
@@ -1357,6 +1398,10 @@ sub on_export_completed {
     $self->send_gcode if $send_gcode;
     $self->{print_file} = undef;
     $self->{send_gcode_file} = undef;
+    $self->{"print_info_cost"}->SetLabel(sprintf("%.2f" , $self->{print}->total_cost));
+    $self->{"print_info_fil_g"}->SetLabel(sprintf("%.2f" , $self->{print}->total_weight));
+    $self->{"print_info_fil_cm3"}->SetLabel(sprintf("%.2f" , $self->{print}->total_extruded_volume) / 1000);
+    $self->{"print_info_fil_cm"}->SetLabel(sprintf("%.2f" , $self->{print}->total_used_filament) / 10);
 
     # this updates buttons status
     $self->object_list_changed;
@@ -1553,7 +1598,10 @@ sub update {
     } else {
         $self->resume_background_process;
     }
-
+    if ($self->{"right_sizer"}) { 
+        $self->{"right_sizer"}->Hide($self->{"sliced_info_box"});
+        $self->{"right_sizer"}->Layout;
+    }
     $self->refresh_canvases;
 }
 
@@ -1627,6 +1675,10 @@ sub on_config_change {
             $self->Layout;
         }
     }
+    if ($self->{"right_sizer"}) { 
+        $self->{"right_sizer"}->Hide($self->{"sliced_info_box"});
+        $self->{"right_sizer"}->Layout;
+    }
 
     return if !$self->GetFrame->is_loaded;
 

lib/Slic3r/GUI/Tab.pm

@@ -897,7 +897,7 @@ sub build {
     my $self = shift;
 
     $self->init_config_options(qw(
-        filament_colour filament_diameter filament_notes filament_max_volumetric_speed extrusion_multiplier
+        filament_colour filament_diameter filament_notes filament_max_volumetric_speed extrusion_multiplier filament_density filament_cost
         temperature first_layer_temperature bed_temperature first_layer_bed_temperature
         fan_always_on cooling
         min_fan_speed max_fan_speed bridge_fan_speed disable_fan_first_layers
@@ -912,6 +912,8 @@ sub build {
             $optgroup->append_single_option_line('filament_colour', 0);
             $optgroup->append_single_option_line('filament_diameter', 0);
             $optgroup->append_single_option_line('extrusion_multiplier', 0);
+            $optgroup->append_single_option_line('filament_density', 0);
+            $optgroup->append_single_option_line('filament_cost', 0);
         }
 
         {

lib/Slic3r/Print/GCode.pm

@@ -255,17 +255,33 @@ sub export {
     $self->print->clear_filament_stats;
     $self->print->total_used_filament(0);
     $self->print->total_extruded_volume(0);
+    $self->print->total_weight(0);
+    $self->print->total_cost(0);
     foreach my $extruder (@{$gcodegen->writer->extruders}) {
         my $used_filament = $extruder->used_filament;
         my $extruded_volume = $extruder->extruded_volume;
+        my $filament_weight = $extruded_volume * $extruder->filament_density / 1000;
+        my $filament_cost = $filament_weight * ($extruder->filament_cost / 1000);
         $self->print->set_filament_stats($extruder->id, $used_filament);
 
         printf $fh "; filament used = %.1fmm (%.1fcm3)\n",
             $used_filament, $extruded_volume/1000;
+        if ($filament_weight > 0) {
+            $self->print->total_weight($self->print->total_weight + $filament_weight);
+            printf $fh "; filament used = %.1fg\n",
+                   $filament_weight;
+            if ($filament_cost > 0) {
+                $self->print->total_cost($self->print->total_cost + $filament_cost);
+                printf $fh "; filament cost = %.1f\n",
+                       $filament_cost;
+            }
+        }
 
         $self->print->total_used_filament($self->print->total_used_filament + $used_filament);
         $self->print->total_extruded_volume($self->print->total_extruded_volume + $extruded_volume);
     }
+    printf $fh "; total filament cost = %.1f\n",
+           $self->print->total_cost;
 
     # append full config
     print $fh "\n";

lib/Slic3r/Print/Object.pm

@@ -417,6 +417,8 @@ sub generate_support_material {
     $self->_support_material->generate($self);
 
     $self->set_step_done(STEP_SUPPORTMATERIAL);
+    my $stats = "Weight: %.1fg, Cost: %.1f" , $self->print->total_weight, $self->print->total_cost;
+    $self->print->status_cb->(85, $stats);
 }
 
 sub _support_material {

xs/src/libslic3r/Extruder.cpp

@@ -111,6 +111,18 @@ Extruder::filament_diameter() const
     return this->config->filament_diameter.get_at(this->id);
 }
 
