From 9a16a6a4f5f96d5e1ea254c28bd64ef7b10b51cb Mon Sep 17 00:00:00 2001
From: okaegi <okaegi@pinball4you.ch>
Date: Fri, 20 Aug 2021 18:26:05 +0200
Subject: [PATCH] acthor leistungsabfrage

Es wird nun beim jeden durchlauf immer ein Return file geschrieben
---
 modules/smarthome/acthor/watt.py | 44 ++++++++++++++++----------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/modules/smarthome/acthor/watt.py b/modules/smarthome/acthor/watt.py
index 1c89a6967..34a9b5cd0 100644
--- a/modules/smarthome/acthor/watt.py
+++ b/modules/smarthome/acthor/watt.py
@@ -40,34 +40,28 @@
         faktor = 6000/instpower
     else:
         faktor = 3000/instpower
+pvmodus = 0
+if os.path.isfile(file_stringpv):
+   f = open( file_stringpv , 'r')
+   pvmodus =int(f.read())
+   f.close()
+powerc = 0
+# aktuelle Leistung lesen
+client = ModbusTcpClient(ipadr, port=502)
+#
+#
+start = 1000
+resp=client.read_holding_registers(start,10,unit=1)
+value1 = resp.registers[0]
+all = format(value1, '04x')
+aktpower= int(struct.unpack('>h',codecs.decode(all, 'hex'))[0])
 if count5==0:
-   # pv modus
-   pvmodus = 0
-   if os.path.isfile(file_stringpv):
-      f = open( file_stringpv , 'r')
-      pvmodus =int(f.read())
-      f.close()
-   # log counter
    count1 = 999
    if os.path.isfile(file_stringcount):
       f = open( file_stringcount , 'r')
       count1 =int(f.read())
       f.close()
    count1=count1+1
-   # aktuelle Leistung lesen
-   client = ModbusTcpClient(ipadr, port=502)
-   #
-   #
-   start = 1000
-   resp=client.read_holding_registers(start,10,unit=1)
-   #
-   #start = 3524
-   #resp=client.read_input_registers(start,10,unit=1)
-   #
-   value1 = resp.registers[0]
-   all = format(value1, '04x')
-   #aktpower= int(struct.unpack('>h', all.decode('hex'))[0])
-   aktpower= int(struct.unpack('>h',codecs.decode(all, 'hex'))[0])
    value1 = resp.registers[3]
    all = format(value1, '04x')
    status= int(struct.unpack('>h',codecs.decode(all, 'hex') )[0])
@@ -110,7 +104,6 @@
    # test only
    #json return power = aktuelle Leistungsaufnahme in Watt, on = 1 pvmodus, powerc = counter in kwh
    #answer = '{"power":225,"on":0} '
-   powerc = 0
    answer = '{"power":' + str(aktpower) + ',"powerc":' + str(powerc) + ',"on":' + str(pvmodus) + '} '
    f1 = open('/var/www/html/openWB/ramdisk/smarthome_device_ret' + str(devicenumber), 'w')
    json.dump(answer,f1)
@@ -136,3 +129,10 @@
    f = open( file_stringcount , 'w')
    f.write(str(count1))
    f.close()
+else:
+   if pvmodus == 99:
+      pvmodus = 0
+   answer = '{"power":' + str(aktpower) + ',"powerc":' + str(powerc) + ',"on":' + str(pvmodus) + '} '
+   f1 = open('/var/www/html/openWB/ramdisk/smarthome_device_ret' + str(devicenumber), 'w')
+   json.dump(answer,f1)
+   f1.close()
\ No newline at end of file