+double
+Extruder::filament_density() const
+{
+    return this->config->filament_density.get_at(this->id);
+}
+
+double
+Extruder::filament_cost() const
+{
+    return this->config->filament_cost.get_at(this->id);
+}
+
 double
 Extruder::extrusion_multiplier() const
 {

xs/src/libslic3r/Extruder.hpp

@@ -29,6 +29,8 @@ class Extruder
     double used_filament() const;
 
     double filament_diameter() const;
+    double filament_density() const;
+    double filament_cost() const;
     double extrusion_multiplier() const;
     double retract_length() const;
     double retract_lift() const;

xs/src/libslic3r/Print.hpp

@@ -167,7 +167,7 @@ class Print
     PrintRegionPtrs regions;
     PlaceholderParser placeholder_parser;
     // TODO: status_cb
-    double total_used_filament, total_extruded_volume;
+    double total_used_filament, total_extruded_volume, total_cost, total_weight;
     std::map<size_t,float> filament_stats;
     PrintState<PrintStep> state;
 

xs/src/libslic3r/PrintConfig.cpp

@@ -355,6 +355,30 @@ PrintConfigDef::PrintConfigDef()
         opt->values.push_back(3);
         def->default_value = opt;
     }
+
+    def = this->add("filament_density", coFloats);
+    def->label = "Density";
+    def->tooltip = "Enter your filament density here. This is only for statistical information. A decent way is to weigh a known length of filament and compute the ratio of the length to volume. Better is to calculate the volume directly through displacement.";
+    def->sidetext = "g/cm^3";
+    def->cli = "filament-density=f@";
+    def->min = 0;
+    {
+        ConfigOptionFloats* opt = new ConfigOptionFloats();
+        opt->values.push_back(0);
+        def->default_value = opt;
+    }
+
+    def = this->add("filament_cost", coFloats);
+    def->label = "Cost";
+    def->tooltip = "Enter your filament cost per kg here. This is only for statistical information.";
+    def->sidetext = "money/kg";
+    def->cli = "filament-cost=f@";
+    def->min = 0;
+    {
+        ConfigOptionFloats* opt = new ConfigOptionFloats();
+        opt->values.push_back(0);
+        def->default_value = opt;
+    }
 
     def = this->add("filament_settings_id", coString);
     def->default_value = new ConfigOptionString("");

xs/src/libslic3r/PrintConfig.hpp

@@ -289,6 +289,8 @@ class GCodeConfig : public virtual StaticPrintConfig
     ConfigOptionString              extrusion_axis;
     ConfigOptionFloats              extrusion_multiplier;
     ConfigOptionFloats              filament_diameter;
+    ConfigOptionFloats              filament_density;
+    ConfigOptionFloats              filament_cost;
     ConfigOptionFloats              filament_max_volumetric_speed;
     ConfigOptionBool                gcode_comments;
     ConfigOptionEnum<GCodeFlavor>   gcode_flavor;
@@ -322,6 +324,8 @@ class GCodeConfig : public virtual StaticPrintConfig
         OPT_PTR(extrusion_axis);
         OPT_PTR(extrusion_multiplier);
         OPT_PTR(filament_diameter);
+        OPT_PTR(filament_density);
+        OPT_PTR(filament_cost);
         OPT_PTR(filament_max_volumetric_speed);
         OPT_PTR(gcode_comments);
         OPT_PTR(gcode_flavor);

xs/xsp/Extruder.xsp

@@ -42,6 +42,8 @@
         %code%{ RETVAL = THIS->retract_speed_mm_min; %};
 
     double filament_diameter();
+    double filament_density();
+    double filament_cost();
     double extrusion_multiplier();
     double retract_length();
     double retract_lift();

xs/xsp/Print.xsp

@@ -288,5 +288,26 @@ Print::total_extruded_volume(...)
     OUTPUT:
         RETVAL
 
+
+double
+Print::total_weight(...)
+    CODE:
+        if (items > 1) {
+            THIS->total_weight = (double)SvNV(ST(1));
+        }
+        RETVAL = THIS->total_weight;
+    OUTPUT:
+        RETVAL
+
+double
+Print::total_cost(...)
+    CODE:
+        if (items > 1) {
+            THIS->total_cost = (double)SvNV(ST(1));
+        }
+        RETVAL = THIS->total_cost;
+    OUTPUT:
+        RETVAL
+
 %}
 };